Free Webinar Focuses on Vapor Blasting
Using water to suppress airborne dust during abrasive blasting can achieve the same power as dry blasting, according to an upcoming webinar.
The results of using a blasting method that adds water to the pressure pot will be covered in "Differences Between Traditional Sandblasting and Vapor Abrasive Blasting," a free upcoming JPCL/SSPC webinar to be held from 11 a.m. to noon ET April 8.
The webinar will be presented by Bill Eliason, a sales manager for Graco and founder of EcoQuip Inc.
The webinar is part of the 2015 JPCL/SSPC Webinar Education Series.
What You'll Learn
This webinar will discuss the differences between vapor abrasive blasting technology and dry-blasting, slurry-blasting and traditional water-based blasting methods.
Attendees will learn the science behind vapor abrasive blasting and which types of applications are better suited for this method.
This webinar is sponsored by Graco.
About the Presenter
Bill Eliason is a NACE Level II Certified Coatings Inspector and the founder of EcoQuip Inc., which was acquired by Graco in December 2013.
He is currently the North American Sales Manager for the Graco EcoQuip Vapor Abrasive Blast Equipment product line.
Free Webcasts Available
Numerous free webcasts in the JPCL/SSPC Education Series, covering a wide range of topics, are now available at www.paintsquare.com/webinars.
Those presentations include:
A complete listing of PaintSquare's archived and future webinars is available here.