Contractors Wanted for CA Community Park Reno
The City of Palmdale is soliciting bids for phase two construction, renovations and additions to a community park in Palmdale, California.
The submittal date for this project is Dec. 14.
Scope of Work
This project involves painting and site work at Sam Yellen Park in Palmdale, California.
Exterior work involves a three-coat system of epoxy and a three-coat system of epoxy and urethane on steel, concrete and masonry substrates. Three-coat systems of epoxy, latex and urethane will be required on fiber-cement board substrates. Two- and three-coat systems of epoxy, zinc and urethane will be required on specified steel substrates. Three-coat systems of vinyl, epoxy and urethane will be required on galvanized metal, copper and aluminum substrates.
Interior work is scheduled to include a three-coat system of latex on steel, galvanized metal and gypsum board surfaces. Three-coat systems of epoxy and urethane are required on concrete and masonry surfaces. A three-coat system of epoxy is required on fiber-cement board surfaces.
Surfaces must be cleaned and prepared in accordance with standards for Solvent Cleaning (SSPC-SP 1), White Metal Blast Cleaning (SSPC-SP 5/NACE No. 1), Commercial Blast Cleaning (SSPC-SP 6/NACE No. 3), Brush-Off Blast Cleaning (SSPC-SP 7/NACE No. 4), Near-White Metal Blast Cleaning (SSPC-SP 10/NACE No. 2) and Bare Metal Power Tool Cleaning (SSPC-SP 11).
The owner-specified manufacturers for this project are Benjamin Moore, Dunn-Edwards, Glidden, PPG, Sherwin-Williams and Vista Paint.