from JPCL, November 2019 ; by Colton Spicer, Cameron Miller, Jimmy Tagert and John Wegand, Naval Research Laboratory; and Dr. Erick Alley, Naval Surface Warfare Center
Military performance specification, MIL-PRF-24667, governs the vetting and qualificat...
|
|
from JPCL, November 2019
|
|
from JPCL, November 2019 ; by Dr. Mike O’Donoghue and Vijay Datta, MS, International Paint LLC
Twenty-five years ago, an icebreaker coating primarily designed for the underwater hu...
|
|
from JPCL, November 2019
|
|
from JPCL, October 2019 ; by Timothy Wedow, Master-Lee Energy Services Corp.
Why would anyone want a coating system to detach from the surface? This article descr...
|
|
from JPCL, September 2019 ; by Mike Manetta, Sherwin-Williams Protective & Marine Coatings
Although the freight-rail business is potentially very profitable, about 40 cents of ...
|
|
from PaintSquare Press, Fall 2019 ; by Brian Goldie, Technology Publishing Company
|
|
from JPCL, August 2019
|
|
from JPCL, August 2019 ; by Raymond S. Tombaugh, KTA-Tator, Inc.
The installation of linings in large-diameter cooling pipes and penstocks is a major ...
|
|
from JPCL, April 2019 ; by David A. Hunter, PCS, Pond & Company, Inc.
In nuclear facilities, the term “safety-related” applies to systems, structures, comp...
|
|
from JPCL, March 2019 ; by Dr. Jeffrey David Rogozinski, Sherwin-Williams Protective & Marine Coatings
Buried transmission pipelines face a constant safety threat from corrosion. Pipeline ...
|
|
from JPCL, March 2019 ; by Mike O’Donoghue, Ph.D. and Vijay Datta, MS, International Paint LLC; and Margaret Pardy, Mag Consulting Inc.
This article discusses performance and productivity issues associated with a tandem a...
|
|
from JPCL, February 2019 ; by Denis Heymans and Catherine Romanowska, Hexion Research Belgium; and Marcelo Herszenhaut, Hexion Inc.
Two-component polyurethane systems (2K PU) are the most widely used topcoats for high...
|
|
from JPCL, January 2019 ; by Michael McGlamry, Hempel (USA), Inc.
|
|
from JPCL, January 2019 ; by John Myers, Carboline Company
With more than 400,000 tank cars carrying raw materials, intermediate chemicals and f...
|
|
from JPCL, December 2018 ; by Mike O’Donoghue, Ph.D.; Vijay Datta, MS; George Sykes; Graeme Ross and Ana Sanséau-Blanchard, M.Chem; AkzoNobel
This article focuses on a novel multi-polymeric matrix coating for corrosion under in...
|
|
from JPCL, November 2018 ; by JPCL Staff
Fouling of vessels occurs naturally in the marine environment and if not controlled, ...
|
|
from JPCL, September 2018 ; by Ben Rowland, Induron Protective Coatings, Inc.
The term "ceramic epoxy coatings" refers to an epoxy binder with ceramic media used a...
|
|
from JPCL, September 2018 ; by Hassan Al-Sagour and Mana Al-Mansour, Saudi Aramco
In the article, “Qualification Tests for High-Temperature FBE Coatings” in the July 2...
|
|
from JPCL, August 2018 ; by Dr. Mike O’Donoghue; Vijay Datta, MS; Ravi Nagarajan; Bill Dempster; Robin Wade, MA; and Sherman Spear, International Paint LLC
This article explores the footprint and characteristics of a novel and solvent-free, ...
|
|
from JPCL, July 2018 ; by Hassan Al-Sagour and Mana Al-Mansour, Saudi Aramco
As deeper gas wells have been discovered, gas is produced at higher temperatures than...
|
|
from JPCL, June 2018 ; by Anders Voldsgaard Clausen, Hempel A/S
Offshore wind farms require high-performance coatings that can protect the structures...
|
|
from JPCL, May 2018 ; by Saiada Fuadi Fancy, Md. Ahsan Sabbir and Kingsley Lau, Florida International University and Dale DeFord, Florida Department of Transportation
This article presents experimental results of coating degradation and corrosion devel...
|
|
from JPCL, April 2018 ; by Patrick Cassidy and James A. Ellor, P.E., Elzly Technology Corporation; and John Wegand, James Martin, Paul Slebodnick and James Tagert, U.S. Naval Research Laboratory
Over the past 20 years, the U.S. Navy has implemented the use of advanced ultra-high-...
|
|
from PaintSquare Press, Spring 2018
|
|
from PaintSquare Press, Spring 2018
|
|
from JPCL, February 2018 ; by Mike Dadik, P.E. S.E., Carollo Engineers, Inc.
Reinforced concrete has become a preferred building material for water storage and co...
|
|
from JPCL, March 2018 ; by Hank Bernacki, Zhenwen Fu, Bingquan Li, Denise Lindenmuth and Leo Procopio, The Dow Chemical Company
The challenge with epoxy chemistry is maintaining all of the excellent coating proper...
|
|
from JPCL, March 2018 ; by Dr. Mike O’Donoghue; Vijay Datta, Ms and Dr. Ian Fletcher, International Paint LLC.
The authors describe the genesis and performance of a step-change epoxy coating for h...
|
|
from JPCL, January 2018 ; by Gregg Blaszak, P.E., Milliken Infrastructure Solutions, LLC
|
|
from JPCL, January 2018 ; by Bobby Meade, Greenman Pedersen, Inc.; Derrick Castle, The Sherwin-Williams Company; and Theodore Hopwood II and Sudhir Palle, University Of Kentucky
Steel reinforced concrete bridge components are deteriorating prematurely, especially...
|
|
from JPCL, December 2017 ; by Todd Williams and Ahren Olson, Covestro LLC, and Paul Vinik, Florida Department of Transportation
Zinc-rich primers have been well studied, yet specifying inorganic (IOZ) or organic z...
|
|
from JPCL, October 2017 ; by Peter Bock, Performance Polymers LLC; James C. Reynolds, Performance Polymers BV
This article chronicles the evolution of el-evated temperature coatings from lard use...
|
|
from JPCL, August 2017 ; by Kenichi Nakamura, Roval, Japan; and Pascal Verbiest, Ph.D, EverZinc, Belgium
This article explains the formulation and performance of a waterbased (WB) zinc-rich ...
|
|
from JPCL, May 2017 ; by Dr. Mike O’Donoghue and Vijay Datta, International Paint LLC, and Glenn Hollins, Vision Integrity Engineering Ltd
The authors explore the performance of a high-ratio calcium sulfonate alkyd coating t...
|
|
from JPCL, March 2017 ; by Michael F. Melampy, PPG Protective and Marine Coatings
This article focuses on protective coatings as part of a three-pronged approach to pr...
|
|
from JPCL, January 2017 ; by Bobby Meade, Greenman-Pedersen Inc.; and Sudhir Palle and Theodore Hopwood II, University Of Kentucky
Bridges have been historically designed for a theoretical 50-year service life but in...
|
|
from JPCL, January 2017 ; by Yong Zhang, Olin Epoxy, Olin Corporation
The author discusses formulation of low-VOC and high-volume-solids coatings with impr...
|
|
from JPCL, February 2017 ; by Stuart G. Croll, Dr. Chunju Gu and Dr. Vinod Upadhyay, North Dakota State University; and Brent D. Keil, Northwest Pipe Company
Occasionally, construction delays can result in pipe sections remaining aboveground f...
|
|
from JPCL, December 2016 ; by Don Futch, Jotun Paints, Inc.
This article describes what certifies the “greenness” of a coating, the variables tha...
|
|
from JPCL, November 2016 ; by David A. Hunter, Hunter Engineering Consulting, Inc.
The author describes the background and basics of composite fiber-reinforced polymer ...
|
|
from JPCL, November 2016 ; by Erick Iezzi and James Tagert, U.S. Naval Research Laboratory
This article details a recently developed, novel moisture-curable, haze gray single-c...
|
|
from JPCL, September 2016 ; by Bob Murphy, Sherwin-Williams Protective & Marine Coatings
The author describes the evaluation protocol for coatings in aggressive sewer environ...
|
|
from JPCL, August 2016 ; by Kristin Leonard, Bechtel Corp.
When selecting protective coatings for chemical storage tanks, various issues come in...
|
|
from JPCL, July 2016 ; by James McCarthy, PPG Protective and Marine Coatings
|
|
from JPCL, July 2016 ; by Emre Aksu, Borusan Mannesmann; Alan Kehr, Alan Kehr Anti-Corrosion LLC; and Matt Dabiri, Consultant
In this article, the authors illustrate a comparison between a new flexible version o...
|
|
from JPCL, July 2016 ; by Patrick Cassidy, Elzly Technology Corporation and Paul Slebodnick, James Tagert and James Martin, U.S. Naval Research Lab
This article describes a study of the effect of profile type, profile height, the ext...
|
|
from JPCL, March 2016 ; by Gerald L. Witucki, Dow Corning Corporation
Silicon-based technologies have advanced coatings innovation by improving the durabil...
|
|
from JPCL, March 2016 ; by Günter Binder, Federal Waterways Engineering and Research Institute (BAW)
The author compares the accuracy of laboratory test results to that of long-term test...
|
|
from JPCL, March 2016
Polysiloxanes and the U.S. Navy
|
|
from JPCL, January 2016 ; by Ahren Olson and Todd Williams, Covestro LLC; Mark Hudson, The Sherwin-Williams Company; C. Wayne Fleming, Virginia Department of Transportation
Over the past decade, more than 100 steel bridges in the state of Virginia have been ...
|
|
from JPCL, January 2016
Which factors are most important in selecting coatings for new concrete?
|
|
from JPCL, December 2015
|
|
from JPCL, December 2015 ; by Pascal Verbiest, Dr. Sc., Umicore Zinc Chemicals
This article discusses testing carried out on zinc-rich primers where part of the zin...
|
|
from JPCL, November 2015 ; by Mike O'Donoghue, Ph. D. and Vijay Datta, M.S., International Paint LLC
The authors compare and contrast the accelerated laboratory autoclave performance of ...
|
|
from JPCL, November 2015 ; by E. Bud Senkowski, P.E., P.C.S., KTA-Tator, Inc.
This article describes the coating materials, surface preparation requirements and ap...
|
|
from JPCL, November 2015 ; by Brian Goldie, JPCL
Producing surfaces with high resistance to marine fouling and a high level of barnacl...
|
|
from JPCL, November 2015
|
|
from JPCL, August 2015 ; by Fred Goodwin and Frank Apicella, BASF Construction Chemicals
Corrosion in reinforced concrete has been an issue since it was first introduced and ...
|
|
from JPCL, July 2015 ; by C. Lefevre, M. Wenkin, M.H. Delvaux, Coatings Research Institute (CoRI)
In the paint market today, the use of bio-based products creates new challenges for p...
|
|
from JPCL, July 2015 ; by Xu Huanhui, CYG Changyuan New Materials Company, Shenzhen, China
The author explains how coupled with the appropriate application and quality control ...
|
|
from JPCL, July 2015 ; by Brian Goldie, JPCL
|
|
from PS Online Features, July 2015 ; by Bill Allen
|
|
from JPCL, June 2015 ; by Jayson L. Helsel, P.E., PCS, KTA-Tator, Inc. Richard A. Burgess, PCS, KTA-Tator, Inc., Series Editor
|
|
from JPCL, June 2015 ; by Hugues Dedeurwaerder, Coatings Research Institute
To ensure durability and corrosion protection in aggressive climates, the author disc...
|
|
from JPCL, May 2015 ; by Dudley J. Primeaux II, PCS, CCI, Joseph Haydu, CEO, and Jonathan Haydu, Bridge Preservation LLC
This article describes the use of liquid applied waterproofing membrane as a method o...
|
|
from JPCL, April 2015 ; by Marcelo Rufo, Air Products and Chemicals, Inc.
This article discusses formulation and curing agent options for epoxies that allow fo...
|
|
from JPCL, April 2015
|
|
from JPCL, March 2015 ; by Andrew Recker, BASF
This article explores the significant impact that formulation additives can have on i...
|
|
from JPCL, March 2015 ; by Hee-Baek Lee, Chung-Seo Park, Seong-Mo Son, Kyung-Jin Park
In an effort to determine the best solution for mitigating cavitation erosion of rudd...
|
|
from JPCL, February 2015 ; by Peter Bock, Advanced Polymerics, LLC
The author describes the use of thermal-spray aluminum coatings for preventing corros...
|
|
from JPCL, February 2015 ; by Emre Aksu, Borusan Mannesmann and Alan Kehr, Alan Kehr Anti-Corrosion, LLC
The authors discuss cathodic disbondment testing of fusion-bonded epoxy and three-lay...
|
|
from JPCL, January 2015 ; by Bob Parker, AGC Chemicals Americas, Inc.
This article describes fluoroethylene vinyl ether (FEVE) resin technology for bridge
...
|
|
from JPCL, December 2014 ; by Ron Knecht, Regional Market Segment Director, Oil & Gas, North America, The Sherwin-Williams Company
This article will discuss the latest coating technologies that can overcome the
chal...
|
|
from JPCL, November 2014 ; by Erick Iezzi, James Tagert, James Martin, Paul Slebodnick and John Wegand U.S. Naval Research Laboratory, Center for Corrosion Science and Engineering
This article details the development and testing of a sprayable siloxane, non-skid co...
|
|
from JPCL, November 2014 ; by Fred Goodwin & Frank Apicella, BASF Construction Chemicals
This article explains apples-to-apples performance testing of different grout types i...
|
|
from JPCL, November 2014 ; by Rick A. Huntley, PCS, Senior Coatings Consultant, KTA-Tator, Inc. Richard Burgess, PCS, KTA-Tator, Inc., Series Editor
What Can Happen When the Service Environment Isn’t Characterized or the Wrong Coating...
|
|
from JPCL, November 2014 ; by Adam Wynne Hughes, Pipeline Induction Heat Ltd, UK
This article illustrates coating technologies used to protect the ends of pipe length...
|
|
from JPCL, September 2014 ; by JPCL Staff
This article describes how intumescent coatings can achieve passive fire protection i...
|
|
from JPCL, August 2014 ; by Andreas aus der Wieschen, Matthias Wintermantel, Todd Williams and Ahren Olson, Bayer MaterialScience AG
This article describes polyurethane pipe coatings as a versatile product class that c...
|
|
from JPCL, The Facility Owner's Perspective 2014 Special Issue; by Dr. Mark R. Kolody, Jerome P. Curran and Dr. Luz Marina Calle, NASA Corrosion Technology Laboratory
This article discusses the test protocol required for coating systems to be included ...
|
|
from JPCL, August 2014 ; by Matthew Fletcher, International Paint Ltd.
The author explains the benefits of using different types of reinforced lining system...
|
|
from JPCL, July 2014 ; by Brian Goldie and Dan Mobbs, JPCL Europe
Antifouling coatings can increase fuel efficiency by reducing frictional resistance. ...
|
|
from JPCL, June 2014 ; by Sang Ki Chi, Seung Hyun Kim, and Byung Wan Kim Institute of Industrial Technology, Samsung Heavy Industries Co., Ltd.
To capitalize on the environmental and cost benefits of employing silicone foul-relea...
|
|
from JPCL, June 2014
What are the significant performance
differences between an inorganic zinc primer (e...
|
|
from JPCL, May 2014 ; by Shameem A. Khan, Maryland State Highway Administration
The author describes the results of various performance tests to determine whether tw...
|
|
from JPCL, May 2014 ; by E. Bud Senkowski, P.E., PCS, KTA-Tator, Inc., Richard A. Burgess, PCS, KTA-Tator, Inc., Series Editor
|
|
from JPCL, February 2014 ; by Daniel Totev, Air Products and Chemicals Europe B.V., and Marcelo Rufo, Air Products Brasil Ltda.
This article reviews the basics of high-solids epoxy coatings compared to conventiona...
|
|
from JPCL, November 2013 ; by Dr. David Tordonato, P.E., and Dr. Allen Skaja, P.C.S., U.S. Bureau of Reclamation
The authors discuss the use of metalizing, or thermal spray coating (TSC) application...
|
|
from JPCL, November 2013
Do water treatment processes to stop the transfer of invasive marine species in balla...
|
|
from JPCL, November 2013 ; by Gary Hall, Consultant
This article, the eighth in JPCL’s 2013 series on generic coating types, describes th...
|
|
from JPCL, October 2013 ; by JPCL Staff
The 2013 JPCL Coating Systems Buying Guide lists more than 4,400 recommendations for ...
|
|
from JPCL, September 2013 ; by Dr. Daniel J. Weinmann, Momentive Specialty Chemicals Inc.
This article provides an overview of the chemistry and properties of conventional epo...
|
|
from JPCL, September 2013 ; by Kevin Morris, The Sherwin-Williams Company
In this article, the author explains how corrosion occurs in sewer collection systems...
|
|
from JPCL, August 2013
|
|
from JPCL, Three Decades of Change in the Coatings Industry 2013 Special Issue; by Brian Goldie, Technical Editor, JPCL
|
|
from JPCL, Three Decades of Change in the Coatings Industry 2013 Special Issue; by The JPCL Staff
|
|
from JPCL, August 2013 ; by Michael Praw, BASF Corporation
This article is the sixth installment of JPCL’s 2013 series on generic coatings types...
|
|
from JPCL, August 2013
|
|
from JPCL, July 2013
|
|
from JPCL, July 2013 ; by Jeff Stewart, ITW Polymers Coatings North America
This article gives an overview of the key features needed for vinyl ester and epoxy t...
|
|
from JPCL, July 2013 ; by Leo J. Procopio, The Dow Chemical Company
This article is the fifth installment in JPCL’s 2013 series on generic coatings. The ...
|
|
from JPCL, July 2013
What action should be taken if an inorganic zinc (IOZ) fails the MEK test?
|
|
from JPCL, May 2013 ; by Pascal Verbiest, dr.sc., Umicore Zinc Chemicals
The author reviews the different types of zinc powders and how they are made, types a...
|
|
from JPCL, May 2013 ; by Rob Portsmouth, Huntsman Pigments
This article describes the background of solar reflective coatings technology and dis...
|
|
from JPCL, March 2013 ; by Sudhir Achar and Leo J. Procopio, The Dow Chemical Company
The authors describe their efforts to better understand the design, formulation, and ...
|
|
from JPCL, March 2013 ; by Kevin Buck, Huntsman
This article discusses the basics of polyureas, including the history of polyurea dev...
|
|
from JPCL, March 2013
|
|
from JPCL, February 2013 ; by Bob Parker, AGC Chemicals Americas
This article covers the basics of fluoropolymer coating systems, including a descript...
|
|
from JPCL, February 2013 ; by Robert Barnhart, retired from Devoe Coatings Co. (now International Paint LLC)
|
|
from JPCL, February 2013 ; by Brian Goldie, JPCL
What Are Smart Coatings?
|
|
from JPCL, February 2013
|
|
from JPCL, January 2013 ; by Gerald L. Witucki, Dow Corning Corporation
The author describes the development, properties, and uses of siloxane resins, with a...
|
|
from JPCL, January 2013 ; by Mike O’Donoghue, Ph.D., Vijay Datta, M.S., Stan Walker, Terry Wiseman, Peter Roberts, and Norb Repman, International Paint LLC
The authors summarize several advances in bridge coating systems made mainly over the...
|
|
from JPCL, January 2013
|
|
from JPCL, January 2013
|
|
from JPCL, September 2012 ; by Gary Hall, Sauereisen, Inc.
This article elaborates on the trends and materials of protection in fossil fuel-fire...
|
|
from JPCL, September 2012 ; by Dudley J. Primeaux II, PCS, CCI, Primeaux Associates LLC
This article discusses developments in polyurea technology as well as the importance ...
|
|
from JPCL, June 2012 ; by Brian Goldie
The author summarizes several presentations related to future raw material supplies f...
|
|
from JPCL, May 2012 ; by R.A. Francis, Ph.D., Aurecon; G. Mattioli, Mattioli Bros.; and S. Smith, Melbourne Water
The authors discuss the issues involved in selecting a tank lining that provides the ...
|
|
from JPCL, March 2012 ; by Lee Wilson, Consultant
In the article, the author gives his perspective on the field performance of polysilo...
|
|
from JPCL, February 2012 ; by Massimo Cornago, Consultant
The author describes the approach of one oil company in the selection of different co...
|
|
from JPCL, February 2012 ; by Dr. Mike O'Donoghue, Vijay Datta, MS, Dr. Adrian Andrews, Sean Adlem, and Matthew Giardina, International Paint, LLC; Nicole de Varennes, CET, Linda G.S. Gray, MSc, and Damien Lachat, RAE Engineering and Inspection Ltd.; and Bill Johnson, AScT, Acuren Group Inc.
This article reports on research into coatings primarily for the undercover realm of ...
|
|
from JPCL, October 2011 ; by the JPCL Staff
The 2011 JPCL Coating Systems Buying Guide lists more than 5,200 recommendations for ...
|
|
from JPCL, September 2011 ; by Stephen M. Wierzchowski
|
|
from JPCL, September 2011 ; by Valerie D. Sherbondy, Senior Chemist, KTA-Tator, Inc., and Richard A. Burgess, Series Editor, KTA-Tator, Inc.
In this F-Files, the author investigates what went wrong when a fusion-bonded epoxy
...
|
|
from JPCL, April 2011 ; by Mike O’Donoghue, Ph.D.; V.J. Datta, MS; and Russell Spotten, International Paint, LLC
The authors examine the "angels and demons" that coatings with exempt solvents pose f...
|
|
from JPCL, January 2011 ; by Pradeep Kodumuri, SES Group & Associates, and Seung-Kyoung Lee, Federal Highway Administration, Turner-Fairbank Highway Research Center
The authors present an overview of the work plan and first data sets collected
from ...
|
|
from JPCL, December 2010 ; by Anders Braekke, Jotun A/S
The author discusses some of the reasons for adhesion failure in polysiloxane product...
|
|
from JPCL, December 2010 ; by Dr. Ilhan Ulkem and Mike Winter, Worldwide Protective Coatings, International Paint, LLC/AkzoNobel, Inc.
In this article, the authors summarize problems manufacturers and end users encounter...
|
|
from JPCL, November 2010 ; by Brian Goldie, JPCL
The article covers acquisitions in the paint industry known to JPCL that have taken p...
|
|
from JPCL, October 2010 ; by JPCL Staff
The 2010 JPCL Coating Systems Buying Guide lists more than 4,000 recommendations for ...
|
|
from JPCL, September 2010 ; by Brian Goldie, JPCL
The author summarizes some of the developments
in pipeline protection that were disc...
|
|
from JPCL, September 2010 ; by Vaughn O'Dea, Caleb Parker, and Rémi Briand, Tnemec Company
The authors report on ongoing research about the effect of permeation resistance of c...
|
|
from JPCL, September 2010 ; by Christina M. Stewart, Chemist, KTA-Tator, Inc. Richard Burgess, KTA-Tator, Inc., Series Editor
|
|
from JPCL, July 2010 ; by Dudley J. Primeaux II, PCS, CCI, Primeaux Associates, LLC
This article compares earlier accelerated weathering testing for UV stability to real...
|
|
from JPCL, July 2010 ; by Allen Skaja, U.S. Bureau of Reclamation
|
|
from JPCL, June 2010 ; by James D. Machen, Senior Coatings Consultant, KTA-Tator, Inc. Richard Burgess, KTA-Tator, Inc., Series Editor
|
|
from JPCL, May 2010 ; by Mike O'Donoghue, Ph.D., Vijay Datta, M.S., Mike Winter, and Carl Reed, International Paint, LLC
This article discusses several instances where assumptions made about coating specifi...
|
|
from JPCL, May 2010 ; by Kenneth B. Tator, KTA-Tator, Inc. and Richard A. Burgess, KTA-Tator, Inc., Series Editor
|
|
from JPCL, March 2010 ; by Karsten Mühlberg, Hempel (Germany) Ltd.
The author discusses the importance of corrosion protection on offshore wind turbines...
|
|
from JPCL, March 2010 ; by John Bullard, Port Authority of New York & New Jersey, and William D. Corbett, KTA-Tator, Inc.
In this article, the authors report on the surface preparation and
coating system se...
|
|
from JPCL, January 2010
What makes a coating suitable for stainless steel, independent of exposure?
|
|
from JPCL, December 2009 ; by Winn Darden and Bob Parker, AGC Chemicals Americas; and Naoko Sumi, Isao Kimura, Masakazu Ataku, and Takashige Maekawa, Asahi Glass Co. Ltd.
this article describes solvent-borne and waterborne FEVE resins as well as the potent...
|
|
from JPCL, November 2009 ; by David E. Snider and Heather M. Ramsey, Sauereisen Inc.
|
|
from JPCL, November 2009 ; by Paul Vinik, MSChE, P.E., Florida Department of Transportation and Richard A. Burgess, B.S. , M.S., KTA-Tator, Inc.
|
|
from JPCL, November 2009 ; by Andreas W. Momber, Ph.D., Muehlhan AG; Peter Plagemann, Ph.D., and Volkmar Stenzel, Ph.D., Fraunhofer Institute for Manufacturing and Applied Materials Research; and Michael Schneider, Ph.D., Fraunhofer Institute for Ceramic Technologies and Systems
In Part 3 of a three-part series, the authors report on corrosive stress on offshore ...
|
|
from JPCL, November 2009 ; by Serafin Barreiro, Hempel A/S, Kgs.
The author reports on a laboratory study intended to devise an appropriate test metho...
|
|
from JPCL, October 2009 ; by Richard Burgess and Kenneth B. Tator, KTA-Tator, Inc.
Filiform Corrosion of Powder-Coated Aluminum on the Gulf Coast
|
|
from JPCL, October 2009 ; by JPCL Staff
The 2009 JPCL Coating Systems Buying Guide lists more
than 10,000 recommendations fo...
|
|
from JPCL, October 2009
|
|
from JPCL, October 2009
|
|
from JPCL, October 2009
|
|
from JPCL, October 2009
|
|
from JPCL, October 2009
|
|
from JPCL, October 2009
|
|
from JPCL, October 2009
|
|
from JPCL, October 2009
|
|
from JPCL, October 2009
|
|
from JPCL, October 2009
|
|
from JPCL, October 2009
|
|
from JPCL, October 2009
|
|
from JPCL, October 2009
|
|
from JPCL, October 2009 ; by Madelyn Harding, The Sherwin-Williams Company
|
|
from JPCL, September 2009 ; by D. Melot, G. Paugam, and M. Roche, Total SA, France
This article updates and completes information on recent cases of pipeline coating fa...
|
|
from JPCL, August 2009 ; by Mike O'Donoghue, Ph.D.; Peter Roberts; Vijay Datta, MS; and Terry McManus
When selecting an overcoating system, specifiers must consider several crucial factor...
|
|
from JPCL, August 2009 ; by David Boyd, Vulcan Painters, Inc.
As an industrial painting contractor, like contractors in other trades, I've seen and...
|
|
from JPCL, August 2009 ; by Michael Donkin, International Paint Ltd.
Massive changes have occurred in coating formulation for the heavy-duty market in the...
|
|
from JPCL, August 2009 ; by Raymond Tombaugh, Senior Coatings Consultant, KTA-Tator, Inc. Richard A. Burgess, KTA-Tator, Inc., Series Editor
Catastrophic Disbonding of an "Encapsulating Coating" Applied to Hot-Dip Galvanizing
|
|
from JPCL, August 2009 ; by Harold Hower, Technology Publishing/PaintSquare
The past 25 years will likely be seen as the Golden Age of information technology, wh...
|
|
from JPCL, July 2009 ; by Brian Goldie and Karen Kapsanis, JPCL
This article reviews how the environment for corrosion under thermal insulation (CUI)...
|
|
from JPCL, July 2009
|
|
from JPCL, July 2009 ; by Bruce Rutherford, Operations Manager, KTA-Tator, Inc.; Richard Burgess, KTA-Tator, Inc., Series Editor
|
|
from JPCL, July 2009 ; by Brian Goldie, JPCL
The author discusses trends in “green” raw materials that were introduced to the coat...
|
|
from JPCL, June 2009
|
|
from JPCL, June 2009 ; by Cynthia L. O'Malley, KTA-Tator, Inc.; Richard Burgess, KTA-Tator, Inc. Series Editor
Anticipating the Service Environment for Proper Coating System Selection
|
|