PaintSquare.com
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 

 

Daily Quiz (35)


True or false: Electroplating and anodizing are two terms used to describe the same process.


True or false: With periodic field maintenance, a coating system for steel bridges with a zinc-rich primer and typically used midcoats and topcoats can exceed a service life of 100 years, according to a JPCL article on the subject.


What is the subject of the latest joint publication of a standard by SSPC and NACE?


Who was the original author of the NACE publication, Corrosion Prevention by Protective Coatings?


ISO/TC 35/SC 14 is in charge of a standard on what topic?


What is it called when a coating controls corrosion by preventing the passage of soluble ions to the underlying steel?


By what process is steel covered with an impervious oxide to inhibit chemical or electrochemical reactions on the surface?


Which of the following is not a strength of anodizing aluminum substrates?


True or false: Calcium borosilicate pigments have been used as inhibitive pigments in anti-corrosion coatings.


The list of corrosion control technologies, as described by NACE, includes cathodic protection, chemical inhibitors, coatings and what fourth technology?


True or false: Zinc dust is the only sacrificial pigment commonly used in anti-corrosive coatings.


Micaceous iron oxide provides what type of anti-corrosion protection to coatings?


True or False: Anodizing provides excellent corrosion resistance in coastal settings.


True or false: Bimetallic corrosion, such as that which results when two dissimilar metals are connected electrically in a water tank interior, occurs most rapidly when the two metals are close together rather than far apart in the galvanic series.


True or false: The application of a coating to stainless steel that is electrically connected to carbon steel in immersion service can reduce but cannot completely eliminate the effects of galvanic corrosion, according to a recent JPCL article.


True or false: Bending and forming of aluminum can be accomplished without harming its anodized finish.


What mechanism of corrosion protection does zinc phosphate provide to coatings?


In a laboratory test of metalized coatings reported recently in JPCL, which metal or alloy provided the best combination of corrosion protection and service life in immersion and intermittent immersion conditions simulating Bureau of Reclamation exposures?


High cross-link density contributes the most to what type of corrosion protection?


ISO 12944 on corrosion protection of steel with protective coatings lists how many environmental exposure classes?


What pigment is made by both a French process and an American process?


True or False: Both zinc and aluminum are used as thermal spray materials for corrosion protection of steel.


A recent 5-year inspection of a lining system on a potable water tank bottom that had suffered significant soil-side corrosion in Melbourne, Australia, showed excellent performance from what lining type?


What generic type of topcoat is often claimed to enable a two-coat system rather than a conventional 3-coat system (zinc, epoxy, polyurethane) for corrosion protection of steel?


Pascal Verbiest, in his recent JPCL article, “Developments in Zinc Primers for Corrosion Protection,” describes four mechanisms of corrosion resistance provided by zinc primers.


What are the most commonly used materials for thermal spraying when it is used for corrosion protection?


Platey pigments contribute to what mechanism of corrosion protection?


The IMO’s Performance Standard for Protective Coatings for corrosion protection of cargo tanks in crude oil carriers requires that coatings applied to new tanks must have a useful life of how many years in good condition?


True or false: Thermal spray coatings of aluminum, zinc, and their alloys for corrosion protection of steel are very surface-tolerant.


What type of coating combats corrosion mainly by preventing moisture and oxygen from reaching the steel surface?


What is the most widely used method to prevent corrosion of carbon steel?


What is the most commonly used material for thermal spraying when it is used for corrosion protection?


True or false: Any kind of metal can be used in coatings for sacrificial protection of steel.


Who publishes the Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and their Alloys and Composites for the Corrosion Protection of Steel?


Cross-link density, use of platey pigments, and thick films contribute to what mechanism of corrosion protection in a coating?


 
 
   

**Commercial white papers, product videos, and other sponsored documents posted on this site are paid content from third-party companies; inclusion and posting on this site does not imply an endorsement nor recommendation of the content by Technology Publishing/PaintSquare. By signing in and viewing or downloading this paid content, you agree to make your name and full contact information available to the sponsor of the content.

Advertisements
 
Strategic Materials Inc.
 
Coming April 2017
 
Available April 2017. TruAbrasives™, a clean crushed glass abrasive superior to other abrasives for performance, health, and environmental benefits.
 

 
Detail Masters
 
Overspray Removal
 
We offer professional, turnkey service and unparalleled quality!
Our process can save hundreds— even thousands of dollars. It's fast, environmentally safe and 100% guaranteed.
 

 
SABRE Autonomous Solutions
 
Introducing the ALPHA1 Blasting Robot
 
Once installed and commissioned – simply
SCAN PLAN BLAST.
 

 
SAFE Systems, Inc.
 
Portable Blast &
Recovery Equipment
 
Trailer or skid mounted blast and recovery equipment. Systems designed for maximum versatility, environmental compliance
and overall cost savings.
Call 1-800-634-7278
 

 
Montipower, Inc.
 
The MBX Bristle Blaster
 
Get a 2.7 to 3.3 mil profile and a Near White Metal Clean. For info visit www.mbxit.com or call 877 629-8777
 

 
KTA-Tator, Inc. - Corporate Office
 
New KTA Pipeline Inspection Kit
 
• Defelsko standard memory body
• Positector FTS 0-250 mils, cabled dry film thickness probe
• NEW Positector Shore D hardness probe
• All essential inspection equipment!
Visit www.ktagage.com
 

 
CHLOR*RID International Inc.
 
SOLUTIONS THAT WORK
 
Companies that invest in corrosion control use CHLOR RID products
  • Soluble salt removal liquid
  • Test kits to verify contamination levels
  • Surface passivation to hold the blast
INFO@CHLOR-RID.COM 800.422.3217
 

 
RBW Enterprises, Inc.
 
Robotic Blasting and Painting
 
When using the FasterBlaster and FasterPainter, blasting and painting can be conducted simultaneously. View the video for a full explanation of the operation.
 

 
Advanced Recycling Systems
 
Recycler Rentals
 
Abrasive Recycling Systems, Dust Collectors, Vacuum Units, and Lift Platforms. Quality Sales, Service, Parts & Rentals!
ARS Recycling Systems - Phone 330.536.8210
 

 
HoldTight Solutions Inc.
 
NO FLASH RUST - NO CONTAMINANTS
 
Our HoldTight®102 salt remover & flash rust
preventer prevents flash
rust by removing surface contaminants. Contact us
for your nearest distributor.
(800) 319.8802 sales@holdtight.com
 

 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@paintsquare.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us