Articles (36)


Investigating Failure

from JPCL, April 2019


Investigating Failure

from JPCL, June 2018 ; by Cheryl Roberts, KTA-Tator, Inc.

Delamination of Coating from a Ship’s Hull


Office to Field: Lost in Translation

from JPCL, December 2017 ; by Troy Fraebel, ABKaelin, LLC

Inspection of Field-Applied, Thin-Film Intumescent Paint


SSPC Moisture Testing Guide and Pinhole Standard

from D+D In Depth, November 2017 ; by KENNETH A. TRIMBER, KTA-TATOR, INC.

The SSPC Commercial Coatings Committee addresses the need for more standards and guid...


History Is Investigation: An Introduction to Historic Finish Analysis

from D+D In Depth, June 2017 ; by ALLEN ZIELNIK, ATLAS MATERIAL TESTING TECHNOLOGY LLC

In the world of historic preservation, paint analysis is frequently used to identify ...


Wind-Driven Rain Resistance Testing of Exterior Coating Systems

from D+D In Depth, June 2017 ; by KEVIN BROWN AND JULIE GLOVER, KTA-TATOR INC.

An exterior wall coating with inadequate resistance to rainwater penetration can lead...


Bedeviled Bridges: An Answer to a National Scandal

from JPCL, May 2017 ; by Dr. Mike O’Donoghue and Vijay Datta, International Paint LLC, and
Glenn Hollins, Vision Integrity Engineering Ltd

The authors explore the performance of a high-ratio calcium sulfonate alkyd coating t...


Beyond Airtightness: Factors To Consider When Selecting An Air Barrier

from D+D Print, Spring 2017 ; by Stanley Yee, Leed AP, Dow Corning Corporation

Get to know the available material options and how the materials will perform togethe...


Building Consensus: How to Approach Moisture in Your Next Project

from D+D Print, Spring 2017 ; by Amy Woodall, Editor

Moisture intrusion is one of the biggest painting contractor concerns, and it’s impor...


Challenges Encountered with In-Process Cleaning and Painting of Buildings

from D+D Print, Spring 2017 ; by Kenneth A. Trimber, KTA-Tator, Inc.

Get answers to questions regarding surface preparation, application and final thickne...


Moisture In CMUs: When Is It Safe To Paint?

from D+D Print, Spring 2017 ; by Zenith F. Czora, Crommelin

When it comes to concrete block, the successful coatings application often requires k...


Corrosion: Domesticated and in the Wild

from JPCL, February 2017 ; by Carl W. Reed, GPI Laboratories, Inc., and Kat Coronado, International Paint, LLC

This article examines the four predominant sources of corrosion that occur “in the wi...


MVT and Alkalinity in Concrete: Preparing for Floor Coating Systems

from D+D In Depth, January 2017 ; by Joe Schmit, Tnemec Company Inc.

It is important to understand what happens below the concrete surface when a resinous...


Shop Coat Versus Field Coat: the Pros and Cons

from JPCL, September 2016 ; by Charles S. Brown, Greenman-Pedersen, Inc.

There seems to be a trend for bridge owners to believe that applying all three coats ...


Induction Heating for Cold Weather Preheating and Post-Curing Of Liquid Epoxy Coatings On Gas Pipeline Girth Welds

from JPCL, February 2016 ; by Bruce J. Wiskel, P.E., Pacific Gas & Electric Company; and J. Peter Ault, P.E., Elzly Technology Corporation

The authors discuss the challenges of applying coatings to transmission pipeline when...


Final Free Webinars of 2015 Offered in December

from JPCL, November 2015


Concrete Floor Coatings Forensics Case History — Part 1, Field Investigation Phase

from JPCL, August 2015 ; by James D. Machen, KTA-Tator, Inc. Richard A. Burgess, PCS, KTA-Tator, Inc., Series Editor


The straws that broke the camel’s back

from JPCL, July 2015 ; by Dwight G. Weldon, Weldon Laboratories, Inc.


The Power of Prep

from D+D Print, December 2014 ; by Fred Goodwin, FICRI, FACI, BASF Construction Chemicals

Proper surface preparation on concrete means the difference between coating success a...


Making It Stick

from D+D Print, October 2014 ; by James D. Machen, KTA-Tator, Inc.

Overcoating factory-finished architectural metal poses problems, but proper prep can ...


All Wet

from D+D Print, September 2014 ; by Fred Goodwin, BASF Construction Chemicals

What you don’t know about moisture-testing concrete floors can cost you.


Improving Polyurethane Pipe Coatings for Harsh Conditions

from JPCL, August 2014 ; by Andreas aus der Wieschen, Matthias Wintermantel, Todd Williams and Ahren Olson, Bayer MaterialScience AG

This article describes polyurethane pipe coatings as a versatile product class that c...


Qualifying Coatings for NASA Launch Facilities

from JPCL, The Facility Owner's Perspective 2014 Special Issue; by Dr. Mark R. Kolody, Jerome P. Curran and Dr. Luz Marina Calle, NASA Corrosion Technology Laboratory

This article discusses the test protocol required for coating systems to be included ...


Bridge Coating Performance: Two-Coat vs. Three-Coat Systems

from JPCL, May 2014 ; by Shameem A. Khan, Maryland State Highway Administration

The author describes the results of various performance tests to determine whether tw...


Retrofit Put to the Test

from D+D Print, April 2014 ; by Brian H. Neely, AIA, NCARB, CDT, and Joshua T. Hogan, E.I.T., CDT, Gale Associates Inc.

Testing shows where a building envelope retrofit succeeds and where opportunities rem...


Understanding Slip Coefficient and Tension Creep Testing of Coatings Used in Slip-Critical Bolted Connections

from JPCL, January 2014 ; by William D. Corbett, PCS, and Carly M. McGee, PCS, KTA-Tator, Inc.

The authors will explain the methods and processes of slip coefficient and tension cr...


Testing adhesion of multi-coat systems

from JPCL, October 2013

When should the adhesion of an applied coating or lining multi-coat system be tested?


SSPC's Latest Paint Application Standards Meet Field and Lab Needs

from JPCL, Three Decades of Change in the Coatings Industry 2013 Special Issue; by The JPCL Staff


Laboratory and Field Testing Of Thin-Film Air Barrier Coatings Applied To CMU

from D+D Print, July/August 2013 ; by Kevin Knight, Retro-Specs Ltd.

Air barriers have become a means of reducing energy consumption, decreasing mold clai...


When an IOZ fails the MEK test

from JPCL, July 2013

What action should be taken if an inorganic zinc (IOZ) fails the MEK test?


Comparing Test and Field Performance of Thick-Film Elastomeric Polyureas

from JPCL, July 2010 ; by Dudley J. Primeaux II, PCS, CCI, Primeaux Associates, LLC

This article compares earlier accelerated weathering testing for UV stability to real...


Overcoating the Caruthersville Bridge: Met the Challenges from System Selection to Application and Protection

from JPCL, May 2010 ; by Ernst Toussaint, EIT; Ross Sherwood, EIT, Tennessee Department of Transportation; and Scott Stotlemeyer, PE, Missouri Department of Transportation

The authors discuss the unique requirements of the calcium sulfonate system used on t...


Cases from the F-Files: The Case of...A Failure to Communicate

from JPCL, February 2010


Cases from the F-Files: The Case of Improper Selection of a Maintenance Strategy Takes Corrosion Protection from Bad to Worse

from JPCL, January 2010 ; by Valerie Sherbondy, Senior Chemist, KTA-Tator, Inc., and Richard Burgess, KTA-Tator, Inc., Series Editor

Maintenance takes drawbridge from bad to worse


Investigating Corrosion Protection of Offshore Wind Towers, Part 3: Results of the Laboratory Investigations

from JPCL, November 2009 ; by Andreas W. Momber, Ph.D., Muehlhan AG; Peter Plagemann, Ph.D., and Volkmar Stenzel, Ph.D., Fraunhofer Institute for Manufacturing and Applied Materials Research; and Michael Schneider, Ph.D., Fraunhofer Institute for Ceramic Technologies and Systems

In Part 3 of a three-part series, the authors report on corrosive stress on offshore ...


2009 Annual Directory of Architectural Coatings Consultants

from JAC, October/November 2009

From technical functions to design services, from project management to spec writing,...


 
 
   

**Commercial white papers, product videos, and other sponsored documents posted on this site are paid content from third-party companies; inclusion and posting on this site does not imply an endorsement nor recommendation of the content by Technology Publishing/PaintSquare. By signing in and viewing or downloading this paid content, you agree to make your name and full contact information available to the sponsor of the content.

Advertisements
 
Sidewinder/Persyst Enterprises, Inc.

 
DeFelsko Corporation

 
NLB Corporation

 
Fischer Technology Inc.

 
ABKaelin, LLC

 
KTA-Tator, Inc. - Corporate Office

 
SAFE Systems, Inc.

 
WEFTEC Show

 
HoldTight Solutions Inc.

 
Modern Safety Techniques

 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@paintsquare.com


The Technology Publishing Network

PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy Policy   |   Terms & Conditions   |   Support   |   Site Map   |   Search   |   Contact Us