COMMERCIAL COATINGS PREVIOUS QUIZZES


THURSDAY, AUGUST 13, 2020
True or false: The National Fire Prevention Association recently updated a technical report on calculating fire resistance of wood members and assemblies.

WEDNESDAY, AUGUST 12, 2020
In addition to carbon steel, what other metals are covered by an SSPC blast-cleaning standard?

TUESDAY, AUGUST 11, 2020
True or False: Methyl methacrylate resin-based floor coatings can be installed in the temperature range of 90 degrees Fahrenheit down to 30 degrees.

MONDAY, AUGUST 10, 2020
True or false: The American Institute of Architects recently supported a proposed Executive Order mandating classical architecture for federal properties.

FRIDAY, AUGUST 7, 2020
What is another name for mineral paint?

THURSDAY, AUGUST 6, 2020
True or false: The New York Times building has an intumescent coating on its structural steel exterior.

WEDNESDAY, AUGUST 5, 2020
True or false: Studies have shown that preparing a weathered TPO roof for coating with an aqueous cleaner followed by power washing increases the adhesion of the coating dramatically.

TUESDAY, AUGUST 4, 2020
True or false: An alkyd coating is a complex polyester.

MONDAY, AUGUST 3, 2020
Working at what height invokes OSHA's Construction Industry Fall Protection Standard?

FRIDAY, JULY 31, 2020
True or false: An article on floor coatings recommended use of a specially formulated polyurethane primer to combat high alkalinity at the surface of a concrete slab.

THURSDAY, JULY 30, 2020
True or false: The name of the test instrument used to determine a coating’s resistance to fading through accelerated exposure to light is Light-Resistance Chamber.

WEDNESDAY, JULY 29, 2020
True or false: A D+D article on assuring the quality of coating work on commercial buildings argues for spot inspections of each phase of cleaning, painting and paint-related work rather than having an inspector present continuously to monitor all phases of coating work.

TUESDAY, JULY 28, 2020
True or false: According to some industry experts, atmospheric exposures that can contribute to amine blush include UV, carbon dioxide and moisture.

MONDAY, JULY 27, 2020
True or false: Instruments based on radio frequency can be used to test for moisture in concrete or masonry walls.

FRIDAY, JULY 24, 2020
True or false: Coatings can be a source of elevated exposure to crystalline silica.

THURSDAY, JULY 23, 2020
What organization validates the performance test results published by manufacturers of repellents?

WEDNESDAY, JULY 22, 2020
True or false: Granules are commonly used on SPF roofing together with coating materials.

TUESDAY, JULY 21, 2020
True or false: An alkyd is a modified form of an acrylic resin.

MONDAY, JULY 20, 2020
What are the three most commonly specified coating types used over spray foam roofing?

FRIDAY, JULY 17, 2020
After what amount of time in outdoor exposure does new western red cedar wood require special surface preparation measures prior to painting?

THURSDAY, JULY 16, 2020
What type of pigments possess colorant value and hiding power?

WEDNESDAY, JULY 15, 2020
True or false: Marmorino is recommended for humid environments such as bathrooms.

TUESDAY, JULY 14, 2020
What is the main feature of zinc that allows it to provide cathodic protection to steel?

MONDAY, JULY 13, 2020
True or false: There are four ways that abrasive and water can be combined in a wet abrasive blast system.

FRIDAY, JULY 10, 2020
What is the name of the surface engineering network in Canada that is looking into antiviral metallic and ceramic coatings as a way to slow the transmission of COVID-19?

THURSDAY, JULY 9, 2020
True or false: ASTM has developed a method for measuring and replicating concrete surface profile using replica putty.

WEDNESDAY, JULY 8, 2020
True or false: The anhydrous calcium chloride test from ASTM covers the quantitative determination of the rate of moisture vapor emitted from below-grade, on-grade and above-grade (suspended) bare concrete floors.

TUESDAY, JULY 7, 2020
True or false: Sprayed fire-resistive materials are intumescent coatings.

MONDAY, JULY 6, 2020
True or false: Wet storage stain should be removed from galvanizing before coatings are applied.

THURSDAY, JULY 2, 2020
True or false: The calcium chloride test and the plastic sheet method are both qualitative methods for determining levels of moisture in concrete floor slabs.

WEDNESDAY, JULY 1, 2020
True or false: Efflorescence can move through permeable paint films on masonry substrates.

TUESDAY, JUNE 30, 2020
True or false: HUD publishes fire resistance ratings of archaic building materials.

MONDAY, JUNE 29, 2020
What color system or standard relies on instrumental measurement?

FRIDAY, JUNE 26, 2020
True or false: Siloxane sealers applied to concrete often have no measurable film thickness.

THURSDAY, JUNE 25, 2020
True or false: The water resistance of coatings is tested with a condensing humidity cabinet.

WEDNESDAY, JUNE 24, 2020
True or false: According to the AIA, a sustainability consultant can be an architect or a non-architect.

TUESDAY, JUNE 23, 2020
True or false: Prime pigments have lower refractive indexes than extender pigments.

MONDAY, JUNE 22, 2020
In what region are scientists developing anti-viral surface coatings to combat COVID-19?

FRIDAY, JUNE 19, 2020
What is the subject of a recent NASA grant for the study of concrete?

THURSDAY, JUNE 18, 2020
True or false: According to a JPCL article, the 28-day-cure-time rule of thumb for coating concrete has substantial scientific and engineering basis.

WEDNESDAY, JUNE 17, 2020
True or false: Methyl methacrylate (MMA) resinous flooring systems should not be applied at temperatures below 40 F.

TUESDAY, JUNE 16, 2020
What is the difference between resistance requirements of a vapor barrier and an air barrier?

MONDAY, JUNE 15, 2020
True or false: Micaceous iron oxide pigment improves the barrier properties of a coating.

FRIDAY, JUNE 12, 2020
What are AIM coatings?

THURSDAY, JUNE 11, 2020
True or false: The term “guard” is used to describe a product in anodizing work.

WEDNESDAY, JUNE 10, 2020
True or false: The lesser the permeability of a coating on concrete, the more effectively it will perform.

TUESDAY, JUNE 9, 2020
Bisphenol A is combined with which of the following to produce epoxy resins?

MONDAY, JUNE 8, 2020
True or false: Slip resistance of wood-floor finishes is influenced most by the gloss level of the finish material.

FRIDAY, JUNE 5, 2020
True or false: Cratering can be caused by foreign matter in or on a wet coating film.

THURSDAY, JUNE 4, 2020
True or false: Reflectance and heat resistance are not the two main properties of cool roof coatings.


Today's Quiz

Advertisements
 
DeFelsko Corporation

 
KTA-Tator, Inc. - Corporate Office

 
WEFTEC Show

 
Tarps manufacturing, Inc.

 
Sauereisen, Inc.

 
SAFE Systems, Inc.

 
 
 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@paintsquare.com


The Technology Publishing Network

PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy Policy   |   Terms & Conditions   |   Support   |   Site Map   |   Search   |   Contact Us