Problem Solving Forum (9)


What is the maximum number of holidays that should be permitted for linings used in immersion service, and why?


For coatings with a high-solids content (95% or more), what kinds of defects, such as holidays or micropores, are possible or likely to occur in the applied film? How can these be prevented or remedied?


When SSPC-SP3 (Power Tool Cleaning) is specified, how should one decide when to apply the tool to the entire surface and when to use it just where the coating appears defective or rusting?


When SSPC-SP3 (Power Tool Cleaning) is specified, how should one decide when to apply the power tool to the entire surface and when to use it just where the coating appears to be defective or rusting?


What is the risk of damaging a paint film by inspecting a repaired area more than twice with a high-voltage holiday detector?


For coatings with a high-solids content (95 percent or more), what kinds of defects, such as holidays or micropores, are possible or likely to occur in the applied film? How can these be prevented or remedied?


What causes bubbling or cratering of epoxy intermediate coat when applied over epoxy zinc-rich primer?


On guardrails on a marine wharf, grating panels consisting of mild steel bars about 1/8-inch by 1-inch on a 2-inch-square grid were painted with a three-coat zinc/epoxy/urethane system. Inspectors are finding numerous pinholes in the finish coat along the inside corners of the grating where the 1-inch-thick bars meet at a 90-degree angle. These pinholes were not noticed in the zinc or epoxy coats, but the final coat's visual inspection is more detailed. What is the likely cause of the pinholing, and what could be done to prevent it on future applications? Also, what should the disposition of the parts with pinholes be, as in, repair, accept as is, reblast and recoat, or an alternative?


For coatings with a high-solids content (95% or more), what kinds of defects, such as holidays or micropores, are possible or likely to occur in the applied film? How can these be prevented or remedied?


 
 
   

**Commercial white papers, product videos, and other sponsored documents posted on this site are paid content from third-party companies; inclusion and posting on this site does not imply an endorsement nor recommendation of the content by Technology Publishing/PaintSquare. By signing in and viewing or downloading this paid content, you agree to make your name and full contact information available to the sponsor of the content.

Advertisements
 
MineralTech

 
Quikspray, Inc.

 
Tarps manufacturing, Inc.

 
Modern Safety Techniques

 
Nationwide Overspray

 
PRIMEAUX ASSOCIATES LLC

 
Just Like New Overspray Management

 
Seymour Midwest

 
Axxiom Manufacturing

 
Sidewinder/Persyst Enterprises, Inc.

 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@paintsquare.com


The Technology Publishing Network

PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy Policy   |   Terms & Conditions   |   Support   |   Site Map   |   Search   |   Contact Us