PaintSquare.com
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram
Search the site

 

 

Daily Quiz (35)


True or false: SSPC has a quantitative method for measuring the surface profile of concrete.


What is the name for the temperature range within which an amorphous polymer changes from a flexible to a brittle state?


True or False: ASTM D3359, “Standard Test Method for Measuring Adhesion by Tape Test,” measures the tensile adhesion of a coating.


What is the acronym for an instrument used to conduct the ASTM 4541 test, Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers?


True or false: The water vapor transmission of a coating is not a linear function of a coating’s film thickness.


True or false: ASTM D4417 describes three methods for measuring surface profile of blast-cleaned steel using either a digital profile gage or a surface profile comparator or a portable stylus instrument.


True or false: Photographic standards are sometimes used to assess the degree of cracking of exterior coatings.


True or false: According to a recent JPCL article, the threshold values in ASTM standards for deeming concrete suitable to be coated are neither achievable nor realistic for below-grade structures.


True or False: ASTM D3359, “Standard Test Method for Measuring Adhesion by Tape Test,” measures the tensile adhesion of a coating.


How is a mandrel used in testing of coatings?


True or false: A pull stub is part of a destructive test apparatus used to measure the dry film thickness of coatings.


What organization published a revised standard in 2012 on measuring dry film coating thickness that focuses on frequency of measurements and acceptablility of acquired results?


What organization developed a standard practice for building enclosure commissioning?


What ASTM technical committee has a subcommittee that deals with air barriers?


True or false: The ASTM standard test method for measuring pull-off adhesion of coatings on concrete is the same one used for measuring pull-off adhesion of coatings on steel.


What ASTM committee deals with performance of buildings as its main subject?


What is revealed by ASTM’s “Anhydrous Calcium Chloride (ASTM F1869-11)-Floors?”


What organization is collaborating with ASTM on development of a building enclosure commissioning process?


ASTM has a “plastic sheet method.” What is its purpose?


According to ASTM D 6083, what should be the minimum dry film thickness for elastomeric acrylic, cool roof coatings?


True or false: ASTM has test methods for measuring the air barrier performance all of the following: materials, assemblies, and whole buildings.


True or false: The ASTM test method for pull-off adhesion of coatings is the same for both metal and concrete.


True or false: Requiring several thousand hours of successful performance in a salt fog test (ASTM B 117) is appropriate for specifying an immersion lining in a potable water tank.


What is the scope of ASTM Committee D33?


True or false: Cyclic corrosion testing of protective coatings in the laboratory is now considered a better indicator of field performance than the traditional salt fog test, ASTM B 117.


True or false: ASTM recommends the same test method for both concrete and steel substrates to determine the adhesion of a coating using pull-off test devices.


The ASTM pencil hardness test can be used to determine what about a coating?


What ASTM Committee deals with nuclear coatings?


ASTM International’s Committee D-1 is developing its first-ever standard for what?


True or false: ASTM has separate test methods for steel and concrete substrates in determining the pull off adhesion of coatings.


True or false: ASTM has a test method for evaluating the adhesion of a coating by cutting and probing it with a penknife.


True or false: There is an ASTM test method for comparing relative performance of concrete repair mortars in their resistance to cracking.


True or false: ASTM has a test method to determine the relative performance of repair mortars in their resistance to cracking.


ASTM C 840 describes what type of finishing?


True or false: ASTM publishes descriptions of solvent rub tests for both inorganic and organic coatings, which are sometimes used to assess degree of cure.


 
 
   

**Commercial white papers, product videos, and other sponsored documents posted on this site are paid content from third-party companies; inclusion and posting on this site does not imply an endorsement nor recommendation of the content by Technology Publishing/PaintSquare. By signing in and viewing or downloading this paid content, you agree to make your name and full contact information available to the sponsor of the content.

Advertisements
 
SEMicro Division, M.E. Taylor Engineering, Inc.
 
Coatings Adhesion Testers
 
The PATTI® accurately measures the bond strength between coating & substrate. Outfitted properly, the surface can be rough, porous, or curved & >10K psi strong!
 

 
Detail Masters
 
Overspray Removal
 
We offer professional, turnkey service and unparalleled quality!
Our process can save hundreds— even thousands of dollars. It's fast, environmentally safe and 100% guaranteed.
 

 
SAFE Systems, Inc.
 
Custom blast rooms
by SAFE Systems
 
Don't waste time and money "making do" with a "standard" design. Let us work with you to design and build the system that best fits your requirements.
Call 1-800-634-7278
 

 
SSPC: The Society for Protective Coatings
 
http://www.sspc.org/
 
Join SSPC and Enhance
Your Career !
 

 
Clemco Industries Corp.
 
Maximum Dust Suppression Systems Start at $14,950
 
The system comprises proven technology and equipment with user-friendly flexibility in mind. See it in action.
 

 
Termarust Technologies
 
Termarust (HR CSA) Chemically Stops
Active Corrosion
 
Arch truss treated with Termarust's (HR CSA) in 2003. This steel arch bridge is rust free on all surfaces including the crevice corroded joints and connections.
 

 
US Minerals
 
Hit Harder. Clean Faster.
 
Black Diamond abrasive products are the toughest, most effective blasting media and supply the superior power you need to get any job done.
 

 
NLB Corporation
 
NLB Sure Shroud: Greater Protection and Flexibility
 
NLB’s Sure Shroud’s lighter weight and flexibility reduces operator fatigue and offers unmatched protection against high pressure hose ruptures. 10k to 40k psi rated.
 

 
Polygon
 
POLYGON - Temporary Humidity Control
 
We specialize in innovative climate control solutions for industrial painting, utilizing alternative energy sources and combining desiccants with heating or cooling.
 

 
KTA-Tator, Inc. - Corporate Office
 
KTA-TATOR LABORATORY SERVICES
 
• Coating failure analysis
• Independent
  comparative testing
• Accelerated
  weathering testing
• Toxic metals testing
• A2LA Accredited
Contact: Cindy O'Malley,
at 412-788-1300 x180
 

 

Technology Publishing Co., 2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@paintsquare.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us