PaintSquare Daly News on Tablet
PaintSquare Daily News is available in three editions:
Industrial Only
Commercial Only
Combined Industrial & Commercial

Your free subscription also includes:
Special topical editions and Weekend Brief—a recap of the week’s top news and some great in-depth reads.

Subscribe now: paintsquare.com/psdn
 
 

 

Problem Solving Forum (32)


What kind of training and credentials are needed in the U.S. for industrial painters who work near live wires?


When refurbishing an old concrete secondary containment wall around a storage tank, what criteria should be used to determine if a crack can be repaired for coating or if the section of the wall should be rebuilt?


Under what conditions should small-diameter blisters (less than 1.5 inches) in a water tank lining be repaired/repainted? Should the blisters be broken and the substrate examined?


What is the special requirement for tank internal curing?


How does rapid depressurization affect lining performance in vessels and line pipe, and how can you identify any failure that might result?


How do you remove all traces of an uncured internal coating from a tank when abrasive blasting is not an option?


Is grinding the only way to remove large areas of a silicone coating from a ship's hull to replace the silicone with an epoxy mastic?


I have several water tanks constructed with carbon steel for demineralized water storage. The tanks are about 20 years old, and the original coating has started to blister. For refurbishment of the coating, what material should be used and at what dry film thickness? The original type of coating is unknown.


How do you use smartphone apps on the job? What tasks or needs does your phone or tablet help with during the course of a day?


What kinds and sources of data are available to support the use of antimicrobial agents in coatings for hospital substrates?


What environmental and safety precautions need to be taken when removing lead-based paint from the brick on a commercial building adjacent to the sidewalk in a dense urban business district when the removal method is chemical stripping followed by water blasting?


What confined-space rescue protocol (internal, third party, etc.) have you developed, and why did you choose this plan?


How do you properly coat welded joints?


What environmental and safety precautions need to be taken when removing lead-based paint from the brick on a commercial building adjacent to the sidewalk in a dense urban business district when the removal method is chemical stripping followed by water blasting?


What health and safety precautions should contractors take when applying isocyanate-cured epoxies in the field?


What kind of training and credentials are needed in the U.S. for industrial painters who work near live wires?


Under what circumstances is third-party inspection justified on commercial coating work?


What causes static electricity during abrasive blasting? What risk does it pose, and how can it be controlled?


What confined-space rescue protocol (internal, third party, etc.) have you developed, and why did you choose this plan?


Do you need to wait for the mortar to cure before repainting a brick surface after repointing and power-tool cleaning? If so, how long, and how do you judge when it is safe?


What kind of training and credentials are needed in the U.S. for industrial painters who work near live wires?


When planning containment for blasting, what are the most important factors to consider?


How do you determine whether a lead-bearing coating can be overcoated or removed and replaced?


What is the best way to achieve proper surface preparation in areas with limited access, such as interior box beams on bridges?


What health and safety precautions should contractors take when applying isocyanate-cured epoxies in the field?


What confined-space rescue protocol (internal, third party, etc.) have you developed, and why did you choose this plan?


I understand that the EPA is reluctant to allow the use of nanoparticles in coatings, due to their tendency to persist in the environment. What is the real risk, and how can the nanocoating industry address it?


Where can I find industry standards for air quality during spray painting operations, specifically regarding moisture, oil and particulates?


How should surface preparation be conducted in non-sparking atmospheres?


What environmental and safety precautions must be taken when using chemical stripping and water blasting to remove lead-based paint from a commercial building exterior in an urban business district?


What kind of training and credentials are needed in the U.S. for industrial painters who work near live wires?


What health and safety precautions do contractors have to take when applying isocyanate-cured epoxies in the field?


 
 
   

**Commercial white papers, product videos, and other sponsored documents posted on this site are paid content from third-party companies; inclusion and posting on this site does not imply an endorsement nor recommendation of the content by Technology Publishing/PaintSquare. By signing in and viewing or downloading this paid content, you agree to make your name and full contact information available to the sponsor of the content.

Advertisements
 
base painters

 
Paint BidTracker

 
Tarps manufacturing, Inc.

 
NLB Corporation

 
Modern Safety Techniques

 
Key Resin Company

 
Polyset

 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@paintsquare.com


The Technology Publishing Network

PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy Policy   |   Terms & Conditions   |   Support   |   Site Map   |   Search   |   Contact Us