issued by NACE
This standard describes requirements and guidelines for ways of organizing and maintaining the ...
|
|
issued by SSPC
This new standard establishes minimum performance standards for coatings used over concrete in ...
|
|
issued by ASTM
Personnel trained for coating work inspection are required to perform examination/inspection ta...
|
|
issued by ASTM
This specification defines the size composition and surface preparation requirements for the pr...
|
|
issued by NACE
New in 2009. Presents various techniques for aboveground evaluation of the coating condition of...
|
|
issued by NACE
REVISED IN 2010! Covers the NACE external corrosion direct assessment (ECDA) process—a process ...
|
|
issued by NACE
This standard practice covers the NACE external corrosion confirmatory direct assessment (ECCDA...
|
|
issued by NACE
Presents guidelines to ensure the proper selection, application, and performance of bonded tape...
|
|
issued by NACE
Formalizes the process of internal corrosion direct assessment (ICDA) for pipelines carrying na...
|
|
issued by ASTM
Damage to pipe coating is almost unavoidable during transportation and construction. Breaks or ...
|
|
issued by ASTM
This test will provide information on the ability of coatings applied to pipe to resist crackin...
|
|
issued by ASTM
The data obtained for short-term tests are of interest only in eliminating the most unsuitable ...
|
|
issued by ASTM
Solvents in a traffic paint may cause bleeding of pavement constituents into the traffic markin...
|
|
issued by ASTM
This practice is designed to evaluate the resistance to wear of a traffic paint. It must be rem...
|
|
issued by ASTM
The drying rate of organic coatings varies with changes in temperature, air flow, and relative ...
|
|
issued by ASTM
This specification covers the design and fabrication of metal components for flue gas desulfuri...
|
|
issued by ASTM
This test method is designed to provide a uniform test to assess the suitability of coatings, u...
|
|
issued by ASTM
The lining test described in 6.2 may be used to evaluate the chemical resistance characteristic...
|
|
issued by ASTM
After waterborne traffic paints are applied to a road pavement, it is important that they be su...
|
|
issued by ASTM
This guide is a listing of relevant publications, standards, and other information related to c...
|
|
issued by ASTM
1.1 This guide provides a common basis on which protective coatings for the surfaces of nuclear...
|
|
issued by ASTM
1.1 This terminology covers terms and their definitions relevant to the use of protective coati...
|
|