The First Word in Protective & Marine Coatings

A Product of Technology Publishing / PaintSquare
JPCL | PaintSquare News | Durability + Design | Paint BidTracker

This webinar is archived and recorded from a live presentation on Wednesday, March 27, 2013. Cost: FREE

Recording is not yet available.

Sponsor: Harsco Metals & Minerals

The objective of this webinar is to outlay potential respiratory hazards that can occur from abrasive blasting. The seminar would review the human respiratory system and how potential hazards such are particulates can cause damage to it. Once the potential hazards are discussed the applicable OSHA standards will be briefly reviewed, the discussion will involve review of how they are measured, how to understand the results of respiratory exposure testing, and how often testing should occur. The next section of the seminar will review what personal protective equipment can be used to mitigate the hazard, this discussion will focus on the different types of respirators and how they work; what respiratory protection should be generally used for certain applications and exposures will also be reviewed. The next section will discuss the care and use of the different types of respiratory protection; how to clean, store, and wear different types of personal protective equipment will be covered. The summary of the seminar will stress the importance of knowing the hazards and how to protect yourself by properly selecting, wearing, and caring for PPE.

Tweet    

Tagged categories: Abrasive blasting; Harsco Minerals; OSHA; Personal protective equipment; Respirators

Schmidt Improves Conversion Kits
Schmidt's conversion kits turn out-of-date blast pots into high quality, efficient blasters. Quick, easy to install with step by step instructions.
Call 1-800-231-2085

Repair, Protect & Strengthen
Need a coating? Turn to Fox. We have solutions to repair, protect and strengthen concrete, steel and wood substrates. Call 888-760-0369 or email info@foxind.com

Dustless Coatings Removal
Strip it, clean it, and profile it,
all dust free! High production
rates and Blast like finishes.
Comply with new lead
standards.

Green Diamond is the “Chosen”one.
Your  source for  high quality specialty sand. Superior Blasting Efficiency and an Excellent Surface profile. Available for on-site assistance.

From Detection to Correction
Corrosion Probe, Inc. has the Most Concrete Coatings Experience and Expertise. Contact us today at
860-767-4402, www.cpiengineering.com

CNSL Based Products
Renewable CNSL epoxy curing agents and resins with fast cure at low temperature, adhesion to unprepared surfaces and excellent corrosion and water protection.

Click here if you
Dare to Compare
Permanent Visco-Elastic Corrosion Prevention Traditional systems versus Stopaq Solutions.

The Technology Publishing Network