Densifier Fills, Hardens in 1 Step

MONDAY, SEPTEMBER 15, 2014


In2Crete has updated its Ecoguard Pore Filler, offering a green approach to filling and hardening surface depressions and hairline cracks in one step.

The reformulated surface grout and densifier creates no vapors and uses ground cement to create a smooth surface fill, according to the company.

Pore Filler is a water-based proprietary blend of silicates and thermally cured resin that can be blended from 1:3 to 1:9 with clean, potable water based on the hardness and porosity of the concrete matrix. The compound is designed to fill cracks up to 5mm in depth and width, holes and scratches, as well as harden the surface all in one step.

The resulting floor surface is “void of small pores and depressions” while “surface tension is greatly increased to provide a high gloss finish” that reduces overall wear to the floor.

The compound can also be color matched using In2Crete's Color Infusion system to match and blend in with floor colors.

The quick-drying formula leaves the surface smooth, abrasion resistant and ready to polish, the company says.

More information: http://www.ecoguard.com/.

   

Tagged categories: Cement; Coating Materials; Concrete coatings and treatments; Concrete resurfacing systems; Densifiers; Floors; Green chemistry; Green coatings; In2Crete; North America

Join the Conversation:

Sign in to our community to add your comments.