from JPCL, August 2019 ; by Murray Heywood, Sherwin-Williams Protective & Marine Coatings
When lining new steel potable-water storage tanks or rehabilitating existing ones, as...
|
|
from JPCL, June 2019 ; by Leah K. Tipton, KTA-Tator, Inc.
The word isocyanate on a product label or safety data sheet might prompt the selectio...
|
|
from D+D In Depth, September 2017 ; by Steven Reinstadtler and Robert Wade, Covestro LLC
The evolution of water-based UV-cured wood coating technology has led to the availabi...
|
|
.jpg)
from D+D In Depth, May 2017 ; by BRIAN KELLY, KEMPER SYSTEM AMERICA, INC.
Landscaping is no longer limited to the grounds surrounding the building, but is find...
|
|
from JPCL, February 2017 ; by Stuart G. Croll, Dr. Chunju Gu and Dr. Vinod Upadhyay, North Dakota State University; and Brent D. Keil, Northwest Pipe Company
Occasionally, construction delays can result in pipe sections remaining aboveground f...
|
|
from JPCL, December 2016 ; by Peter Kronborg Nielsen, FORCE Technology
Following an uncertain start, the present offshore coatings systems for wind farms ha...
|
|
from D+D In Depth, December 2016 ; by Allen Zielnik, Atlas Material Testing Technology
Polyurea is newer on the scene and features performance characteristics that other, t...
|
|
from D+D In Depth, August 2016 ; by Allen Zielnik, ATLAS Material Testing Technology LLC
Wood is one of our most versatile and beautiful building and decorative materials, bu...
|
|
GoingtoExtremes4-15.jpg)
from D+D Print, April 2015 ; by Allen Zielnik, Atlas Material Testing Technology LLC
Select the right coating for the best performance in tough service environments.
|
|
ODonoghue.jpg)
from JPCL, January 2014 ; by Mike O’Donoghue, Ph.D., and Vijay Datta, MS, International Paint LLC
This article is focused primarily on very fast-cure, solvent-free polyurethanes, poly...
|
|
from JPCL, November 2013 ; by Jayson L. Helsel, P.E., PCS, KTA-Tator, Inc. and Richard Burgess, KTA-Tator, Inc. Series Editor
|
|
|
from JPCL, October 2013 ; by Anita Socci, JPCL
|
|
|
from JPCL, September 2013
|
|
from JPCL, September 2013 ; by James D. Machen, PCS, KTA-Tator, Inc.
Richard Burgess, KTA-Tator, Inc., Series Editor
|
|
Poly.jpg)
from JPCL, August 2013 ; by Michael Praw, BASF Corporation
This article is the sixth installment of JPCL’s 2013 series on generic coatings types...
|
|
|
from JPCL, August 2013
|
|
|
from JPCL, May 2013
What causes blistering and crater formation
in freshly applied polyurethane topcoats...
|
|
FramingArchPolyurethane.jpg)
from D+D Print, January/February 2013 ; by Steven Reinstadtler, Bayer MaterialScience LLC
Polyurethane coating technology has transformed our structural world. In this article...
|
|
|
from JPCL, January 2012 ; by Eric S. Kline, KTA-Tator, Inc., Richard A. Burgess, Series Technical Editor
|
|
from JPCL, November 2011 ; by Benjamin Fultz, Bechtel Corporation; William D. Corbett, KTA-Tator, Inc.; and Kurt Best, Bayer MaterialScience
This article reports on a study that compared the handling of three generic types of ...
|
|
|
from JPCL, May 2011 ; by Chris McMillan, International Paint, LLC
|
|
|
from JPCL, May 2011
|
|
|
from JPCL, April 2011 ; by Cynthia L. O’Malley, Scott Christensen, and Gina Neilson
|
|
from D+D Online Features, March 2011 ; by Jill M. Speegle
Above an ancient archaeological site in the heart of Seville, Spain, stands a strikin...
|
|
from D+D Online Features, February 2011 ; by Margaret Kendi, Pete Schmitt and Raymond Stewart
Material-science advancements in one-component (1K) water-borne urethane coatings hav...
|
|
from D+D Online Features, November 2010 ; by Joe Maty
Boosted by a powerful solar component, Virginia Tech’s LUMENHAUS sprinted to first-pl...
|
|
from D+D Online Features, October 2010 ; by Steven Reinstadtler
Whether the setting is a college commons area, a famous motor-speedway attraction or ...
|
|
|
from JPCL, January 2010 ; by Valerie Sherbondy, Senior Chemist, KTA-Tator, Inc., and Richard Burgess, KTA-Tator, Inc., Series Editor
Maintenance takes drawbridge from bad to worse
|
|
|
from JPCL, December 2009 ; by Rick A. Huntley, Senior Coatings Consultant, KTA-Tator, Inc.; Richard Burgess, KTA-Tator, Inc., Series Editor
The Case of the Failing Floor Coating
|
|
|
from JPCL, December 2009
|
|
|
from JPCL, November 2009 ; by Paul Vinik, MSChE, P.E., Florida Department of Transportation and Richard A. Burgess, B.S. , M.S., KTA-Tator, Inc.
|
|
|
from JPCL, November 2009 ; by Andreas W. Momber, Ph.D., Muehlhan AG; Peter Plagemann, Ph.D., and Volkmar Stenzel, Ph.D., Fraunhofer Institute for Manufacturing and Applied Materials Research; and Michael Schneider, Ph.D., Fraunhofer Institute for Ceramic Technologies and Systems
In Part 3 of a three-part series, the authors report on corrosive stress on offshore ...
|
|
from JAC, October/November 2009 ; by Mitch Clifton, NCFI Polyurethanes
Spray foam, combined with reflective topcoat, pays dividends in the energy-efficient ...
|
|
|
from JPCL, August 2009
Product News: Floor Coating Cures with UV; Accelerated Test Can Mimic 63 Years of UV;...
|
|
from JAC, August/September 2009 ; by Burt Olhiser, Vantage Point Consulting
Restoration team muster its expertise, energy to rehabiliate and adapt significant ex...
|
|
|
from JPCL, August 2009 ; by Michael Donkin, International Paint Ltd.
Massive changes have occurred in coating formulation for the heavy-duty market in the...
|
|
|
from JPCL, June 2009 ; by Cynthia L. O'Malley, KTA-Tator, Inc.; Richard Burgess, KTA-Tator, Inc. Series Editor
Anticipating the Service Environment for Proper Coating System Selection
|
|
|
from JAC, May 2009 ; by Peter Schmitt and Kathy Allen, Bayer MaterialScience LLC
R&D program produces water-borne polyurethane formulations that combine low VOCs, red...
|
|
from JPCL, April 2009 ; by Timothy Race, Kaked LLC
This article gives an overview of steel piling and its uses; reasons for coating it; ...
|
|
from JAC, March/April 2009 ; by Bob Brenk, Aldo Products Company Inc.
Restoration with reflective coatings serves multiple objectives, including enhanced e...
|
|
|
from JAC, March/April 2009
|
|
|
from JAC, March/April 2009
A sampling of materials that offer an expanding array of choices to boost the appeara...
|
|
from JAC, March/April 2009 ; by Allen Zielnik, Atlas Material Testing Technology LLC
The coatings technology gets points for its 'green' profile and resistance properties...
|
|
|
from JAC, January/February 2009 ; by Allen Zielnik, Atlas Material Testing Technology LLC
Effectiveness, economics loom large in the search for strategies that will pass muste...
|
|
|
from JAC, January/February 2009 ; by Jayson L. Helsel, P.E., KTA-Tator Inc.
Advances in technology expand the choices of high-performance finishes for metallic s...
|
|
from JAC, January/February 2009 ; by JAC Staff
Visuals and performance both loomed large when the operators of the Naples, FL, Philh...
|
|
|
from JAC, December 2008
|
|
|
from JPCL, December 2008 2008 ; by JPCL Staff
|
|
|
from JAC, March/April 2008 ; by Allen Zielnik, Atlas Material Testing Technology, LLC
An array of water-repellent and waterproofing measures are enlisted in the never-endi...
|
|
|
from JAC, January/February 2008 ; by Jayson L. Helsel, P.E.
With stucco, chemistry, attention to surface preparation hold key to formulating effe...
|
|
|
from JAC, December 2007 ; by Joe Maty, Editor, JAC
To accompany this issue’s Buying and Specifying Guide, we present this review of the ...
|
|
|
from JAC, August/September 2007
With a variety of pools, spas, saunas, fountains, and other aquatic features spread o...
|
|
from JAC, June/July 2007 ; by Jayson L. Helsel, KTA-Tator and Joe Maty, JAC Editor
In the current realm of roof-coatings technologies, the specifier, arhitect, or build...
|
|
|
from JAC, March/April 2007 ; by Joe Maty, Editor, JAC
They say beauty is in the eye of the beholder. In the case of grafitti, however, the ...
|
|
|
from JAC, March/April 2007 ; by Roger C. Mabe, PPG Industries, Inc.
After more than 20 years, the exterior metal of the high-rise office building on the ...
|
|
|
from JAC, March/April 2007 ; by Jim Dunaway, Wes Hensley, and Steve Mishra, Tremco Commercial Sealants & Waterproofing
Parking spaces can be a scarce commodity in many urban areas. One solution to this pr...
|
|
|
from JAC, June/July 2006 ; by Chris J. Marshall, Bayer MaterialScience LLC
Hybrid Polyurethane thick-film coatings for metal roofs deliver an impressive package...
|
|
from JAC, June/July 2006
In Katrina’s wake: Superdome restoration marches forward at the speed of an NFL offen...
|
|
|
from JAC, Feburary/March 2006
The iconic image of the flag raisers on the Pacific Island of Iwo Jima will be etched...
|
|
|
from JAC, Feburary/March 2006
The new convention center in Ocean Shores, WA, required coatings materials that would...
|
|
from JAC, January 2006
An ambitious renovation project set in a once-bustling grain-milling district sought ...
|
|
|
from JAC, January 2006 ; by Edward P. Squiller, Ph.D., Bayer MaterialScience
Physical and performance properties of polyurethanes are described by the author, as ...
|
|
from JAC, January 2006
In stark contrast to the concerted reconstruction task at the 90 West Street building...
|
|
|
from JAC, October 2005 ; by Joe Maty
Several notable historic preservation and restoration projects are reviewed in this S...
|
|
|
from JAC, July 2005 ; by Peter Brown and Andrew Wilson
This review explores current directions in school planning and design and examines im...
|
|
from JAC, April 2005 ; by John Williams
The author describes how to select coating systems for various exposure environments ...
|
|
|
from JAC, April 2005
The U.S. Green Building Council (USGBC) recently issued a “first public-comment draft...
|
|
|
from JAC, January 2005 ; by Joe Maty
The ambitious makeover of Seattle’s McCaw Hall has won rave reviews; the supporting c...
|
|
