Accelerated corrosion test methods: Can they be misleading?
BY Patrik Reuterswaerd and Johan Tidblad, Swerea Kimab, Sweden
Report predicts growth in the Middle East
Two major coatings manufacturers expand
How dry film thickness affects the mechanical properties of anticorrosive epoxy coatings
BY Vivian Farstad and Samuel Akogyeram, Jotun A/S
Case study: waterproofing a steel bridge deck
BY Dick Uebelhoer, Sika Services AG
Coming to terms
Passive fire protection with intumescent coatings
BY JPCL EUROPE Staff
Application of two-component epoxy intumescent coatings
BY Eric P. Rennerfeldt
New report examines the European market for pipes
Paint failures: how to take samples for analysis
BY Clare Till, PHD, Safinah U.K.
Bridge coating performance: two-coat vs. three-coat systems
BY Shameem A. Khan, Maryland State Highway Administration, U.S.
Hire the right person the first time
BY Warren Brand, Engineered Corrosion Solutions
Nontoxic barnacle antifouling
BY Brian Goldie, JPCL EUROPE
Smart setup: assembling & operating air abrasive blast equipment
BY Bill Corbett & Stan Liang, KTA-Tator, Inc.
Fighting corrosion on wind turbines
Q&A: Maintaining an oil refinery
Greetings from Dubai
BY Brian Goldie, Editor-in-Chief
Is ego hurting your company?
PSPC: analysis and review
BY Oliver White, Safinah Ltd.
Shipping goes greener with new program
BY Dan Mobbs, Assistant Editor
Coatings for atmospheric exposure
BY João Azevedo, Sherwin-Williams
Coming to America
The potential perils of tank lining
BY Dirk Uebeloer, Sika Services AG
Anticorrosive protection of offshore wind farm towers
BY Hugues Dedeurwaerder, Coatings Research Institute
Coating failures caused by lack of adhesion
BY Lee Wilson, Senior coating inspector & author
Getting subsea insulation inspection on course
High-solids epoxy systems for protective and marine coatings
BY Daniel Totev, Air Products and Chemicals Europe B.V., and Marcelo Rufo, Air Products Brasil LTDA
Understanding slip coefficient and tension creep testing of coatings used in slip-critical bolted connections
BY William D. Corbett, PCS, and Carly M. McGee, PCS, KTA-Tator, Inc.
An introduction to thermal spraying
BY Stuart Milton, Metallisation Ltd, UK
Pipeline field joints
BY Adam Wynne Hughes, Pipeline Induction Heat Ltd, UK
An overview of concrete protection
BY Warren Brand, Chicago Coatings Group, LLC
Hull coatings & fuel efficiency: recent developments
BY Brian Goldie & Dan Mobbs, JPCL Europe
Dust control: reducing the health risks associated with abrasive blasting
BY Jennifer Frakes
Understanding the basics of chemical-resistant polyesters & vinyl esters
BY Gary Hall, JPCL Contributing Editor
Formulating polyureas: history & advances
BY Kevin Buck, Huntsman
The role linings play in manhole rehabilitation
BY Kevin Morris, the Sherwin-Williams Company
Performance standard for protective coatings: time for a change?
BY Oliver White, Newcastle University, and Raouf Kattan, Safinah Ltd.
Waterborne acrylics for maintenance and protective coatings -- moving beyond light duty
BY Leo J. Procopio, The Dow Chemical Company
Reinforced storage tank linings -- advantages and applications
BY Matthew Fletcher, International Paint Ltd.
In situ pipeline coating process passes Saudi desert test
BY Baker S. Hammad, BSH Engineering Consultant Office
The no big bang theory
BY Peter Bock, Capital Inspectors
Conventional epoxy systems for protective and marine coatings
BY Dr. Daniel J. Weinmann, Momentive Specialty Chemicals Inc.
Preparing concrete floors
BY Tracey Glew, The Preparation Group
Innovative coating systems for steel bridges: a review of developments
BY Mike O'Donoghue, Vijay Datta, Stan Walker, Terry Wiseman, Peter Roberts, Norb Repman; International Paint LLC
Drawing on past experience: coating systems on UK bridges
BY David Deacon, Steel Protection Consultancy
2013 coatings trends & innovations
BY Brian Goldie
Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233
TEL 1-412-431-8300 • FAX 1-412-431-5428 • EMAIL firstname.lastname@example.org
The Technology Publishing Network