Rubber In a can!
Rubberized Spray in a
Handy Aerosol Can
• Stays flexible
• Seals off moisture penetration
• Non sagging formulation
• Will not crack, chip or peel
• Apply to wet and dry surfaces
NO FLASH RUST -
Our HoldTight®102 salt remover & flash rush inhibitor prevents flash rust by removing surface contaminants.
Contact us for your nearest distributor. (800) 319.8802 email@example.com
LUMIFLON® Coatings Dominate The International Bridge Market
LUMIFLON based coatings can last up to 30 years without fading, reducing life-cycle costs, re-application or replacement of underlying surfaces. Contact: 1-610-423-4300
GOT LEAD? Specify Pretox System products
The ONLY Lead Stabilizer
Compatible with All
Paint Removal Methods.
Works with all Blast Media:
Grits | Recyclable Abrasives
| CO2 | Water | Power Tools | Etc.
Call Dave Steffen at 800.338.8296.
New resins from BASF will have metals loving water:
Excellent corrosion resistance, low VOC, high gloss, thin films basf.us/industrialcoatings
The MBX Bristle Blaster
Get a 2.7 to 3.3 mil profile and a
Near White Metal Clean.
For info visit www.mbxit.com
or call 877 629-8777
Polyurethane and Polyurea Sprayed-On Protection
Buy POLYURETHANE or POLYUREA coatings and spray equipment for years of proven chemical resistance, water- and weather-proofing, and structural improvements.
Schmidt's VBS System reduces blowdown intensity, prevents exhaust from damaging floor while using no screens or filters.
Reduces sound; Increasing safety.