Contractor Sought for TX Water Tank Rehab
Prairie View A&M University is seeking contractors for the rehabilitation of a ground storage tank in Prairie View, Texas.
Bids are due Oct. 9.
Scope of Work
This project involves repairing and recoating the interior and exterior surfaces of an existing 1 million-gallon ground water storage tank.
Contractors will abrasive blast-clean wet interior tank surfaces to Near White standards (SSPC-SP 10/NACE No. 2). Dry interior tank surfaces will be abrasive blast-cleaned to Commercial standards (SSPC-SP 6/NACE No. 3). The interior surfaces will then be coated with a zinc-rich primer and two-coat epoxy system.
Exterior tank surfaces will be abrasive blast-cleaned to Commercial standards (SSPC-SP 6/NACE No.3) and coated with a zinc-rich primer, epoxy intermediate, polyurethane intermediate and fluoropolymer finish.
A containment system and dehumidification are required.
The owner-approved coating manufacturer is Tnemec or an approved equal.
Reported by Paint BidTracker, a construction reporting service devoted to identifying contracting opportunities for the coatings community. Try PaintBidTracker free!