Problem Solving Forum (13)


Is there any method to take accurate wet film thickness readings when applying zinc rich primers?


What are the pros and cons of using an organic vs. inorganic zinc primer?


Should pull-off adhesion tests be carried out on a zinc-rich primer alone, or only on a complete system?


Is there any method to take accurate wet film thickness readings when applying zinc rich primers?


What would be a reasonable service life for a two-coat, zinc-rich epoxy/epoxy mastic system, about 200-250 microns, in a marine environment? What evidence is there from the field?


What are the significant performance differences between an inorganic zinc primer (ethyl silicate) and an organic zinc primer (epoxy), given the same application and exposure conditions?


What causes bubbling or cratering of epoxy intermediate coat when applied over epoxy zinc-rich primer?


How does a lower-metallic-content zinc-rich epoxy affect the life of a paint system?


What are the pros and cons of using an organic vs. inorganic zinc primer?


What are the significant performance differences between an inorganic zinc primer (ethyl silicate) and an organic zinc primer (epoxy), given the same application and exposure conditions?


How do you measure wet film thickness on shop-applied organic zinc-rich primers to accurately predict dry film thickness?

Our shop applies a great deal of OZ primer, and we have found that WFT readings with a standard gauge are not accurate predictors of DFT.


What are the significant differences in performance between an inorganic zinc primer (ethyl silicate) and an organic zinc primer (epoxy), given the same application and exposure conditions?


If I apply a zinc-rich epoxy primer at 3 mils’ dry film thickness in the shop with air temperature of 90 F, what checks can I make to determine when it is safe to handle and stack the primed steel components?


 
 
   

**Commercial white papers, product videos, and other sponsored documents posted on this site are paid content from third-party companies; inclusion and posting on this site does not imply an endorsement nor recommendation of the content by Technology Publishing/PaintSquare. By signing in and viewing or downloading this paid content, you agree to make your name and full contact information available to the sponsor of the content.

Advertisements
 
Mitsubishi Gas Chemical America

 
KTA-Tator, Inc. - Corporate Office

 
NLB Corporation

 
DeFelsko Corporation

 
ABKaelin, LLC

 
Fischer Technology Inc.

 
HoldTight Solutions Inc.

 
Modern Safety Techniques

 
SAFE Systems, Inc.

 
Sidewinder/Persyst Enterprises, Inc.

 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@paintsquare.com


The Technology Publishing Network

PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy Policy   |   Terms & Conditions   |   Support   |   Site Map   |   Search   |   Contact Us