Employers Face PPE Rule Updates


Updating its requirements to align with other current safety standards, federal officials are proposing revisions to their eye and face protection rule.

The Occupational Safety and Health Administration has issued a proposed rule to bring the federal requirements in line with the American National Standards Institute’s eye and face protection standard, ANSI/ISEA Z87.1-2010.

OSHA published the notice of proposed rulemaking Friday (March 13) in the Federal Register.

Who is Affected

The proposal would affect OSHA’s eye and face protection standards for:

OSHA says thousands of people are blinded each year from work-related eye injuries that could have been prevented with proper selection and use of eye and face protection.

Eye injuries alone cost more than $300 million per year in lost production time, medical expenses and worker compensation, OSHA notes.

Hazard-Specific Focus

The proposal involves replacing dated references and other changes to reflect the requirements of the newer consensus standard.

offshore engineer
©iStock.com / 36clicks

Shipyard workers are among those who would be affected by the proposed rule. The public is invited to comment until April 13.

For example, the latest ANSI standard for eye and face protection “focuses on a hazard, such as a droplet and splash, impact, optical radiation, dust, fine dust, and mist and specifies the type of equipment needed to protect from that hazard,” according to the notice.

Earlier versions focused on protector type, such as spectacles, goggles or face shields.

The proposal also revises language in OSHA’s construction rule to make it more consistent with general industry and maritime standards.

Public comments on the proposed rule are due April 13. Individuals may submit comments electronically at www.regulations.gov (the federal eRulemaking Portal) by mail or fax.


Tagged categories: ANSI; Certifications and standards; Construction; Good Technical Practice; Health and safety; Marine; North America; OSHA; Shipyards

Join the Conversation:

Sign in to our community to add your comments.