Coatings Industry News

Main News Page

Contractors Sought for $1.5M Tank Recoat

Tuesday, September 26, 2017

Comment | More

The City of Bellmead is seeking contractors for the rehabilitation of five ground storage tanks and one elevated storage tank located in Waco, Texas. Engineers estimate that the project will cost $1,450,000.

Bellmead Barlow ground storage tank
CIty of Bellmead

The Bellmead Barlow ground storage tank is part of a rehab contract out for bid in Bellmead, Texas, near Waco.

A pre-bid meeting will be held Sept. 27. Bids are due Oct. 17.

Scope of Work

The project involves cleaning and recoating three 500,000-gallon ground storage tanks, two 750,000-gallon ground storage tanks and one 100,000-gallon elevated storage tank located at four water plants.

All interior surfaces (excluding Parish GST #2) will be abrasive blast-cleaned to Commercial standards (SSPC-SP 6). When soluble salt limits are below contractor limits, dehumidification equipment will be required and surfaces should be abrasive blast-cleaned to a Near-White finish (SSPC-SP 10). If necessary, any deep pits left in the tank(s) will be repaired by welding and the shallow pits will be repaired with a 100 percent solids epoxy paste, after zinc-rich primer is applied.

Once the interior surfaces are properly cleaned and prepped, a zinc-rich primer will be applied, followed by a thin stripe coat, and a polyamide epoxy finish.

For the preparation of the tanks’ exterior, surfaces will first be pressure washed with a 10 percent TSP solution followed by a water-only pressure wash. Any remaining rusted areas will be power-tool cleaned to SSPC-SP11 standard or spot blast-cleaned to a Commercial finish (SSPC-SP 6). All exterior steel, such as vents, hatches, steel retaining rings and exposed yard piping, will be abrasive blast-cleaned to a Commercial finish (SSPC-SP 6). Meyers GST will have complete coating removal and coating application performed under full containment.

After exterior surface preparation is completed, tanks will be given a two-coat acrylic system. When recoating the Meyers GST and exterior steel, surfaces will receive a four-coat zinc and acrylic system.

Work is expected to be completed within 335 days after contract commencement.

Owner-approved brands include Tnemec, Sherwin-Williams and Induron.

Reported by Paint BidTracker, a construction reporting service devoted to identifying contracting opportunities for the coatings community. Try PaintBidTracker free!


Tagged categories: contract painting leads; Contracts; Government contracts; NA; North America; Paint BidTracker; potable water; Program/Project Management; Water Tanks

Comment Join the Conversation:

Sign in to our community to add your comments.

Abrasives Inc.

EDCO - Equipment Development Co. Inc.


Strand’s Industrial Coatings

KTA-Tator, Inc. - Corporate Office

HoldTight Solutions Inc.

Sauereisen, Inc.

Axxiom Manufacturing

Tarps manufacturing, Inc.


Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL

The Technology Publishing Network

PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About   |   Privacy Policy   |   Terms & Conditions   |   Support   |   Site Map   |   Search   |   Contact Us