Daily Quiz (45)


What organization has published a classification system for textures of floor coating finish coats and a set of tactile comparators?


According to a PaintSquare writer, the floor coating material of choice for the food and beverage industry is which of the following?


True or false: The slipperiness of a wood floor finish is influenced most by the generic type of the finish material and its film formation.


True or false: PDA has the Polymeric Floor Coatings Advisory Committee.


SSPC has a procedure to certify that contractors can successfully install floor coatings on what type of substrate?


True or false: According to a concrete coating specialist in a JPCL article, failure of flooring materials is usually due to a combination of factors rather than a single, simple cause that led to below-expectation performance.


Sealers and thin-film floor coatings typically require a profile in what CSP range, according to a recent Durability + Design In Depth article?


True or false: Mother of pearl is sometimes used as a decorative aggregate in polymer terrazzo floor coatings.


What organization publishes the Guide for Concrete Slabs that Receive Moisture-Sensitive Flooring Materials?


True or false: Methyl methacrylate (MMA) resinous flooring systems do not cure at low temperatures.


In what discipline is the term “maximum refinement” used?


True or false: Vinyl ester and methyl methacrylate floor coatings are typically used in light-duty exposure service.


True or false: According to a D+D article, you can drive on a polyurea-coated floor or use a coated product within 12 hours of application.


True or false: SSPC has a procedure to certify that contractors can successfully install floor coatings.


True or false: According to a D+D article, the industry’s rule of thumb is that it takes one month per inch of a concrete slab’s thickness before non-breathable flooring can be applied.


True or false: Methyl methacrylate resinous flooring systems should not be applied at temperatures below 40 degrees Fahrenheit.


What is one difference between polished concrete and terrazzo?


The slip resistance of wood-floor finishes is influenced most by what characteristic?


What organization publishes grade standards, guide specifications, floor care recommendations and specifications for athletic wood flooring sealers and finishes?


Which of the following machines would be used to measure the coefficient of friction of a polished concrete floor?


What is the name of a machine used to measure the coefficient of friction of polish-coated floors?


True or false: According to a recent D+D In Depth article, sealers and thin-film floor coatings typically require a profile in the CSP 3-5 range.


True or false: Linseed oil built up in multiple coats on a wood floor is likely to be very glossy but not very slippery.


True or false: Vinyl ester floor coatings are ineffective at resisting harsh chemical exposures.


True or false: SSPC is developing a quantitative coatings texture guide as an aid in specifying flooring systems that will improve traction on floors expected to be wet or covered with contaminants.


What organization has the Polymeric Floor Coatings Advisory Committee?


True or false: Methyl methacrylate (MMA) resinous flooring systems should not be applied at temperatures below 40 degrees F.


According to a recent D+D article, what generic type of floor coating can be installed at extremely low temperatures?


What recent development in construction makes it desirable for floor coatings to have UV resistance?


True or false: Methyl methacrylate resins are sometimes used to formulate floor coatings.


True or false: UV floor-curing units can polymerize and cure a single-component, UV-curable polyurethane coating in fractions of a second.


True or false: A recent Durability + Design article noted that epoxy floor coatings can be made more durable in high traffic areas if topcoated with polyurethane.


In what exposure conditions would you be most likely to specify an epoxy novolac floor coating?


What organization maintains an approved product list for sealers and finishes used on athletic wood floors?


What recent development in construction makes it important for floor coatings to have UV resistance?


True or false: Linseed oil built up in multiple coats on a wood floor is likely to be very glossy and very slippery.


True or false: An industrial floor coating containing 50 percent bio-based material was recently introduced.


Is it possible for a wood floor coating to be very glossy but not slippery?


What organization has developed specifications, tests, and an approved supplier and products list for finishes used on athletic wood floors?


What recent development in construction makes UV resistance of interior floor coatings desirable?


True or false: Some waterborne floor coatings are cured by UV light.


Slip resistance of wood-floor finishes are influenced most by what characteristic?


True or false: On a maple, high performance athletic floor, gloss levels of the coating must be controlled to control slipperiness.


Commonly specified concrete floor coatings include all but which of the following choices?


It is considered important for a concrete floor coating to be "breathable." What does this mean?


 
 
   

**Commercial white papers, product videos, and other sponsored documents posted on this site are paid content from third-party companies; inclusion and posting on this site does not imply an endorsement nor recommendation of the content by Technology Publishing/PaintSquare. By signing in and viewing or downloading this paid content, you agree to make your name and full contact information available to the sponsor of the content.

Advertisements
 
Sauereisen, Inc.

 
Modern Safety Techniques

 
KTA-Tator, Inc. - Corporate Office

 
SAFE Systems, Inc.

 
Tarps manufacturing, Inc.

 
HoldTight Solutions Inc.

 
Mitsubishi Gas Chemical America

 
ABKaelin, LLC

 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@paintsquare.com


The Technology Publishing Network

PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy Policy   |   Terms & Conditions   |   Support   |   Site Map   |   Search   |   Contact Us