from JPCL, October 2019
|
|
from PaintSquare Press, Fall 2019 ; by Troy Fraebel, ABKaelin, LLC
|
|
from PaintSquare Press, Fall 2019 ; by Don J. Schnell, Polygon US
|
|
from JPCL, August 2019
|
|
from JPCL, May 2019 ; by Vaughn O’Dea, Tnemec Company, Inc.
Concrete that has been distressed from chemically induced deterioration should be pro...
|
|
from JPCL, April 2019
|
|
from JPCL, April 2019 ; by Jay Kunick, Fischer Technology, Inc.
Thermally sprayed aluminium (TSA) coatings can offer long-term corrosion protection f...
|
|
from JPCL, April 2019 ; by David A. Hunter, PCS, Pond & Company, Inc.
In nuclear facilities, the term “safety-related” applies to systems, structures, comp...
|
|
from JPCL, March 2019
|
|
from JPCL, March 2019 ; by Peter Bock, Performance Polymers Americas LLC
Traditional methods of in-service inspection of CUI coating systems are extremely exp...
|
|
from JPCL, February 2019
|
|
from JPCL, January 2019 ; by Cory Allen, Vulcan Painters, Inc.
|
|
from JPCL, September 2018
|
|
from JPCL, September 2018 ; by David J. Barnes, Elcometer Ltd.
|
|
from JPCL, September 2018 ; by Hassan Al-Sagour and Mana Al-Mansour, Saudi Aramco
In the article, “Qualification Tests for High-Temperature FBE Coatings” in the July 2...
|
|
from JPCL, August 2018
|
|
from JPCL, August 2018 ; by Troy Fraebel, ABKaelin, LLC
|
|
from JPCL, August 2018 ; by Dr. Mike O’Donoghue; Vijay Datta, MS; Ravi Nagarajan; Bill Dempster; Robin Wade, MA; and Sherman Spear, International Paint LLC
This article explores the footprint and characteristics of a novel and solvent-free, ...
|
|
from JPCL, August 2018 ; by Ian Daniel and Mark Stone, Sonomatic Ltd
As steps have been taken to minimize work in confined spaces by exploring zero-man en...
|
|
from JPCL, July 2018 ; by Jamie Branch, Apellix
Aerial robotic technology offers a novel approach to obtaining coating inspection dat...
|
|
from JPCL, June 2018 ; by Troy Fraebel, ABKaelin, LLC
Time and Temperature: Don't Forget About Humidity
|
|
from JPCL, May 2018 ; by Jody Wenzel, DeFelsko Corporation
Power-Tool-Cleaned Surfaces: New Insights
into Surface Profile Measurement
|
|
from JPCL, April 2018
|
|
from JPCL, April 2018
|
|
from JPCL, February 2018 ; by Tim Bauman, The Sherwin-Williams Company
The author describes three case scenarios where enlisting an independent, third-party...
|
|
from JPCL, January 2018
Introducing Two New Training Courses at SSPC 2018
|
|
from JPCL, January 2018 ; by Bobby Meade, Greenman Pedersen, Inc.; Derrick Castle, The Sherwin-Williams Company; and Theodore Hopwood II and Sudhir Palle, University Of Kentucky
Steel reinforced concrete bridge components are deteriorating prematurely, especially...
|
|
from JPCL, December 2017 ; by Troy Fraebel, ABKaelin, LLC
Inspection of Field-Applied, Thin-Film Intumescent Paint
|
|
from D+D In Depth, November 2017 ; by KENNETH A. TRIMBER, KTA-TATOR, INC.
The SSPC Commercial Coatings Committee addresses the need for more standards and guid...
|
|
from D+D Print, Fall 2017 ; by Kenneth A. Trimber, KTA-Tator Inc.
Is there a way to prove the paint on your building has faded and become dull, and if ...
|
|
from JPCL, October 2017
Two New SSPC Training Courses Offered at SSPC 2018
|
|
from D+D Print, Summer 2017 ; by Kenneth A. Trimber, KTA-Tator Inc.
What should contractors do before starting work to reduce the possibility that existi...
|
|
from D+D In Depth, August 2017 ; by AMY WOODALL, DURABILITY + DESIGN
In September, Durability + Design is devoting a full day to helping owners, architect...
|
|
from JPCL, August 2017
PaintSquare Comments, Top 10 News, Poll
|
|
from D+D In Depth, July 2017 ; by KURT WOOD, ARKEMA INC.
Although many topcoat standards for architectural and protective coating applications...
|
|
from JPCL, June 2017 ; by Jim Molnar, UTLX
As long as railroad tank car interiors have been lined to preclude interaction of the...
|
|
from JPCL, June 2017
The JPCL Equipment Buying Guide lists products, equipment and supplies for protective...
|
|
from D+D In Depth, May 2017 ; by AMY WOODALL, EDITOR, D+D IN DEPTH
Get a sneak peek of the curriculum for D+D’s upcoming Material Selection Conference. ...
|
|
from D+D In Depth, June 2017 ; by HAROLD HOWER, D+D IN DEPTH
Conference panelists are usually prohibited from sharing specific coating names and p...
|
|
from D+D In Depth, April 2017 ; by AMY WOODALL, EDITOR, D+D IN DEPTH
Durability + Design’s inaugural Materials Selection Conference focuses on helping own...
|
|
from D+D Print, Spring 2017 ; by Stanley Yee, Leed AP, Dow Corning Corporation
Get to know the available material options and how the materials will perform togethe...
|
|
from D+D Print, Spring 2017 ; by Amy Woodall, Editor
Moisture intrusion is one of the biggest painting contractor concerns, and it’s impor...
|
|
from D+D Print, Spring 2017 ; by Kenneth A. Trimber, KTA-Tator, Inc.
Get answers to questions regarding surface preparation, application and final thickne...
|
|
from D+D Print, Spring 2017 ; by Zenith F. Czora, Crommelin
When it comes to concrete block, the successful coatings application often requires k...
|
|
from JPCL, March 2017 ; by Peter Bock, Chicago Corrosion Group
|
|
from D+D In Depth, March 2017 ; by REBEKAH WILSON, PH.D.; BROOKE DIVAN, M.SC.; AND KATHRYN GUY, PH.D., U.S. ARMY CORPS OF ENGINEERS
Can the application of exterior coatings be a simple and inexpensive way to reduce he...
|
|
from D+D In Depth, March 2017 ; by STEVEN HEINJE, GAF
From cleaning to working with factory finishes, there are a number of issues to be aw...
|
|
from D+D Print, Winter 2017
“We’re seeing an increased awareness of the importance of paint and water repellent o...
|
|
from D+D In Depth, January 2017 ; by Kevin Brown, Harold DeCelle, and Kenneth A. Trimber, KTA-Tator Inc.
The number of times a building can be repainted before permeance becomes a problem li...
|
|
from D+D In Depth, January 2017 ; by Joe Schmit, Tnemec Company Inc.
It is important to understand what happens below the concrete surface when a resinous...
|
|
from JPCL, December 2016
|
|
from JPCL, November 2016 ; by Dr. Yasir Idlibi, MICHAL Consulting; Jason Hartt, ADANAC Global Testing & Inspection; Dr. Mike O’Donoghue and Vijay Datta, MS, International Paint LLC; and Bill Johnson, AScT, Acuren Group Inc.
Is there such a thing as “blind chance”? Enter the realm of cause and effect and lini...
|
|
from D+D In Depth, November 2016 ; by Steven Reinstadtler, Covestro LLC
An attractive, durable concrete floor coating requires methodical preparation before ...
|
|
from JPCL, October 2016
Can water be sprayed onto an IOZ-coated surface that has not fully cured due to low-h...
|
|
from D+D In Depth, October 2016 ; by Kirk R. Shields, Corrosion Probe Inc.
Painted aluminum exterior units are rapidly failing in South Florida — sometimes even...
|
|
from JPCL, September 2016 ; by Don J. Schnell, Polygon US
|
|
from D+D In Depth, September 2016 ; by Gabriel Morales-Sada, AkzoNobel
Choosing the correct coating system for aluminum or galvanized steel substrates depen...
|
|
from JPCL, August 2016 ; by Alison B. Kaelin, CQA, ABKaelin, LLC
|
|
from JPCL, August 2016
|
|
from JPCL, August 2016 ; by Brian O’Farrell, DP Coatings Ltd.
There are many ways moisture can affect concrete floor coatings but moisture testing ...
|
|
from JPCL, August 2016
How should a contractor respond when he/she reads a specification requirement that “t...
|
|
from JPCL, July 2016 ; by David Beamish, DeFelsko Corporation
|
|
from JPCL, July 2016
|
|
from JPCL, July 2016 ; by Patrick Cassidy, Elzly Technology Corporation and Paul Slebodnick, James Tagert and James Martin, U.S. Naval Research Lab
This article describes a study of the effect of profile type, profile height, the ext...
|
|
from JPCL, June 2016
|
|
from JPCL, April 2016 ; by Richard A. Burgess, PCS, Series Editor, KTA-Tator, Inc.
|
|
from JPCL, April 2016 ; by R. A. Nixon, Corrosion Probe, Inc. / Corrosion Testing Laboratories, Inc.
|
|
from JPCL, April 2016
|
|
from JPCL, March 2016 ; by Warren Brand, Chicago Corrosion Group, LLC
|
|
from JPCL, February 2016 ; by Alison B. Kaelin, CQA, ABKaelin, LLC
|
|
from JPCL, February 2016
|
|
from JPCL, February 2016 ; by Robert Kogler and Laura Erickson, Rampart LLC
The authors describe ongoing work being conducted with the Center for Corrosion Scien...
|
|
from JPCL, January 2016 ; by Vaughn O’Dea, Cory Brown and Anthony Dallen, Tnemec Company, Inc.
The authors present the common pull-off adhesion test methods used for concrete subst...
|
|
from JPCL, January 2016
|
|
from JPCL, October 2015
How long can a blasted surface be left before priming under different temperatures/re...
|
|
from D+D Online Features, September 2015 ; by Don Schnell, Polygon US Corporation
Residual moisture in concrete slabs has become an increasing problem in recent years,...
|
|
from JPCL, Coatings Professionals: The Next Generation 2015 Special Issue
|
|
from JPCL, Coatings Professionals: The Next Generation 2015 Special Issue
|
|
from JPCL, Coatings Professionals: The Next Generation 2015 Special Issue
|
|
from JPCL, July 2015
When and why would I need to stripe coat if I'm using an edge-retention primer?
|
|
from JPCL, July 2015 ; by Robert Ikenberry, California Engineering Contractors, Inc., and Don Schnell, Polygon
The authors discuss the impact of humidity on surface preparation, coating applicatio...
|
|
from JPCL, July 2015 ; by David Beamish, DeFelsko Corporation
A surface profile is composed of a complex pattern of peaks and valleys. This article...
|
|
from JPCL, July 2015 ; by Nuno Cipriano, Ultrablast Lassarat Ltd., Brazil
This article describes how these combined technologies in newbuilding projects can pr...
|
|
from JPCL, July 2015 ; by Dwight G. Weldon, Weldon Laboratories, Inc.
|
|
from JPCL, May 2015 ; by Rob Francis, R A Francis Consulting Services Pty Ltd
Part 1 of this column on surface preparation standards, published in the February 201...
|
|
from JPCL, April 2015
Top of the News
|
|
from D+D Print, April 2015
Readers advise on moisture concerns when painting concrete walls with acrylics.
|
|
from D+D Print, April 2015 ; by Dave Lick, Paint Quality Assurance Inspector
Understand the factors that go into ensuring a successful steel coating job.
|
|
from D+D Print, February 2015
Readers share advice on judging substrate characteristics prior to coating applicatio...
|
|
from D+D Print, January 2015 ; by Joe Reardon, SASE
When concrete needs profiling, these machines get it done.
|
|
from D+D Print, January 2015 ; by Kenneth A. Trimber, KTA-Tator Inc.
Part 2: Moisture Detection
|
|
from JPCL, December 2014
A specification for a bridge to be built of
high-performance weathering steel requir...
|
|
from D+D Print, December 2014
Durability + Design's Tools + Equipment Buying Guide for 2015 offers this comprehensi...
|
|
from D+D Print, December 2014 ; by Kenneth A. Trimber, KTA-Tator Inc.
Eliminate guesswork from coatings prep and application.
|
|
from D+D Print, November 2014 ; by Kevin Brown and Danny Jones, KTA-Tator Inc.
No time for standard concrete slab moisture evaluations? Try these accelerated method...
|
|
from D+D Print, November 2014 ; by Frank Lewis, SUNDEK Decorative Concrete Products
For decorative concrete overlays that perform, avoid these ‘wrong turns.’
|
|
from D+D Print, November 2014 ; by Kevin Sigourney, PROSOCO
Here’s what you need to know if you want
your polished concrete floor to keep its sh...
|
|
from D+D Print, November 2014 ; by Dave Lick, Paint Quality Assurance Inspector
Why was a six-month-old ceiling coating dripping on cars?
|
|
from D+D Print, September 2014 ; by Fred Goodwin, BASF Construction Chemicals
What you don’t know about moisture-testing concrete floors can cost you.
|
|
from JPCL, The Facility Owner's Perspective 2014 Special Issue; by Dan Mobbs, Assistant Editor, JPCL Europe
Assistant editor of JPCL Europe, Dan Mobbs interviewed engineering manager Andy Smith...
|
|
from JPCL, July 2014
|
|
from JPCL, July 2014 ; by Peter Bock, CorrLine International, LLC
Visual surface preparation standards are subject to individual interpretation by owne...
|
|
from D+D Print, May 2014 ; by Don Schnell, DRYCO
When the concrete is too wet for flooring, your best bet - natural drying, dehumidifi...
|
|
from JPCL, February 2014 ; by Chrissy Stewart, PCS, KTA-Tator, Inc., Rich Burgess, KTA-Tator, Inc., Series Editor
|
|
from JPCL, February 2014 ; by Kristin Leonard, Bechtel Corp.
This article evaluates the performance of a polyurea “loose” lining system for repair...
|
|
from JPCL, January 2014
|
|
from D+D Print, December 2013 ; by Harold Hower
Six industry leaders offer their views on the state of architectural coatings, from h...
|
|
from JPCL, October 2013 ; by Charles Lange, JPCL
|
|
from JPCL, September 2013
|
|
from JPCL, Three Decades of Change in the Coatings Industry 2013 Special Issue; by Warren Brand, Chicago Coatings Group, LLC
|
|
from JPCL, Three Decades of Change in the Coatings Industry 2013 Special Issue; by Charles Lange and Brian Goldie, JPCL
|
|
from JPCL, Three Decades of Change in the Coatings Industry 2013 Special Issue; by The JPCL Staff
|
|
from JPCL, Three Decades of Change in the Coatings Industry 2013 Special Issue; by The JPCL Staff
|
|
from JPCL, August 2013 ; by Peter Bock, Capital Inspectors
This article describes using risk-based inspection (RBI) to detect and mitigate corro...
|
|
from JPCL, August 2013 ; by David Hunter, Mascoat, and Kevin Turpin, PK Technology
|
|
from JPCL, July 2013 ; by Charles Lange, JPCL
|
|
from JPCL, July 2013
|
|
from JPCL, June 2013
This year’s Equipment Buying Guide lists products, equipment, and supplies for protec...
|
|
from JPCL, May 2013 ; by Anita Socci, JPCL
|
|
from JPCL, May 2013 ; by Robert Barnhart, Debbie Mericle, Chuck Mobley, Tom Hocking, Jeff Bogran, and Ernestine McDaniel
|
|
from JPCL, April 2013 ; by William D. Corbett, PCS, KTA-Tator, Inc.
This article gives a brief review of the history of SSPC-PA 2 and describes the five ...
|
|
from D+D Online Features, D+D February 2013 2013 ; by Kevin J. Brown and Kenneth A. Trimber
When the paint on the exterior of a building exhibits heavy fading, chalking, or peel...
|
|
from D+D Online Features, D+D February 2013 2013 ; by Tom Stuewe
Preventive maintenance (PM) that makes a good roof better is far more cost-effective ...
|
|
from JPCL, December 2012 ; by Kenneth A. Trimber, KTA-Tator, Inc.
The author raises questions about practical improvements in inspection and quality ov...
|
|
from JPCL, December 2012 ; by Aimée Beggs and Heather Stiner, SSPC: The Society for Protective Coatings
The authors report on a new standard, SSPC-PA 17, on steel profile and its complement...
|
|
from JPCL, November 2012 ; by Don Schnell, DRYCO
A quality coatings application can occur only when optimum environmental conditions a...
|
|
from JPCL, November 2012 ; by Richard Burgess, Series Editor, KTA-Tator, Inc.
|
|
from JPCL, November 2012 ; by Brendan Fitzsimons, Pyeroy
Does the ideal coating inspector really exist? The author reviews the various qualifi...
|
|
from JPCL, September 2012 ; by Dudley J. Primeaux II, PCS, CCI, Primeaux Associates LLC
This article discusses developments in polyurea technology as well as the importance ...
|
|
from JPCL, August 2012
Webinars address plural component and pipeline issues
|
|
from JPCL, July 2012 ; by David Beamish, DeFelsko Corporation
|
|
from D+D Online Features, July 2012 ; by David Beamish
Coated concrete is a commonly used building material, and arguably can be the most li...
|
|
from JPCL, June 2012
How long can a blasted surface be left before priming under different temperatures/ r...
|
|
from JPCL, May 2012 ; by William H. Hansel, Caltrans
This article describes the painting of the Vincent Thomas Bridge's east tower, highli...
|
|
from JPCL, January 2012 ; by Fred Goodwin, BASF Corp., Construction Chemicals
In this inaugural article of JPCL's 2012 Top Thinkers: The Clive Hare Honors series, ...
|
|
from JPCL, January 2012
What is the service life of a painted weathering steel bridge, compared to a painted ...
|
|
from JPCL, January 2012 ; by Eric S. Kline, KTA-Tator, Inc., Richard A. Burgess, Series Technical Editor
|
|
from JPCL, December 2011 ; by Jodi Temyer
Q&A with Skip Vernon
|
|
from D+D Online Features, December 2011 ; by Kenneth A. Trimber
Water is good for taking a swim, floating a boat, boiling an egg, or washing the car.
|
|
from JPCL, November 2011 ; by Benjamin Fultz, Bechtel Corporation; William D. Corbett, KTA-Tator, Inc.; and Kurt Best, Bayer MaterialScience
This article reports on a study that compared the handling of three generic types of ...
|
|
from JPCL, September 2011
This Month's Question: What is the remedial action
if a blaster produces too high a ...
|
|
from D+D Online Features, August 2011 ; by Kenneth A. Trimber
The paint systems used on buildings are selected from published performance data, man...
|
|
from JPCL, May 2011 ; by Philippe Le Calvé, DCNS, France; Jean-Pierre Pautasso, Direction Générale de I’Armement, France; and Nathalie Le Bozec, French Corrosion Institute
The authors report on the first part of a study on the use of UHP waterjetting for se...
|
|
from JPCL, May 2011
|
|
from JPCL, May 2011
|
|
from JPCL, May 2011 ; by William D. Corbett, KTA-Tator, Inc.
This article reviews the purpose and benefits of developing an inspection plan and re...
|
|
from JPCL, April 2011 ; by Mike O’Donoghue, Ph.D.; V.J. Datta, MS; and Russell Spotten, International Paint, LLC
The authors examine the "angels and demons" that coatings with exempt solvents pose f...
|
|
from JPCL, April 2011
|
|
from JPCL, April 2011
|
|
from PWC, November/December 2010 ; by Rick Huntley
|
|
from PWC, November/December 2010 ; by Kenneth A. Trimber
Don't let conditions rain on your painting parade.
Get a sneak peek at Durability ...
|
|
from PWC, September/October 2010 ; by Sally Zimmerman
Knowing a home's vintage will give you an advantage.
|
|
from JPCL, August 2010 ; by Fernando Lehrer, ABS Product Development, Nautical Systems
The author discusses the American Bureau of Shipping's
software-based Hull Inspectio...
|
|
from JPCL, August 2010 ; by JPCL staff
Based on information provided to JPCL about products introduced between June 2009 and...
|
|
from JPCL, July 2010 ; by Curt Hickcox, Public Utilities Maintenance, Inc.
The author discusses the history of North America's
electric grid and the significan...
|
|
from JPCL, June 2010 ; by Martin Earlam, UK Environment Agency
Ship collision gives water jetting roles in environmental protection, Barrier coating...
|
|
from JPCL, June 2010
|
|
from JPCL, June 2010 ; by Susan Drozdz, U.S. Army Engineer Research and Development Center, with contributions from Mike Hasbrook, Washington Industrial Coatings
In this photo essay, the authors depict the maintenance painting of a 200,000-gallon ...
|
|
from JPCL, May 2010
|
|
from JPCL, May 2010 ; by Ernst Toussaint, EIT; Ross Sherwood, EIT, Tennessee Department of Transportation; and Scott Stotlemeyer, PE, Missouri Department of Transportation
The authors discuss the unique requirements of the calcium sulfonate system used on t...
|
|
from JPCL, February 2010
|
|
from JPCL, January 2010 ; by Lydia M. Frenzel, Ph.D., Advisory Council
This article describes the history of waterjet cleaning, discusses the effect that pr...
|
|
from PWC, January/February 2010 ; by Rick Huntley
Taking a few measurements during the job can head off a massive failure later.
|
|
from JPCL, January 2010
Lloyd's approves SSPC Inspector Program; JPCL, SSPC to offer webinars
|
|
from JPCL, January 2010 ; by Casey Ball, The Sherwin-Williams Company
|
|
from JPCL, December 2009 ; by Rob Francis, Aurecon Australia Pty Ltd
The author provides a close look at four major international standards for measuring ...
|
|
from JPCL, November 2009
Many SSPC and ISO standards can be used in the laboratory to check the quality of abr...
|
|
from JAC, October/November 2009
From technical functions to design services, from project management to spec writing,...
|
|
from JPCL, September 2009
|
|
from JPCL, September 2009 ; by Heather Bayne, SSPC
This article reviews aggressive exporsures within wastewater facilities; degradation ...
|
|
from JPCL, August 2009 ; by Harold Hower, Technology Publishing/PaintSquare
The past 25 years will likely be seen as the Golden Age of information technology, wh...
|
|
from JPCL, June 2009
|
|
from JPCL, May 2009 ; by Fred Goodwin, Fellow Scientist, BASF Construction Chemicals
Key questions to ask about the surface preparation of concrete are covered in this ar...
|
|
from JPCL, May 2009 ; by Kevin Morris, Market Development Director, Water and Wastewater, The Sherwin-Williams Company
Editor's Note: This article is a condensed version of a paper the author presented at...
|
|
from JPCL, May 2009
|
|
from JPCL, March 2009 ; by Dudley J. Primeaux II, Primeaux Associates LLC, Elgin, TX and Kelin Bower, PolyVers Internatioanl, Houston, TX
In any coating or lining work, obtaining the specified minimum film thickness or the ...
|
|
from JPCL, March 2009
What are the causes of surface profile exceeding specified ranges, and how can surfac...
|
|
from JPCL, March 2009
|
|
from JPCL, May 2008 ; by Technology Publishing
This years' Equipment Buying Guide lists products, equipment, and suppliers for prote...
|
|
from JAC, January/February 2008 ; by Charles H. Holl, Dayton Superior Corp.
Important preparation and test-method procedures are reviewed in the second part of t...
|
|
from JAC, October/November 2007 ; by Charles H. Holl, Technical Specialist, Dayton Superior Corp.
The author provides a practical overview of the more commmonly used cleaning, surface...
|
|
from JAC, October/November 2007 ; by Jayson L. Helsel, P.E.
Although the performance and durability of a coating clearly rank at the top of any l...
|
|
from JAC, January/February 2007 ; by Jayson L. Helsel, PE., KTA-Tator, Inc.
A horizontal concrete surface may convey the appearance of a relatively monolithic, s...
|
|
from JAC, August/September 2006 ; by Charles Holl, Dayton Superior Speciatly Chemicals
Moisture vapor and hydrostatic pressure can wreak havoc with protective and decorativ...
|
|
from JAC, Feburary/March 2006 ; by Allen Zielnik, Atlas Materials Testing Technology LLC
Color, gloss measurements add science to the art of selecting coatings that will hold...
|
|
from JAC, April 2005 ; by Kevin Knight
Selection of material, application, and quality control procedures are described for ...
|
|