DTM Polyaspartic Made for Shop or Field

WEDNESDAY, MARCH 1, 2017


US Coatings has released new polyaspartic finish UreGrip 3360 DTM, a product the manufacturer says can serve as a one-coat alternative to epoxy and polyurethane systems.

Modern Safety Techniques
Rapid Prep, LLC

The company says that the product’s durability and fast dry times are prime for those who would use it as a topcoat or for those who would like to lower their shops’ VOC and HAP outputs.

NLB Corporation
TMI Coatings, Inc.
US Coatings
The company said in a press release that the product’s durability and fast dry times are prime for those who would use it as a topcoat or for those who would like to lower their shops’ VOC and HAP outputs.
US Coatings

The company said in a press release that the product’s durability and fast dry times are prime for those who would use it as a topcoat or for those who would like to lower their shops’ VOC and HAP outputs.

Just Like New Overspray Management
Seymour Midwest

The tintable UreGrip 3360 has a two-hour pot life and a dry-to-handle time of two to four hours, allowing for same day turn-around, the company says, adding that the product provides a range of gloss options and corrosion resistance. The company also says the product can be applied as thick as 10-12 mils dry film thickness or as thin as 1.5-3 mils.

Quikspray, Inc.
Tarps manufacturing, Inc.

For more information visit www.uscoatings.com.

Tagged categories: Coating chemistry; Coating Materials; Coating Materials; Coating selection; Coating types; Coatings; Coatings Technology; Epoxy; Polyurethane; Weathering


Comments

Join the Conversation:

Sign in to add your comments.