from JPCL, November 2019 ; by Dr. Mike O’Donoghue and Vijay Datta, MS, International Paint LLC
Twenty-five years ago, an icebreaker coating primarily designed for the underwater hu...
|
|
from JPCL, September 2019 ; by Mike Manetta, Sherwin-Williams Protective & Marine Coatings
Although the freight-rail business is potentially very profitable, about 40 cents of ...
|
|
from JPCL, August 2019
|
|
from JPCL, March 2019 ; by Mike O’Donoghue, Ph.D. and Vijay Datta, MS, International Paint LLC; and Margaret Pardy, Mag Consulting Inc.
This article discusses performance and productivity issues associated with a tandem a...
|
|
from JPCL, September 2018 ; by Ben Rowland, Induron Protective Coatings, Inc.
The term "ceramic epoxy coatings" refers to an epoxy binder with ceramic media used a...
|
|
from JPCL, August 2018 ; by Dr. Mike O’Donoghue; Vijay Datta, MS; Ravi Nagarajan; Bill Dempster; Robin Wade, MA; and Sherman Spear, International Paint LLC
This article explores the footprint and characteristics of a novel and solvent-free, ...
|
|
from JPCL, May 2018 ; by Saiada Fuadi Fancy, Md. Ahsan Sabbir and Kingsley Lau, Florida International University and Dale DeFord, Florida Department of Transportation
This article presents experimental results of coating degradation and corrosion devel...
|
|
from JPCL, April 2018 ; by Patrick Cassidy and James A. Ellor, P.E., Elzly Technology Corporation; and John Wegand, James Martin, Paul Slebodnick and James Tagert, U.S. Naval Research Laboratory
Over the past 20 years, the U.S. Navy has implemented the use of advanced ultra-high-...
|
|
from JPCL, March 2018
|
|
from JPCL, March 2018 ; by Hank Bernacki, Zhenwen Fu, Bingquan Li, Denise Lindenmuth and Leo Procopio, The Dow Chemical Company
The challenge with epoxy chemistry is maintaining all of the excellent coating proper...
|
|
from JPCL, March 2018 ; by Dr. Mike O’Donoghue; Vijay Datta, Ms and Dr. Ian Fletcher, International Paint LLC.
The authors describe the genesis and performance of a step-change epoxy coating for h...
|
|
from D+D In Depth, December 2017 ; by PAUL ANDERSON, FLOWCRETE AMERICAS
When choosing a decorative finish, there are many factors that could affect a floor’s...
|
|
from JPCL, October 2017 ; by Michael O. Woodward, Carboline Company
Surrounded by high-rise buildings and crossing the Miami River, the Miami Avenue Brid...
|
|
from JPCL, July 2017
|
|
from D+D In Depth, March 2017 ; by MARC HIRSCH, M&M HIRSCH & ASSOCIATES LLC
Acrylic resins provide a number of performance properties to coatings that make them ...
|
|
from D+D In Depth, March 2017 ; by REBEKAH WILSON, PH.D.; BROOKE DIVAN, M.SC.; AND KATHRYN GUY, PH.D., U.S. ARMY CORPS OF ENGINEERS
Can the application of exterior coatings be a simple and inexpensive way to reduce he...
|
|
from JPCL, February 2017
|
|
from JPCL, February 2017 ; by Cynthia O’Malley, PCS, KTA-Tator, Inc.
|
|
from JPCL, January 2017 ; by Yong Zhang, Olin Epoxy, Olin Corporation
The author discusses formulation of low-VOC and high-volume-solids coatings with impr...
|
|
from D+D In Depth, January 2017 ; by Joe Schmit, Tnemec Company Inc.
It is important to understand what happens below the concrete surface when a resinous...
|
|
from JPCL, December 2016 ; by Peter Kronborg Nielsen, FORCE Technology
Following an uncertain start, the present offshore coatings systems for wind farms ha...
|
|
from D+D In Depth, November 2016 ; by Jayson L. Helsel, P.E., KTA-Tator Inc.
Intumescent coatings have unique properties and challenges that must be considered be...
|
|
from JPCL, September 2016
What causes bubbling or cratering of an epoxy intermediate coat when applied over an ...
|
|
from JPCL, July 2016 ; by James McCarthy, PPG Protective and Marine Coatings
|
|
from JPCL, February 2016 ; by Bruce J. Wiskel, P.E., Pacific Gas & Electric Company; and J. Peter Ault, P.E., Elzly Technology Corporation
The authors discuss the challenges of applying coatings to transmission pipeline when...
|
|
from JPCL, November 2015 ; by E. Bud Senkowski, P.E., P.C.S., KTA-Tator, Inc.
This article describes the coating materials, surface preparation requirements and ap...
|
|
from JPCL, August 2015 ; by Maria Betti, GATX Corporation
This article describes basic coating types, trends and processes for railcar interior...
|
|
from JPCL, July 2015 ; by Dwight G. Weldon, Weldon Laboratories, Inc.
|
|
from JPCL, June 2015
What is the best method for preparing newly galvanized steel to be overcoated with an...
|
|
from JPCL, April 2015 ; by Marcelo Rufo, Air Products and Chemicals, Inc.
This article discusses formulation and curing agent options for epoxies that allow fo...
|
|
from D+D Print, April 2015 ; by Allen Zielnik, Atlas Material Testing Technology LLC
Select the right coating for the best performance in tough service environments.
|
|
from JPCL, January 2015
How do you gauge the remaining service life of an aging fusion-bonded epoxy (FBE)
sy...
|
|
from D+D Print, January 2015 ; by Michael R. Van De Mark, Ameya Natu and Sagar Gade, Missouri S&T Coatings Institute, Missouri University of Science and Technology
Understanding environmental, regulatory and performance issues is key to successful c...
|
|
from JPCL, February 2014 ; by Daniel Totev, Air Products and Chemicals Europe B.V., and Marcelo Rufo, Air Products Brasil Ltda.
This article reviews the basics of high-solids epoxy coatings compared to conventiona...
|
|
from D+D Print, January 2014 ; by Sagar V. Gade and Dr. Michael R. Van De Mark, Missouri S&T Coatings Institute
Here’s the chemistry behind the new breed of epoxies that can be applied to concrete ...
|
|
from JPCL, September 2013 ; by Dr. Daniel J. Weinmann, Momentive Specialty Chemicals Inc.
This article provides an overview of the chemistry and properties of conventional epo...
|
|
from D+D Print, January/February 2013 ; by Jen Kramer, Editor in Chief, Durability + Design
When the Frick Car and Carriage Museum replaced its oil-stained epoxy floor with a sy...
|
|
from D+D Online Features, D+D February 2013 2013 ; by Jen Kramer
Once the copper-lined coffin was secure in the grave, and the pallbearers, including ...
|
|
from JPCL, January 2012 ; by Eric S. Kline, KTA-Tator, Inc., Richard A. Burgess, Series Technical Editor
|
|
from JPCL, January 2012 ; by Mike Rooney, Contract Resources Pty Ltd
|
|
from D+D Online Features, December 2011
A convergence of the practical and esoteric is written in concrete at a remote Navajo...
|
|
from JPCL, April 2011 ; by Cynthia L. O’Malley, Scott Christensen, and Gina Neilson
|
|
from JPCL, August 2010
|
|
from D+D Online Features, August 2010 ; by Daniel J. Weinmann
Consumer concerns and current trends in regulation make it clear: environmental compl...
|
|
from JPCL, March 2010
|
|
from JPCL, January 2010 ; by Valerie Sherbondy, Senior Chemist, KTA-Tator, Inc., and Richard Burgess, KTA-Tator, Inc., Series Editor
Maintenance takes drawbridge from bad to worse
|
|
from JPCL, January 2010 ; by Casey Ball, The Sherwin-Williams Company
|
|
from JPCL, December 2009 ; by Rick A. Huntley, Senior Coatings Consultant, KTA-Tator, Inc.; Richard Burgess, KTA-Tator, Inc., Series Editor
The Case of the Failing Floor Coating
|
|
from JPCL, December 2009 ; by Daryl Fleming, Assistant Editor, JPCL
|
|
from JPCL, November 2009 ; by Paul Vinik, MSChE, P.E., Florida Department of Transportation and Richard A. Burgess, B.S. , M.S., KTA-Tator, Inc.
|
|
from JPCL, November 2009 ; by Andreas W. Momber, Ph.D., Muehlhan AG; Peter Plagemann, Ph.D., and Volkmar Stenzel, Ph.D., Fraunhofer Institute for Manufacturing and Applied Materials Research; and Michael Schneider, Ph.D., Fraunhofer Institute for Ceramic Technologies and Systems
In Part 3 of a three-part series, the authors report on corrosive stress on offshore ...
|
|
from JPCL, September 2009
|
|
from JPCL, August 2009 ; by Michael Donkin, International Paint Ltd.
Massive changes have occurred in coating formulation for the heavy-duty market in the...
|
|
from JPCL, August 2009 ; by Harold Hower, Technology Publishing/PaintSquare
The past 25 years will likely be seen as the Golden Age of information technology, wh...
|
|
from JPCL, June 2009 ; by Cynthia L. O'Malley, KTA-Tator, Inc.; Richard Burgess, KTA-Tator, Inc. Series Editor
Anticipating the Service Environment for Proper Coating System Selection
|
|
from JPCL, May 2009
A high-quality epoxy phenolic lining failed after only five years inside a deminerali...
|
|
from JPCL, May 2009 ; by Dr. Mike O'Donoghue and Vijay Datta, MS, Devoe High Performance Coatings, International Paint LLC
A snapshot of advances in the tactical approach to VOC reduction in the world of indu...
|
|
from JPCL, April 2009 ; by Timothy Race, Kaked LLC
This article gives an overview of steel piling and its uses; reasons for coating it; ...
|
|
from JPCL, April 2009 ; by Peter P. Bock and Michael F. MeLampy, Hi-Temp Coatings Technology
The authors describe several issues associated with coatings under insulation, typica...
|
|
from JPCL, April 2009 ; by Andreas W. Momber, Ph.D., Muehlhan AG; Peter Plagemann, Ph.D., and Volkmar Stenzel, Ph.D., Fraunhofer Institute for Manufacturing and Applied Materials Research; and Michael Schneider, Ph.D., Fraunhofer Institute for Ceramic Technologies and Systems
In Part 2 of a three-part series, the authors report on testing the coating performan...
|
|
from JAC, March/April 2009 ; by Bob Brenk, Aldo Products Company Inc.
Restoration with reflective coatings serves multiple objectives, including enhanced e...
|
|
from JPCL, March 2009
|
|
from JAC, March/April 2009
|
|
from JAC, March/April 2009
A sampling of materials that offer an expanding array of choices to boost the appeara...
|
|
from JAC, December 2008
|
|
from JAC, March/April 2008 ; by Allen Zielnik, Atlas Material Testing Technology, LLC
An array of water-repellent and waterproofing measures are enlisted in the never-endi...
|
|
from JAC, January/February 2008 ; by Jayson L. Helsel, P.E.
With stucco, chemistry, attention to surface preparation hold key to formulating effe...
|
|
from JAC, December 2007 ; by Joe Maty, Editor, JAC
To accompany this issue’s Buying and Specifying Guide, we present this review of the ...
|
|
from JAC, August/September 2007 ; by Allen Zielnik, Atlas Materials Testing Technology LLC
Building design and construction underwent a fundamental shift in the first half of t...
|
|
from JAC, January/February 2007
A connection to the natural world and its elements figures prominently in PPG Industr...
|
|
from JAC, June/July 2006 ; by Joe Maty, JAC Editor
At the Cornwall iron furnace, which traces its origins to the American Revolution, th...
|
|
from JAC, June/July 2006 ; by Nicholas Wood, Degussa-Tego Coating & Ink Additives
The resin chemistry known as polysiloxanes has created coatings that offer an enviabl...
|
|
from JAC, June/July 2006 ; by Chris J. Marshall, Bayer MaterialScience LLC
Hybrid Polyurethane thick-film coatings for metal roofs deliver an impressive package...
|
|
from JAC, April/May 2006 ; by Ian Rowell, International Paint LLC
The use of intumescent coatings is gaining momentum, fueled by heightened fire-protec...
|
|
from JAC, Feburary/March 2006
The new convention center in Ocean Shores, WA, required coatings materials that would...
|
|
from JAC, Feburary/March 2006 ; by Dr. Michael Van De Mark, UMR Coatings Institute
Coatings based on epoxy resins serve important roles as high-performance products. Ad...
|
|
from JAC, January 2006 ; by Jayson Helsel
Sealing or coating concrete and masonry surfaces can significantly extend their usefu...
|
|
from JAC, October 2005 ; by Joe Maty
Several notable historic preservation and restoration projects are reviewed in this S...
|
|
from JAC, October 2005 ; by Walter Scarborough and Joe Maty
Coatings play an important role in creating and maintaining specialized environments ...
|
|
from JAC, July 2005 ; by Peter Brown and Andrew Wilson
This review explores current directions in school planning and design and examines im...
|
|
from JAC, April 2005 ; by John Williams
The author describes how to select coating systems for various exposure environments ...
|
|