 |
|
PaintSquare Daily News is available in three editions: Industrial Only Commercial Only Combined Industrial & Commercial Your free subscription also includes: Special topical editions and Weekend Brief—a recap of the week’s top news and some great in-depth reads. Subscribe now: paintsquare.com/psdn |
1MG Tank Up for Recoat in NC
The City of Goldsboro is seeking contractors for recoating the Center and Holly Street Tank, located in Goldsboro, North Carolina.
A mandatory pre-bid meeting will be held Jan. 31.
Bids are due Feb. 5.
Scope of Work
This project involves cleaning and recoating the interior and exterior surfaces of the existing 1 million-gallon elevated water storage tank.
Contractors will oversee abrasive blast-cleaning to Near White (SSPC-SP 10) of interior steel surfaces. The interior will then be coated with a zinc-rich urethane primer and three-coat epoxy system. Interior piping within the valve vaults, and the exterior of the valve vault will be coated as well.
Exterior steel surfaces will be abrasive blast-cleaned to Commercial standards (SSPC-SP 6). Exterior surfaces will receive a zinc-rich urethane primer, epoxy stripe coat, polyurethane intermediate coat and fluoropolymer topcoat.
The work also includes abrasive blast-cleaning and coating concrete footing surfaces with an epoxy concrete sealer.
The only approved manufacturer for all surfaces is Tnemec.
Containment is required. Lead-based paint may be present at the top of the base finial section.
Reported by Paint BidTracker, a construction reporting service devoted to identifying contracting opportunities for the coatings community. Try PaintBidTracker free!
