Coatings Industry News

Main News Page

Climate Policy, Concrete Mix in Research

Wednesday, March 16, 2016

Comment | More

Researchers at the University of California, Los Angeles, hope to close the loop on carbon emissions and concrete.

The interdisciplinary team has been working on a technology to turn one of the largest sources of carbon dioxide, flue gas emitted from smokestacks at power plants, into a building material for buildings, roads and bridges.

Called CO2NCRETE—the product is fabricated using 3D printers, the university reported in a news announcement.

A Game-Changer

The development could be revolutionary for climate policy, according to J.R. DeShazo, professor of Public Policy at the UCLA Luskin School of Public Affairs and director of the UCLA Luskin Center for Innovation.

“This technology tackles global climate change, which is one of the biggest challenges that society faces now and will face over the next century,” said DeShazo.

UCLA admits that it is not the first to attempt to capture carbon emissions from power plants, but the challenge has been what to do with the CO2 once it’s captured.

“We hope to not only capture more gas,” DeShazo said, “but we’re going to take that gas and, instead of storing it, which is the current approach, we’re going to try to use it to create a new kind of building material that will replace cement.”

Going from Lab to Real-World

So far, the new construction material has only been produced only at a lab scale, using 3D printers to shape it into tiny cones, the university announced.

“We have proof of concept that we can do this,” DeShazo said.

“But we need to begin the process of increasing the volume of material and then think about how to pilot it commercially. It’s one thing to prove these technologies in the laboratory. It’s another to take them out into the field and see how they work under real-world conditions.”

Process and Scaling

Gaurav Sant, associate professor and Henry Samueli Fellow in Civil and Environmental Engineering, says the team can demonstrate a process taking lime and combining it with carbon dioxide to produce a cement-like material.

Screenshot via UCLA video

The team has produced a proof of concept for CO2NCRETE in the lab and are working on further developments.

“The big challenge we foresee with this is we’re not just trying to develop a building material. We’re trying to develop a process solution, an integrated technology which goes right from CO2 to a finished product,” Sant explains.

“3D printing has been done for some time in the biomedical world,” he added, “but when you do it in a biomedical setting, you’re interested in resolution. You’re interested in precision.

“In construction, all of these things are important but not at the same scale. There is a scale challenge, because rather than print something that’s 5 centimeters long, we want to be able to print a beam that’s 5 meters long. The size scalability is a really important part.”

The Road Ahead

The university also reports that getting stakeholders on board is another challenge to bringing the technology to market.

“This technology could change the economic incentives associated with these power plants in their operations and turn the smokestack flue gas into a resource countries can use, to build up their cities, extend their road systems,” DeShazo said.

“It takes what was a problem and turns it into a benefit in products and services that are going to be very much needed and valued in places like India and China.

“China is currently the largest greenhouse gas producer in the world, and India will soon be No. 2, surpassing [the U.S.].”

DeShazo has provided the public policy and economic guidance for the research. The scientific contributions have been led by Sant; Richard Kaner, distinguished professor in Chemistry and Biochemistry, and Materials Science and Engineering; Laurent Pilon, professor in Mechanical and Aerospace Engineering and Bioengineering; and Matthieu Bauchy, assistant professor in Civil and Environmental Engineering.


Tagged categories: Air pollution control; Building materials; Carbon dioxide; China; concrete; Emissions; Environmental Control; Environmental Protection; Good Technical Practice; Green chemistry; India; North America; Research and development

Comment from Michael Dwyer, (3/16/2016, 12:03 PM)

So they propose taking CO2 and reacting it with lime and this somehow reduces the amount of greenhouse has emitted. Given that Co2 is produced making quicklime this on the best day is carbon neutral (e.g. they are proposing to make limestone). Given the complexities of handling CO2 (energy intensive) suggests this is a dead end from a economic and perhaps energy standpoints

Comment from Tom Schwerdt, (3/17/2016, 8:42 AM)

What a piece of fluff and buzz. "We're gonna do blue sky cool stuff to HEL TEH WORLD!!!!1111" No technical information whatosever, except for reading off the whiteboard where (as noted by Michael) they somehow think that they are "capturing CO2" with lime and are unaware how lime is produced. CaCO3(limestone) + heat -> CaO (Lime) + CO2. Plus the excess CO2 produced by (typically) burning fossil fuels to produce the heat to crack the CO2 out of the lime in the first place. The apparent process will make CO2 in the atmosphere worse, not better. Oh, and a putty knife is a more effective way of removing overflow concrete from polymer molds, as well as less damaging to the mold than grinding at it with a flathead screwdriver. Even better, you could simply wipe it off while it's still liquid instead of letting it harden in place...

Comment from John Fauth, (3/18/2016, 8:32 AM)

Let's set aside the pretense that these environmental initiatives are actually intended to make a difference. The real objective is to make a few people feel good about themselves, not to save (or even change) the environment.

Comment Join the Conversation:

Sign in to our community to add your comments.

Sauereisen, Inc.

Paint BidTracker

Modern Safety Techniques

Tarps manufacturing, Inc.


NLB Corporation

Strand’s Industrial Coatings

HoldTight Solutions Inc.


Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL

The Technology Publishing Network

PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About   |   Privacy Policy   |   Terms & Conditions   |   Support   |   Site Map   |   Search   |   Contact Us