from JPCL, November 2019 ; by Rick Huntley, KTA-Tator, Inc.; and Dan Boich, St. Lawrence Seaway Management Corporation
Since its opening, the St. Lawrence Seaway has moved more than 2.5 billion metric ton...
|
|
from JPCL, November 2019
|
|
from JPCL, September 2019 ; by Ahsan Chowdhury, Halifax Harbour Bridges; and Kenneth A. Trimber, KTA-Tator, Inc.
There are many unique challenges related to bridge corrosion-protection projects. Thi...
|
|
from JPCL, April 2019 ; by Jay Kunick, Fischer Technology, Inc.
Thermally sprayed aluminium (TSA) coatings can offer long-term corrosion protection f...
|
|
from JPCL, April 2019
|
|
from JPCL, March 2019
|
|
from JPCL, December 2018 ; by Katharine Stay, IRATA International
The use of modern industrial skilled rope access teams began over three decades ago i...
|
|
from JPCL, September 2018
|
|
from JPCL, July 2018
|
|
from JPCL, July 2018
|
|
from JPCL, June 2018
|
|
from PaintSquare Press, Summer 2018
|
|
from JPCL, June 2018 ; by Anders Voldsgaard Clausen, Hempel A/S
Offshore wind farms require high-performance coatings that can protect the structures...
|
|
from JPCL, April 2018 ; by Patrick Cassidy and James A. Ellor, P.E., Elzly Technology Corporation; and John Wegand, James Martin, Paul Slebodnick and James Tagert, U.S. Naval Research Laboratory
Over the past 20 years, the U.S. Navy has implemented the use of advanced ultra-high-...
|
|
from JPCL, November 2017 ; by Alan Walker, Safinah Ltd.
The operators of seagoing vessels are only profitable when they’re carrying cargo and...
|
|
from JPCL, September 2017 ; by Mark B. Dromgool, KTA-Tator Australia Pty Ltd
Due to the risks of hydrocarbon fires or explosions and the fragility of some operati...
|
|
from JPCL, August 2017
PaintSquare Comments, Top 10 News, Poll
|
|
from JPCL, June 2017 ; by Bobbi Jo Merten, Ph.D. and Jessica Torrey, Ph.D., U.S. Department Of Interior, Bureau Of Reclamation
The authors present a life-cycle costing (LCC) system that provides an economic basis...
|
|
from JPCL, April 2017
|
|
from JPCL, April 2017
|
|
from JPCL, March 2017 ; by Philippe Le Calvé, Anticorr Conseil; and Christian Favennec And Nicolas Bocca, DCNS
Studies compare waterjetting and abrasive blasting on zinc primers in severe marine e...
|
|
from JPCL, March 2017
|
|
from JPCL, February 2017 ; by Don Schnell, Polygon US Corp
Along with changes in coating technology and application techniques has come a demand...
|
|
from JPCL, February 2017
|
|
from JPCL, December 2016 ; by Peter Kronborg Nielsen, FORCE Technology
Following an uncertain start, the present offshore coatings systems for wind farms ha...
|
|
from JPCL, November 2016 ; by Erick Iezzi and James Tagert, U.S. Naval Research Laboratory
This article details a recently developed, novel moisture-curable, haze gray single-c...
|
|
from JPCL, October 2016 ; by Peter Bock, CUI Specialist, Consultant
|
|
from JPCL, July 2016 ; by James McCarthy, PPG Protective and Marine Coatings
|
|
from JPCL, July 2016 ; by Peter Bock, CUI Specialist, Consultant
|
|
from JPCL, May 2016
|
|
from JPCL, April 2016
|
|
from JPCL, March 2016 ; by Günter Binder, Federal Waterways Engineering and Research Institute (BAW)
The author compares the accuracy of laboratory test results to that of long-term test...
|
|
from JPCL, February 2016 ; by Peter Bock
When the length of the riser piping on an oil production platform increases for struc...
|
|
from JPCL, January 2016
|
|
from JPCL, November 2015
|
|
from JPCL, November 2015 ; by Brian Goldie, JPCL
Producing surfaces with high resistance to marine fouling and a high level of barnacl...
|
|
from JPCL, Coatings Professionals: The Next Generation 2015 Special Issue
|
|
from JPCL, July 2015 ; by Nuno Cipriano, Ultrablast Lassarat Ltd., Brazil
This article describes how these combined technologies in newbuilding projects can pr...
|
|
from JPCL, June 2015 ; by Hugues Dedeurwaerder, Coatings Research Institute
To ensure durability and corrosion protection in aggressive climates, the author disc...
|
|
from JPCL, March 2015 ; by Hee-Baek Lee, Chung-Seo Park, Seong-Mo Son, Kyung-Jin Park
In an effort to determine the best solution for mitigating cavitation erosion of rudd...
|
|
from JPCL, February 2015 ; by Mark B. Dromgool, KTA-Tator Australia Pty Ltd
This article, the second in a two-part series, explains a three-pillar approach to ac...
|
|
from JPCL, November 2014 ; by Erick Iezzi, James Tagert, James Martin, Paul Slebodnick and John Wegand U.S. Naval Research Laboratory, Center for Corrosion Science and Engineering
This article details the development and testing of a sprayable siloxane, non-skid co...
|
|
from JPCL, September 2014 ; by Mark B. Dromgool, KTA-Tator Australia Pty Ltd
This article, the first in a two-part series, focuses on the use of coatings to fight...
|
|
from JPCL, The Facility Owner's Perspective 2014 Special Issue; by Pamela Simmons, Editor in Chief, JPCL
The U.S. Bureau of Reclamation was established in 1902 and today is the largest whole...
|
|
from JPCL, August 2014 ; by Ronny Van Poppel, Smulders Group
This article describes the shop coating processes used to coat steel jacket parts for...
|
|
from JPCL, The Facility Owner's Perspective 2014 Special Issue; by Katie Urbas, Planning Supervisor — Blast, Paint, General, and Temporary Services, General Dynamics NASSCO
General Dynamics NASSCO shipyard began to transform the way that it produced ships in...
|
|
from JPCL, July 2014 ; by Brian Goldie and Dan Mobbs, JPCL Europe
Antifouling coatings can increase fuel efficiency by reducing frictional resistance. ...
|
|
from JPCL, June 2014 ; by Sang Ki Chi, Seung Hyun Kim, and Byung Wan Kim Institute of Industrial Technology, Samsung Heavy Industries Co., Ltd.
To capitalize on the environmental and cost benefits of employing silicone foul-relea...
|
|
from JPCL, May 2014 ; by Dr. Bobbi Jo E. Merten; Richard Pepin, PCS; Dr. David Tordonato, P.E.; and Dr. Allen Skaja, PCS; Bureau of Reclamation
The authors describe the strategies used by the Bureau of Reclamation’s facility
per...
|
|
from JPCL, May 2014
|
|
from JPCL, February 2014 ; by Daniel Totev, Air Products and Chemicals Europe B.V., and Marcelo Rufo, Air Products Brasil Ltda.
This article reviews the basics of high-solids epoxy coatings compared to conventiona...
|
|
from JPCL, November 2013 ; by Dr. David Tordonato, P.E., and Dr. Allen Skaja, P.C.S., U.S. Bureau of Reclamation
The authors discuss the use of metalizing, or thermal spray coating (TSC) application...
|
|
from JPCL, November 2013
Do water treatment processes to stop the transfer of invasive marine species in balla...
|
|
from JPCL, October 2013 ; by JPCL Staff
The 2013 JPCL Coating Systems Buying Guide lists more than 4,400 recommendations for ...
|
|
from JPCL, Three Decades of Change in the Coatings Industry 2013 Special Issue; by Alison B. Kaelin, CQA, ABKaelin, LLC
|
|
from JPCL, August 2013 ; by David Hunter, Mascoat, and Kevin Turpin, PK Technology
|
|
from JPCL, May 2013 ; by Rob Portsmouth, Huntsman Pigments
This article describes the background of solar reflective coatings technology and dis...
|
|
from JPCL, March 2013 ; by Trevor Parry, Coating Consultant, and Bill Woods, Marinspec Associates Ltd.
The authors identify some of the stresses that marine cargo tank coatings may face du...
|
|
from JPCL, November 2012 ; by Johnny Eliasson, ABS
The author describes, in general terms, why hull resistance to biofouling and its man...
|
|
from JPCL, August 2012 ; by Brian Goldie, JPCL
This article reviews the Performance Standard for Protective Coatings for Cargo Oil T...
|
|
from JPCL, May 2012 ; by Charles Lange, Paint BidTracker
|
|
from JPCL, March 2012 ; by Roy Nedal, Marine Service International AS
The author gives a contractor’s view of the present state of ship coating maintenance...
|
|
from JPCL, March 2012 ; by Charles Lange, Paint BidTracker
|
|
from JPCL, February 2012 ; by Massimo Cornago, Consultant
The author describes the approach of one oil company in the selection of different co...
|
|
from JPCL, January 2012 ; by Fred Goodwin, BASF Corp., Construction Chemicals
In this inaugural article of JPCL's 2012 Top Thinkers: The Clive Hare Honors series, ...
|
|
from JPCL, November 2011 ; by Allen Skaja, Ph.D.; and David Tordonato, Ph.D. U.S. Bureau of Reclamation
The authors discuss the Bureau of Reclamation’s second year of testing coatings to co...
|
|
from JPCL, November 2011 ; by J. Peter Ault, PE, PCS, Elzly Technology Corporation
The author describes research on retaining inorganic zinc pre-contruction primers (PC...
|
|
from JPCL, May 2011 ; by Philippe Le Calvé, DCNS, France; Jean-Pierre Pautasso, Direction Générale de I’Armement, France; and Nathalie Le Bozec, French Corrosion Institute
The authors report on the first part of a study on the use of UHP waterjetting for se...
|
|
from JPCL, May 2011
|
|
from JPCL, May 2011
|
|
from JPCL, April 2011 ; by Brian Goldie, JPCL
This article reviews presentations made at a one-day workshop in London organized by ...
|
|
from JPCL, April 2011 ; by Jodi Temyer, JPCL
SSPC presented the fifth annual structure awards at
SSPC 2011 featuring GreenCOAT, h...
|
|
from JPCL, August 2010 ; by Fernando Lehrer, ABS Product Development, Nautical Systems
The author discusses the American Bureau of Shipping's
software-based Hull Inspectio...
|
|
from JPCL, July 2010
|
|
from JPCL, July 2010 ; by Allen Skaja, U.S. Bureau of Reclamation
|
|
from JPCL, June 2010 ; by Martin Earlam, UK Environment Agency
Ship collision gives water jetting roles in environmental protection, Barrier coating...
|
|
from JPCL, June 2010
|
|
from JPCL, May 2010 ; by Kenneth B. Tator, KTA-Tator, Inc. and Richard A. Burgess, KTA-Tator, Inc., Series Editor
|
|
from JPCL, April 2010
|
|
from JPCL, April 2010 ; by JPCL Staff
|
|
from JPCL, March 2010 ; by Russ Brown, Munters Corporation
The author reports on the use of desiccant dehumidification and climate control equip...
|
|
from JPCL, February 2010
|
|
from JPCL, February 2010
|
|
from JPCL, November 2009 ; by Andreas W. Momber, Ph.D., Muehlhan AG; Peter Plagemann, Ph.D., and Volkmar Stenzel, Ph.D., Fraunhofer Institute for Manufacturing and Applied Materials Research; and Michael Schneider, Ph.D., Fraunhofer Institute for Ceramic Technologies and Systems
In Part 3 of a three-part series, the authors report on corrosive stress on offshore ...
|
|
from JPCL, November 2009
Association, company, and product news
|
|
from JPCL, November 2009 ; by Serafin Barreiro, Hempel A/S, Kgs.
The author reports on a laboratory study intended to devise an appropriate test metho...
|
|
from JPCL, October 2009
|
|
from JPCL, October 2009
|
|
from JPCL, October 2009
|
|
from JPCL, September 2009
|
|
from JPCL, August 2009
Regulation News: OSHA's Maritime Advisory Committee to Meet
|
|
from JPCL, August 2009 ; by Michael Donkin, International Paint Ltd.
Massive changes have occurred in coating formulation for the heavy-duty market in the...
|
|
from JPCL, August 2009 ; by Michael Babiarz, Line-X Protective Coatings
"All accidents can be prevented, and the goal is zero injuries."
|
|
from JPCL, June 2009 ; by Cynthia L. O'Malley, KTA-Tator, Inc.; Richard Burgess, KTA-Tator, Inc. Series Editor
Anticipating the Service Environment for Proper Coating System Selection
|
|
from JPCL, April 2009 ; by Andreas W. Momber, Ph.D., Muehlhan AG; Peter Plagemann, Ph.D., and Volkmar Stenzel, Ph.D., Fraunhofer Institute for Manufacturing and Applied Materials Research; and Michael Schneider, Ph.D., Fraunhofer Institute for Ceramic Technologies and Systems
In Part 2 of a three-part series, the authors report on testing the coating performan...
|
|
from JPCL, January 2008
In August 2006, the USS Abraham Lincoln aircraft carrier cruised into Puget Sound in ...
|
|
from JPCL, January 2008 ; by Rick A. Huntley
The author discusses variables that affect the results of moisture vapor transmission...
|
|