Wednesday, December 14, 2011; 11:00 AM - 12:00 PM Eastern
This webinar will provide a general overview of SSPC’s QP standards that are used in the Painting Contractor Certification Program (PCCP), as well as describe the scope and content of QP 1, QP 3, QP 6, and QP 8. The webinar will then explain requirements for training, hold point observations, and QC documentation.
SSPC is an accredited training provider for the Florida Board of Professional Engineers (FBPE). PE’s in Florida can now submit SSPC Webinar Exam CEU’s to the FBPE. If interested in submitting Webinar Exam CEU’s to the FBPE you must download the FBPE CEU form and successfully pass the Webinar Exam.
Participation in the webinar is free, but for those who wish to receive continuing education credits from SSPC, a test is available after the webinar. Cost of the test service is $25. You can register through the SSPC MarketPlace.
This webinar is part of the 2011 SSPC-JPCL Education Series, providing continuing education for SSPC recertifications as well as technology updates on important topics.
(right-click and choose 'Save Target As' to download; all downloads are copyright of their author.)
Alison B. Kaelin, is the KTA Corporate Quality Assurance Manager and Senior Consultant. She is a 2005 recipient of the SSPC Technical Achievement Award recognizing outstanding service, leadership and contribution to the SSPC and was recently named one of the top 25 thinkers of the decade by JPCL. She holds a BE in Civil and Environmental Engineering from Vanderbilt University, Nashville, Tennessee.
Ms. Kaelin has successfully completed the education, experience and testing requirements of the American Society for Quality (ASQ) to be certified as an ASQ - Certified Quality Auditor (CQA). Ms. Kaelin is also a NACE Certified Coatings Inspector Level 3 (Peer Review) (#3000). Ms. Kaelin has over 20 years of quality assurance, public health, environmental, transportation and construction management experience.
She has authored over 25 technical papers and publications.
The Society for Protective Coatings was founded in 1950 as the Steel Structures Painting Council, a non-profit professional society concerned with the use of coatings to protect industrial steel structures.
In 1997, the name of the association was changed to The Society for Protective Coatings to better reflect the changing nature of coatings technology and the ever-expanding types of construction materials.
SSPC is the only non-profit association that is focused on the protection and preservation of concrete, steel and other industrial and marine structures and surfaces through the use of high-performance protective, marine and industrial coatings. SSPC is the leading source of information on surface preparation, coating selection, coating application, environmental regulations, and health and safety issues that affect the protective coatings industry.
KTA-Tator EH&S Services
• Ambient & Worker Exposure Air Monitoring
• Safety & Health Program Development
• Lead Paint Assessments
• Health Hazard & Jobsite Safety Assessments
NO FLASH RUST -
Our HoldTight®102 salt remover & flash rust preventer prevents flash rust by removing surface contaminants. It has no equal; only wannabees.
Contact us for your
(800) 319.8802 email@example.com
DUALSCOPE®FMP100 with DataCenter IP
Transfer customized inspection plans from PC to FMP100 using step-by-step guidance with prompts and pictures throughout the measurement procedure
A Smart New Way to Measure
PosiTector SmartLink and free mobile app turns your
cell phone or tablet into a virtual PosiTector gage.
Sherwin-Williams Protective & Marine Coatings
With 4,000 distribution points and 3,700+ years of experience, Sherwin-Williams delivers the products, support and expertise you need, right where you need it.
Blastox - One Step
Don't waste money on added labor steps with other methods. Don't mix, meter or apply at the job-site. Avoid strict hazardous waste rules.
Let your painters paint
Performance Amine 1,3-BAC
A highly reactive cycloaliphatic diamine offering superior performance. Reasonable cost and curing efficacy makes it suitable for all types of epoxy resin applications.
ARMEX is The Only Choice
When removing coatings & cleaning substrates that cannot be damaged the only blasting abrasive to use is ARMEX. ARMEX for when Non-Destructive Cleaning is Critical.
Join SSPC and Enhance
Your Career !
ADVANCED RECYCLING SYSTEMS (ARS)
Recycling Machines, Dust Collectors,
Rapid Deployment units are time-tested
and approved for the rugged industrial
environment. Contact ARS today!