Wednesday, July 24, 2013; 11:00 AM - 12:00 PM Eastern
First in a series presented by Kevin Morris of Sherwin-Williams. This webinar will discuss the steps required to properly rehabilitate sewer structures including the control of inflow/infiltration, substrate repair or rebuild, and the generic types of coatings and linings that exist in the marketplace today to prevent corrosion. The webinar will also review some of the generic characteristics (good and bad) of these coatings and linings.
(right-click and choose 'Save Target As' to download; all downloads are copyright of their author.)
Kevin Morris, Regional Market Segment Director, Water & Wastewater
Kevin Morris has been employed with Sherwin-Williams for 21 years, with the past 12 years dedicated to the Protective & Marine Coatings Division. In the past, Morris has served as Protective & Marine Coatings Sales Representative and Corrosion Specification Specialist in the Southeastern United States. Currently, Morris is responsible for the North American Water & Wastewater Market Segment for Sherwin-Williams Protective & Marine Coatings Division.
Morris is a NACE Level III Certified Coatings Inspector, a Certified Concrete Coatings Inspector with The Society of Protective Coatings, and an Instructor for The Society of Protective Coatings – Concrete Coatings Basics and Concrete Coatings Inspector programs.
He has written and published numerous papers and articles for organizations such as: Paints and Coatings Expo (PACE), International Concrete Repair Institute (ICRI), America Water Works Association (AWWA), Water Environment & Technology (WE&T), and the Journal of Protective Coatings & Linings (JPCL).
Sherwin-Williams is a single source coatings supplier and consultant to the water-wastewater market with a comprehensive product line engineered to provide the highest corrosion protection with the fewest applied coats – balancing initial cost, downtime, service life, preferred maintenance schedule and ease of application – for atmospheric and immersion applications. With operations dating back 150 years, the company pioneered the development and commercialization of paint in a can, as well as single coat, rapid cure, optically active and edge retentive systems. Sherwin-Williams provides NACE-certified technical support on the ground to ensure that coatings are applied properly and customers get what they’re paying for with no headaches. The company works in tandem with each customer to maximize its ability to protect public safety and efficiently manage water storage, sewer collection and treatment plant resources. For more information about Sherwin-Williams and its products, visit www.sherwin-williams.com/protective
Performance Amine 1,3-BAC
A highly reactive cycloaliphatic diamine offering superior performance. Reasonable cost and curing efficacy makes it suitable for all types of epoxy resin applications.
Wasser Coatings Protect
some of the most important bridges in the country; learn about our NEPCOAT-approved system and our entire range of MCU & Polyurea coatings.
International Paint Engineered Coatings
Learn about our solutions for:
Piping & Equipment
Polyflex® Polyurea Linings
exhibit outstanding versatility in use; providing abrasion resistance, superior seamless waterproofing and high-chem corrosion protection. www.polyflexlinings.com
Termarust (HR CSA) Chemically Stops
Truss bridge treated with Termarust's (HR CSA) in 1995. This highway & rail truss bridge is still stable and there still is no active corrosion.
Offering custom grades and packaging of
zinc dust, oxide, metal and fines,
U.S. Zinc provides direct shipping
to locations worldwide. Helping the
DELIVERY ANYWHERE - BEST PRICING - FAST!
Lighten your load by buying 50lb. bags at bulk rates. From 50lb. bags to Jumbo Sacks to Bulk Loads, CESCO provides packaging to meet your specific job requirements.
Contact us: 888-772-3726 BlastandPaint.com