|
Register Now
Wednesday, October 16, 2019; 11:00 AM - 12:00 PM Eastern
Cost: FREE
This webinar will present the findings from a failure investigation that was associated with the failure of coatings applied to partially galvanized structural columns. The columns were used for an expansion at a petrochemical facility. The design had the lower column sections inside of an interior controlled environment. These lower portions were not included in the hot-dip galvanizing process and received a standard shop primer for structural steel. The investigation and solutions to avoid such failures in the future are discussed.
|
Downloadable File:
(right-click and choose 'Save Target As' to download; all downloads are copyright of their author.)
|
Presenter:
Rich Burgess, PCS Senior Consultant KTA-Tator, Inc.
Rich Burgess is a Senior Consultant for KTA where he has been employed for over 28 years. He is a NACE Certified Coatings Inspector Level 3 (Peer Review), an SSPC Certified Protective Coatings Specialist, an SSPC C-3 Supervisor/Competent Person for Deleading of Industrial Structures, is a principal instructor for the SSPC C-1, C-2, C-3, and C-5 courses, and has served as an instructor for the NACE CIP Program. He also serves as an instructor for a variety of KTA-offered training seminars.
|
Register Now
|
Tagged categories:
Authors;
Hot-dip galvanizing;
KTA-Tator;
North America;
PaintSquare;
Richard Burgess
|
|
|
Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233
TEL 1-412-431-8300 • FAX 1-412-431-5428 • EMAIL webmaster@paintsquare.com
|
The Technology Publishing Network
|
|
|
|
|