Wednesday, November 13, 2013; 11:00 AM - 12:00 PM Eastern
Preventing Corrosion Under Insulation is a function of the whole "sandwich" of jacketing, insulation and proper CUI coating over the
substrate. Specifiers must select CUI prevention systems which work together well in their particular corrosion environment.
Don’t get stuck with salami and sauerkraut on a corn tortilla when
you really wanted—and needed—a ham and swiss on rye.
Peter Bock, Inspection Sales Manager
Peter Bock is Inspection Sales Manager for Capital Inspectors, The Woodlands, TX. He is an Air Force veteran and has degrees from Tulane and the University of Northern Colorado.
He has thirty-six years of sales, management and technical service experience in Oilfield and Petrochemical Heavy Duty Coatings, in the United States, Canada, Mexico, Venezuela, Indonesia and Taiwan.
He has experience with both on and offshore production, drilling and workover rigs, shipyard work, natural gas and LNG, pipelines, terminals, refineries and chemical plants. He is a specialist in elevated temperature systems and corrosion under insulation mitigation.
Introducing Aerolon, a new thermal insulating coating from Tnemec. Its innovative, fluid-applied formulation features the world’s best insulating solid, aerogel. Equally effective in both interior and outdoor environments, Aerolon provides exceptional corrosion under insulation (CUI) resistance, significant energy savings, contact burn protection, and fast, labor-saving application. Part of a complete coatings system, Aerolon’s many wide-ranging benefits make it an all-in-one-solution. For more information, visit tnemec.com/aerolon.
Corrosion Under Insulation (CUI);
hydraulic pump applies
smooth and continuous
pull-off pressure at user
selectable rates. No twisting,
pumping or cranking
Termarust (HR CSA) Chemically Stops
Pipeline Utility Aerial crossings coated since 1992. Termarust's (HR CSA) was used to overcoat lead paint and preserve cables, pipes and support towers.
Denso Protal Liquid Coatings
A full range of fast cure, high build epoxies for a variety of above and below ground corrosion protection.
Call 1-281-821-3355 or Visit densona.com
3M Introduces Abrasion Resistant Epoxy Coating
3M™ Scotchkote™ AREC 328 is easy to apply and can be used as a conventional Abrasion Resistant Overcoat (ARO) or as a primary corrosion protection coating.
The proven corrosion protection
properties of our zinc dust prolong
the life of marine coatings. U.S. Zinc –
Helping the world work™
Oxford Instruments Coating Thickness Analyzers
Measure paint thickness/protective coatings using Oxford Instruments’ handheld and benchtop gauges, and XRF analyzers.
Email firstname.lastname@example.org or +1 800-447-4717
CNSL Based Products
Renewable CNSL epoxy curing agents and resins with fast cure at low temperature, adhesion to unprepared surfaces and excellent corrosion and water protection.