| Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise



Blogs (1)

Deep Dive into Subsea Coatings

From Inspector's Corner by Lee Wilson

I was approached recently by a fellow coating inspector who had applied for a positio...


Problem Solving Forum (1)

I am experiencing problems with a paint system on some vessels we built. The system is an ethyl silicate zinc primer, glass flake epoxy tie-coat and aliphatic poly top coat. The project is constructed from A516 boiler plate 1/4 in thick. Blasted to SP10 with 2.5 mil profile. Painting is being done inside a paint booth where ambient conditions clearly meet the specification. The coatings are exhibiting symptoms of solvent popping in a specific area on the exterior of the vessel. The problem only manifests itself over the back side of a weld that is on the inside of the vessel. We have made numerous adjustments to the system as well as the process to try to solve the issue. Nothing is helping. The manufactures reps are scratching their heads, and I am pulling my hair out. Any input would be welcome.


Articles (2)

FEVE Technology for Higher Performance Coating Systems on Bridges

by Bob Parker, AGC Chemicals Americas, Inc.

This article describes fluoroethylene vinyl ether (FEVE) resin technology for bridge ...

Bridge Coating Performance: Two-Coat vs. Three-Coat Systems

by Shameem A. Khan, Maryland State Highway Administration

The author describes the results of various performance tests to determine whether tw...


Video Learning Center (8)

Application: A PaintSquare Video Education Series

The PaintSquare Pro Video Series: A collection of technical presentations hosted by in cooperation with SSPC

A collection of archived webinars hosted by focused on coatings application.

Coatings Technology: A PaintSquare Video Education Series

The PaintSquare Pro Video Series: A collection of technical presentations hosted by in cooperation with SSPC

A collection of archived webinars hosted by focused on coatings technology and their applications.

see more video learning center collections

Novatek Corporation
Novatek Corporation, Dustless Coatings Removal

Strip, clean and profile all dust free! Comply with new lead standards. Contact today: (866) 563-7800

SAFE Systems, Inc.
Custom blast rooms
by SAFE Systems

Don't waste time and money "making do" with a "standard" design. Let us work with you to design and build the system that best fits your requirements.
Call 1-800-634-7278

Novetas Solutions
Safer Abrasive! 100% Recycled Glass!

NO Free Silica, Beryllium or other human Toxins! Great White Metal Finish and safer than Slags!
Call us at 866-775- 6226

Tarps manufacturing, Inc.
QUALITY MADE IN AMERICA —Available near you!

CLICK to get a behind-the-scenes look at how Tarps Manufacturing makes the highest-quality tarps right here in the USA — available nationwide.

NLB Corporation
NLB Sure Shroud: Greater Protection and Flexibility

NLB’s Sure Shroud’s lighter weight and flexibility reduces operator fatigue and offers unmatched protection against high pressure hose ruptures. 10k to 40k psi rated.

Atlantic Design, Inc.

The ADI HD40 Dust Collector is a smaller, more economical way to meet/ exceed Industry standards. Watch the video for details on our website. 866.Call.ADI


The Next Generation
of Blasting

• Lightest
• Coolest
• Most Comfortable
• Most Dependable

Axxiom Manufacturing
Revolutionary Units

By integrating Schmidt's Aftercoolers with our blast pots, these systems remove moisture from air and minimize equipment footprint on jobsite.
Call 1-800-231-2085

Dampney Co., Inc.
High Heat Stainless Steel Paint & Coating

Wood burning stoves, fire pits, BBQ Smokers, Exhaust Manifolds Aerosol Cans, Quarts, Gallons, 5 gallons 1200F resistance

Wasser High-Tech Coatings Inc.
Wasser Coatings Protect

Wasser Coatings offer a complete range of Moisture Cure Urethane (NEPCOAT approved) systems in addition to Polyurea membranes and linings(NSF).

Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker

EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us

© Copyright 2000-2016, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail