Click to Purchase and Download this Standard or Test Method
Revision Date: June 16, 2011
Updated On: June 28, 2011
Editorial Change:
This specification defines standard environment for normal conditioning and testing of paint, varnish, lacquer, and related coating materials. Conditioning and testing of such materials shall be carried out in an atmosphere having room temperature and relative humidity within the limits of the standard specification. Moreover, the standard room or cabinet for conditioning and testing shall be well-ventilated and free of drafts, dusts, combustion products, and laboratory fumes. Conditioning, routine, and referee testing, shall be done in accordance with the specification.
Trailer or skid mounted blast and recovery equipment. Systems designed for maximum versatility, environmental compliance and overall cost savings. Call 1-800-634-7278
Novatek Corporation,
Dustless Coatings Removal
Strip, clean and profile all dust free!
Comply with new lead standards.
Contact today: (866) 563-7800
www.Novatekco.com
Sandblast additive delivered to jobsite pre-blended to eliminate hazardous abrasive wastes. Why mix, meter or apply at the job-site? Blast with ease and Let your painters paint!
1(800)-252-7869
HT 365 is a preservation, single component, anti-corrosive coating, a water displacing agent, a lubricant, and a penetrating fluid. It creates an imperceptible thin-film coating that offers excellent salt contaminant and humidity
protection.
Contact your HoldTight® representative or visit
Holdtight.com for more information.
Mesh-free passive fire protection epoxy designed to protect against hydrocarbon pool fire scenarios for up to four hours as defined in the ANSI/UL1709 standard.
Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233
