Concrete Gets 12-Hour Recoat Option

WEDNESDAY, APRIL 1, 2015


A new heavy-duty concrete floor coating system is designed to deliver a highly durable, abrasion-resistant surface—from initial cleaning to walk-on—in one day.

Watco, maker of industrial-strength flooring products, has introduced Fastcoat, a prep-and-paint system that employs a rapid-cure polyaspartic resin technology.

The system consists of:

  • Fastcoat Wipes, a solvent-impregnated cleaning wipe designed to quickly remove dirt and grease, leaving the surface ready for priming;
  • Concrete Fine Filler, to repair minor imperfections;
  • Fastcoat Primer, a high-adhesive, two-part, rapid-drying product that touch-dries in minutes; and
  • Fastcoat Paint, available in light gray, mid-gray, mid-blue, mid-green and tile red.

The two-part paint is also available in an anti-slip formulation and requires only two hours of drying between coats, according to Watco.

Fastcoat

The coating system can have a floor ready for traffic in 12 hours, Watco says.

Watco notes that application times may vary depending on coverage and temperature.

Applications

The manufacturer recommends the system for production areas, warehouses, showrooms, workshops and other interior or exterior heavily used areas.

Established in 1927, UK-based Watco provides a wide range of epoxy resin coatings, concrete repair materials and anti-slip products for floors, steps and ramps.

More information: www.watco.co.uk.

   

Tagged categories: Coating Materials; Commercial Buildings; Concrete defects; Concrete floor coatings; EMEA (Europe, Middle East and Africa); Floors; North America; Primers; Protective Coatings; Watco

Join the Conversation:

Sign in to our community to add your comments.