Coatings Industry News

Main News Page


Coating Made for Concrete Refill

Thursday, December 3, 2015

Comment | More

The Sherwin-Williams Company Protective & Marine Coatings division has introduced an epoxy-modified cementitious resurfacer that the company says patches and refills voids and bug holes in concrete and masonry substrates.

Dura-Plate 2300 provides a hard, durable surface with good adhesion, according to the company. The new product also minimizes pin-holing and outgassing problems sometimes associated with coating concrete.

The coating is suitable for resurfacing concrete prior to coating and lining applications for a range of environments, according to the company. Industrial applications include water and wastewater; oil and gas; pharmaceutical; bridge and highway; food and beverage; power generation; mining; sewer collection; atmospheric and immersion service; and secondary containment.

Coating Details

The company says the coating is abrasion-resistant and is part of a three-component kit that contains Portland cement, hydrophobic thixotropes, fiber reinforcement, graded silica sand and other aggregates. The kit consists of Part A Epoxy, Part B Hardener and Part C Mortar in a single package.

The Sherwin-Williams Company

Dura-Plate 2300 is an epoxy refill coating for concrete and masonry substrates and provides up to 1/2 inch per lift for multiple industrial applications, Sherwin-Williams says.

Sherwin-Williams says the product can be applied in a range of temperatures. When used at 75 degrees Fahrenheit, the Dura-Plate 2300 can be dry to the touch within 3 to 4 hours. It can be applied at a minimum of 40 degrees Fahrenheit, according to the company.

The coating also has an unlimited recoat window because it can be reagitated to reduce viscosity and improve workability time inside a 70-minute potlife, the company says.

The manufacturer says the Dura-Plate 2300 is available in a flat concrete gray; can be applied by a hand-trowel or spray; has a film build-up of up to ½ inch per lift; and can be top-coated within 8 to 24 hours depending on the top-coating type.

More information: www.sherwin-williams.com.

   

Tagged categories: Asia Pacific; Bridges; Coating Application; Concrete coatings and treatments; Concrete resurfacing systems; EMEA (Europe, Middle East and Africa); Epoxy; Latin America; Masonry coatings; non-potable water; North America; Oil and Gas; potable water; Power; Roads/Highways; Wastewater Plants

Comment Join the Conversation:

Sign in to our community to add your comments.


Advertisements
 
KTA-Tator, Inc. - Corporate Office

 
SAFE Systems, Inc.

 
Mitsubishi Gas Chemical America

 
Fischer Technology Inc.

 
WEFTEC Show

 
Sauereisen, Inc.

 
RCG America

 
ABKaelin, LLC

 
NLB Corporation

 
HoldTight Solutions Inc.

 
 
 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@paintsquare.com


The Technology Publishing Network

PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy Policy   |   Terms & Conditions   |   Support   |   Site Map   |   Search   |   Contact Us