Problem Solving Forum (19)


Can a cross-cut adhesion test be carried out on IOZ coatings?


How do you adequately assess the adhesion of a newly applied coating?


I need to embed a metallized culvert liner on concrete. I've been told I have to paint it to avoid adhesion problems between the metal liner and the concrete. Is this true and, if so, what type of coating is best?


In reviewing the testing data for adhesion, some manufacturers indicate ASTM D4541 results while others show ASTM C3359 results. Is it possible to compare one against the other? For example, does 1037 psi provide better adhesion than 4A?


Why would a pull-off adhesion test give a high value (no failure) for a solventless epoxy that later showed poor adhesion in service?


How do you adequately assess the adhesion of a newly applied coating?


Should pull-off adhesion tests be carried out on a zinc-rich primer alone, or only on a complete system?


How do concrete admixtures such as hardeners and anti-dust compounds affect coating adhesion? What can be done to minimize negative effects?


In reviewing the testing data for adhesion, some manufacturers indicate ASTM D4541 results while others show ASTM C3359 results. Is it possible to compare one against the other? For example, does 1037 psi provide better adhesion than 4A?


Why would a pull-off adhesion test give a high value (no failure) for a solventless epoxy that later showed poor adhesion in service?


How do you accurately measure the adhesion of inorganic zinc?


How do you adequately assess the adhesion of a newly applied coating?


How do you adequately assess the adhesion of a newly applied coating?


How do concrete admixtures such as hardeners and anti-dust compounds affect coating adhesion? What can be done to minimize negative effects?


Why would a pull-off adhesion test give a high value (no failure) for a solventless epoxy that later showed poor adhesion in service?


When should the adhesion of an applied coating or lining multi-coat system be tested?


How do you adequately assess the adhesion of a newly applied coating?


What steps must be taken to mitigate poor adhesion over an existing aged silver aluminum paint? What primer will achieve good adhesion?


How do admixtures to concrete (hardeners, anti-dust compounds, etc.) affect coating adhesion? What can be done to eliminate or minimize negative effects?


 
 
   

**Commercial white papers, product videos, and other sponsored documents posted on this site are paid content from third-party companies; inclusion and posting on this site does not imply an endorsement nor recommendation of the content by Technology Publishing/PaintSquare. By signing in and viewing or downloading this paid content, you agree to make your name and full contact information available to the sponsor of the content.

Advertisements
 
Axxiom Manufacturing

 
KTA-Tator, Inc. - Corporate Office

 
EDCO - Equipment Development Co. Inc.

 
Strand’s Industrial Coatings

 
CRW

 
Sauereisen, Inc.

 
Tarps manufacturing, Inc.

 
HoldTight Solutions Inc.

 
Abrasives Inc.

 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@paintsquare.com


The Technology Publishing Network

PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy Policy   |   Terms & Conditions   |   Support   |   Site Map   |   Search   |   Contact Us