Wednesday, June 19, 2013; 11:00 AM - 12:00 PM Eastern
This webinar describes the most commonly used field methods for the retrieval and analysis of soluble salts on steel and other nonporous substrates. Coatings applied on surfaces contaminated with soluble salts exceeding a certain concentration exhibit diminished performance. This presentation is intended to assist the user in selecting specific procedures for retrieving and analyzing soluble salts. It discusses the various methods for retrieving salts from a surface and the analytical methods used to determine the concentration of the soluble salts in the extracted solution.
(right-click and choose 'Save Target As' to download; all downloads are copyright of their author.)
Lisa Detter Hoskin, Principal Research Scientist
Georgia Tech Research Institute
Dr. Lisa D. Detter-Hoskin is a Principal Research Scientist in the Georgia Tech Research Institute (GTRI). She has degrees including a Ph.D. in Inorganic chemistry from Purdue University and a M.S. in Management of Technology from Southern Polytechnical State Institute. She has been the Director of GTRI’s Materials Analysis Center for 16 years.
She has decades of theoretical and applied knowledge of materials testing, forensics and failure analysis. She has evaluated electronics, polymers/co-polymers, corrosion (chlorine, chlorine acids and ammonium nitrate/ammonia), phosphors, minerals, inks, paper, rubbers, paints, coatings, pigments, micro-channel plates, novel materials for prosthetic devices, ceramics, composites, catalysts (air-sensitive catalysts), textiles, foodstuffs, drugs, and carbon nanomaterials.
Dr. Hoskin’s corrosion research includes steel, stainless steel, galvanized steel, copper, brass, aluminum alloys, and titanium and tantalum coated alloys. She is particularly knowledgeable of aggressive inorganic acid induced corrosion reactions, field and lab testing, corrosion remediation and corrosion inhibitor systems. She has developed hot water ultrasonic extraction procedures for greater extraction efficiency of soluble salts from corroded metals.
She has had twenty five consecutive years of funding from DARPA, DOD, DOT, and hundreds of industrial firms. She and her research group are US experts on the exploitation of camouflage, countermeasures and deception (CCD) materials and paints. She also provides technical and legal consultation on insurance settlements, patent infringements, and accidents involving materials, failure analysis and corrosion.
Her professional memberships include the ACS; NACE; MAS; SSPC (Committee Chair SSPC-Guide 15, Field Methods for Retrieval and Analysis of Soluble Salts on Steel); and SEEMS.
CHLOR*RID International, Inc. is the world leader in soluble salt information, education, test and detection devices, and decontamination products. CHLOR*RID's corrosion industry experts provide excellent technical training and guidance to ensure successful surface preparation for our customers.
The full line of CHLOR*TEST kits and CHLOR*RID liquid soluble salt remover are recognized as the easiest, most accurate and economical tools for meeting stringent job specifications. Visit www.chlor-rid.com which provides in-depth, printable product and salt education information as well as access to training session sign-up and order forms. CHLOR*RID International, Inc. is dedicated to being the leading source of products and information for soluble salt testing and removal.
Salt contaminant levels;
NO FLASH RUST -
Our HoldTight®102 salt remover & flash rush inhibitor prevents flash rust by removing surface contaminants.
Contact us for your nearest distributor. (800) 319.8802 email@example.com
Surface cleanliness is
ESSENTIAL to coating
* TEST FOR SALTS
* PREVENT FLASH RUST
* REMOVE SALTS
More information at
Made in the USA from 100% recycled glass!
• NO Toxic Metals like Beryllium, which OSHA says is found in COAL & COPPER SLAG abrasives and can be highly toxic to some people!
• Largest national network of crushed glass with 6 plants & more in 2012!
have been used to protect some of the most important bridges in the country; learn about our NEPCOAT-approved system as well as our entire range of MCU coatings and Polyurea membranes.
Our New Protective Coatings Centers
Our complete range of International and Devoe Coatings products are available at our Protective Coatings Centers, making purchases faster and easier.
Desmodur® XP 2763 Drives Financial Results
High performance polyaspartic coatings
• Dry faster
• Fewer coats
• Superior corrosion/weather resistance
Metal Patching Compound
One Part / Ready to Use / High Temperature. Fill surface imperfections, voids, rough welds prior to painting and powder coating.