Monday, September 30, 2013; 11:00 AM - 12:00 PM Eastern
Third in a series presented by Kevin Morris of Sherwin-Williams. This webinar will highlight issues related to comparing products based solely on ASTM methods and how a misunderstanding or lack of knowledge of these standards could lead one down a path of excluding quality products. The webinar will also briefly look at the function of marketing practices as it relates to published results by manufacturers. The webinar will also discuss the possibility of better alternatives for pass/fail criteria such as SSPC standards.
(right-click and choose 'Save Target As' to download; all downloads are copyright of their author.)
Kevin Morris, Regional Market Segment Director, Water & Wastewater
Kevin Morris has been employed with Sherwin-Williams for 21 years, with the past 12 years dedicated to the Protective & Marine Coatings Division. In the past, Morris has served as Protective & Marine Coatings Sales Representative and Corrosion Specification Specialist in the Southeastern United States. Currently, Morris is responsible for the North American Water & Wastewater Market Segment for Sherwin-Williams Protective & Marine Coatings Division.
Morris is a NACE Level III Certified Coatings Inspector, a Certified Concrete Coatings Inspector with The Society of Protective Coatings, and an Instructor for The Society of Protective Coatings – Concrete Coatings Basics and Concrete Coatings Inspector programs. He has written and published numerous papers and articles for organizations such as:
• Paints and Coatings Expo (PACE)
• International Concrete Repair Institute (ICRI)
• America Water Works Association (AWWA)
• Water Environment & Technology (WE&T)
• Journal of Protective Coatings & Linings (JPCL)
Sherwin-Williams is a single source coatings supplier and consultant to the water-wastewater market with a comprehensive product line engineered to provide the highest corrosion protection with the fewest applied coats – balancing initial cost, downtime, service life, preferred maintenance schedule and ease of application – for atmospheric and immersion applications. With operations dating back 150 years, the company pioneered the development and commercialization of paint in a can, as well as single coat, rapid cure, optically active and edge retentive systems. Sherwin-Williams provides NACE-certified technical support on the ground to ensure that coatings are applied properly and customers get what they’re paying for with no headaches. The company works in tandem with each customer to maximize its ability to protect public safety and efficiently manage water storage, sewer collection and treatment plant resources. For more information about Sherwin-Williams and its products, visit www.sherwin-williams.com/protective.
• Extends Service Life
• Single Coat Application
• Cure to Service in 24 Hours
New resins from BASF will have metals loving water:
Excellent corrosion resistance, low VOC, high gloss, thin films basf.us/industrialcoatings
International Paint Engineered Coatings
Learn about our solutions for:
Piping & Equipment
POLYFLEX brand Polyurea
high chemical resistant membranes are used extensively to protect our environment in secondary containment applications.
Wasser Coatings Protect
some of the most important bridges in the country; learn about our NEPCOAT-approved system and our entire range of MCU & Polyurea coatings.
Blastox - One Step
Don't waste $$ on added labor steps with other methods. Don't mix, meter or apply at the job-site. Avoid strict hazardous waste rules.
Let your painters paint!
Join SSPC and Enhance
Your Career !