PaintSquare.com
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 

 

Daily Quiz (31)


In a concrete polishing specification, which of the following is a prescriptive rather than a performance requirement?


True or false: Both wet polishing and dry polishing are used to create polished concrete.


True or false: According to the Concrete Polishing Council of the American Society of Concrete Contractors, the grinding stage of the concrete polishing process is carried out with bonded abrasive of 100 grit or lower.


True or false: Guard products or stain protectors for polished concrete floors are not breathable.


True or false: Aggregate exposure on a concrete floor designated as “cream” by the Concrete Polishing Association (CPAA) is defined as “fine aggregate exposure with little or no medium aggregate exposure at random locations.”


True or false: In creating the best appearance on a concrete polished floor, it is more important to achieve a higher specular gloss value than it is to achieve a high distinctness of image value.


In concrete polishing work, an appearance defined as a Level 4 sheen and a cream aggregate exposure is the most expensive to produce.


True or false: A new concrete surface finished with a power trowel would tend to have low porosity.


Which of the following materials is used to densify concrete?


How does terrazzo differ from polished concrete?


True or false: SSPC has a committee to qualify contractors to install polished concrete floors.


True or false: Among concrete polishing technologies, there are now polishable dyes and toppings.


What term is used by the Concrete Polishing Association of America (CPAA) to describe the condition when a diamond tool has refined a concrete surface to the point when it no longer cuts the surface, or cuts very little?


What is the minimum number of abrasive passes suggested as necessary by the CPAA to achieve Level 4, highly polished concrete?


True or false: According to a recent D+D article, maintenance procedures and costs for polished concrete floors can be up to 70% lower than for other floor coverings.


True or false: The most accurate way to specify the finish on a polished concrete floor is to refer to grit levels, such as an 800-grit finish.


In the Concrete Sawing and Drilling Association’s CSDA ST-115 standard on polished concrete, what does the value Ra stand for?


The term “guard” is used to describe a product in what technical discipline?


True or false: According to the Concrete Polishing Association of America, the danger of slipping on polished concrete floors tends to be greater than that of most other floor coverings.


In concrete polishing, what is the term used to describe the point when the diamond tool has refined the surface to the degree to which it no longer cuts, or cuts very little, under its current weight and variables as defined by the Concrete Polishing Association of America (CPAA)?


True or false: In creating the best appearance on a concrete polished floor, it is more important to achieve a higher specular gloss value than it is to achieve a high distinctness of image value.


What term is used by the Concrete Polishing Association of America to describe the condition when a diamond tool has refined a concrete surface to the point when it no longer cuts the surface, or cuts very little?


Which of the following chemistry types are used as densifiers for the concrete polishing process?


True or false: Polished concrete flooring is maintenance-free after it has been applied.


What is the main purpose of lithium silicate in the diamond polishing of concrete?


What is one difference between polished concrete and terrazzo?


True or false: Grinding, densifying, honing, and polishing is the typical sequence of surface preparation steps in creating a polished concrete floor.


Which of the following organizations is dedicated to the advancement of concrete polishing?


What makes polished concrete (by dry grinding) a contributor to green building objectives?


Which of the following chemistry types are used as densifiers for the concrete polishing process?


Resin-bonded diamonds are used for what purpose?


 
 
   

**Commercial white papers, product videos, and other sponsored documents posted on this site are paid content from third-party companies; inclusion and posting on this site does not imply an endorsement nor recommendation of the content by Technology Publishing/PaintSquare. By signing in and viewing or downloading this paid content, you agree to make your name and full contact information available to the sponsor of the content.

Advertisements
 
SAFE Systems, Inc.
 
Portable Blast &
Recovery Equipment
 
Trailer or skid mounted blast and recovery equipment. Systems designed for maximum versatility, environmental compliance
and overall cost savings.
Call 1-800-634-7278
 

 
SABRE Autonomous Solutions
 
Introducing the ALPHA1 Blasting Robot
 
Once installed and commissioned – simply
SCAN PLAN BLAST.
 

 
Detail Masters
 
Overspray Removal
 
We offer professional, turnkey service and unparalleled quality!
Our process can save hundreds— even thousands of dollars. It's fast, environmentally safe and 100% guaranteed.
 

 
SEMicro Division, M.E. Taylor Engineering, Inc.
 
Coatings Adhesion Testers
 
The PATTI® accurately measures the bond strength between coating & substrate. Outfitted properly, the surface can be rough, porous, or curved & >10K psi strong!
 

 
Jotun Paints Inc.
 
Jotachar JF750 - The Time Saving Solution
 
The only mesh free solution for jet fire scenarios. Jotachar saves installation time and material costs - the next generation of epoxy passive fire protection.
 

 
Clemco Industries Corp.
 
Maximum Dust Suppression Systems Start at $14,950
 
The system comprises proven technology and equipment with user-friendly flexibility in mind. See it in action.
 

 
Tnemec Company, Inc.
 
Online Coating Courses from Tnemec
 
For decades, Tnemec has offered its expertise to clients presenting face-to-face coatings courses. Now, these presentations are available to anyone for CEUs at Tnemec University.
 

 
HoldTight Solutions Inc.
 
NO FLASH RUST - NO CONTAMINANTS
 
Our HoldTight®102 salt remover & flash rust
preventer prevents flash
rust by removing surface contaminants. Contact us
for your nearest distributor.
(800) 319.8802 sales@holdtight.com
 

 
RBW Enterprises, Inc.
 
Robotic Blasting and Painting
 
When using the FasterBlaster and FasterPainter, blasting and painting can be conducted simultaneously. View the video for a full explanation of the operation.
 

 
DeFelsko Corporation
 
PosiTector SHD Shore Hardness Durometer
 
PosiTector SHD measures the hardness of non-metallic materials. Features a measurement timer, auto ignore mode and internal memory. Shore A or D available.
 

 

Technology Publishing Co., 2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@paintsquare.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us