PaintSquare.com
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 

Advertisement

Sherwin-Williams


Coatings Industry News

Main News Page


Epoxy Siloxane Made for Gloss, Protection

Wednesday, June 28, 2017

Comment | More

A new finish coat from Induron Protective Coatings (Birmingham, Alabama) is made to exhibit both corrosion protection and color and gloss retention without concerns about volatile organic compounds or isocyanates.

indurlux 9400
Induron

Indurlux 9400 is a high-solids, two-component epoxy siloxane made for interior or exterior surface applications.

Indurlux 9400 is a high-solids, two-component epoxy siloxane made for interior or exterior surface applications, Induron says. The low-VOC formula is free of hazardous air pollutants, according to the company.

Product Recommendations

The new coating is compatible with most epoxies, alkyds and acrylics, the company says, and provides a high-gloss finish with complete color flexibility. Induron recommends the coating for applications including water storage tanks and treatment facilities, fire hydrants, structural steel, amusement parks, railcars and land drilling rigs.

The product is not recommended for immersion service or applications where strong acids, alkalis or solvents are likely to be splashed or spilled.

Indurlux 9400 can be applied via airless spray, conventional spray, brush or roller, and has a pot life of four hours at 70 degrees Fahrenheit. The coating is made to be applied at 2.7 to 5.3 mils wet film thickness, and dries to 2.5 to 5.0 mils dry film thickness.

More information: www.induron.com.

   

Tagged categories: Corrosion protection; Epoxy; Induron Coatings; Siloxane

Comment Join the Conversation:

Sign in to our community to add your comments.

Advertisements
 
BASF
 
New resins from BASF will have metals loving water!
 
Excellent corrosion resistance, low VOC, high gloss, thin films www.basf.us/industrialcoatings dpsolutions@basf.com 800-231-7868
 

 
Mitsubishi Gas Chemical America
 
Performance Amine 1,3-BAC
 
A highly reactive cycloaliphatic diamine offering superior performance. Reasonable cost and curing efficacy makes it suitable for all types of epoxy resin applications.
 

 
SABRE Autonomous Solutions
 
The system provides a finish even experienced blasters cannot match
 
You will be amazed at the accuracy, speed and control of the system.
 

 
Tarps manufacturing, Inc.
 
QUALITY MADE IN AMERICA —Available near you!
 
CLICK to get a behind-the-scenes look at how Tarps Manufacturing makes the highest-quality tarps right here in the USA — available nationwide.
 

 
HoldTight Solutions Inc.
 
Clean surfaces simply don’t rust, and no other product cleans like HoldTight®102.
 
HoldTight®102 is a wet blasting additive that decreases the water’s surface tension, allowing it to get into the profile of the surface and remove ALL contamination, including salts, acids, abrasives, light oils, and greases. HoldTight®102 leaves behind no film and evaporates with the water, providing a surface that is thoroughly clean and ready for coating, rust-free for up to 72 hours.
 

 
Sauereisen, Inc.
 
Corrosion Resistant Materials for the Wastewater Industry
 
33+ years of successful installations

sauereisen.com
 

 
ARC / A.W. Chesterton Company
 
Rapid Curing Coating
 
Cures under adverse conditions with maximum adhesion
 

 
Jotun Paints Inc.
 
Jotun Jotachar 1709
 
Mesh-free passive fire protection epoxy designed to protect against hydrocarbon pool fire scenarios for up to four hours as defined in the ANSI/UL1709 standard.
 

 
Carboline Company
 
New product: Carbozinc® 608 HB
 
Introducing a new high build zinc-rich primer that can save you time and money by eliminating the epoxy intermediate coat!
 

 
CHLOR*RID International Inc.
 
SOLUTIONS THAT WORK
 
Companies that invest in corrosion control use CHLOR RID products
  • Soluble salt removal liquid
  • Test kits to verify contamination levels
  • Surface passivation to hold the blast
INFO@CHLOR-RID.COM 800.422.3217
 

 
 
 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@paintsquare.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy Policy   |   Terms & Conditions   |   Support   |   Site Map   |   Search   |   Contact Us