PaintSquare.com


The First Word in Protective & Marine Coatings

A Product of Technology Publishing / PaintSquare
JPCL | PaintSquare News | Durability + Design | Paint BidTracker

The PaintSquare Guide to OSHA

| More

Daily Quiz (47)

All content matching this tag

Which of the following types of contaminants, introduced in the vicinity of a person wearing a half-mask respirator to determine if it fits properly, are allowed by OSHA for qualitative fit testing?

Monday, August 18, 2014


True or false: OSHA’s work practice controls to minimize exposure to hazardous materials, such as toxic dust, can include, in most instances, job rotation.

Wednesday, June 25, 2014


True or false: If ventilation is used on a worksite to mitigate safety hazards, it is classified by OSHA as personal protective equipment.

Monday, May 5, 2014


OSHA requires controls for fall hazards when workers are at what height or higher above the ground or lower level?

Wednesday, April 16, 2014


True or false: OSHA has developed three sets of regulations on abrasive blasting in three primary industries: general industry, maritime, and construction.

Monday, March 24, 2014


True or false: OSHA can issue a citation even when one of its regulations has not been violated.

Friday, January 24, 2014


Before a worker enters a permit-required confined space, OSHA requires testing of the atmosphere in the space to determine which of the following?

Wednesday, January 22, 2014


True or false: OSHA’s Construction Industry Fall Protection Standard is invoked when a worker operates at a height of 10 feet or greater.

Friday, January 3, 2014


True or false: OSHA now forbids the use of silica sand as a blasting abrasive.

Tuesday, December 17, 2013


What is the maximum level of carbon monoxide allowed by OSHA in breathing air for supplied-air respirators?

Monday, December 16, 2013


The revised OSHA Hazard Communication Standard, which went into effect in May 2012, requires training of employees on new label elements and safety data sheet formats by what date?

Thursday, December 12, 2013


Respirators must be approved for use by what organization?

Tuesday, October 22, 2013


True or False: In August this year, OSHA issued a proposed rule banning use of crystalline silica as a blasting abrasive.

Wednesday, October 2, 2013


True or False: OSHA classifies supplied-air respirators as engineering controls.

Wednesday, September 25, 2013


The worker blood lead level established for triggering an OSHA inspection was reduced in 2012 to what?

Tuesday, September 10, 2013


True or false: OSHA’s 2008 National Emphasis Program on Crystalline Silica explicitly identified abrasive blast cleaning as a high-exposure activity.

Tuesday, September 3, 2013


True or False: OSHA has lowered the permissible exposure limits on crystalline silica.

Thursday, August 29, 2013


Which of the following agents is not accepted by OSHA for respirator fit testing?

Thursday, August 22, 2013


True or false: OSHA recently announced a National Emphasis Program on isocyanates.

Monday, July 8, 2013


True or false? For a supplied-air respirator, OSHA requires Grade D air with an oxygen content of 15 percent to 19.5 percent.

Thursday, June 6, 2013


What U.S. president signed the Occupational Safety and Health Act, establishing OSHA?

Friday, May 31, 2013


True or false: According to an OSHA study of painting contractor violations conducted in 2006-2007, the OSHA Required Fall Protection Rule (1926.0501) was the one most often violated.

Thursday, May 2, 2013


What is the name of the provision in OSHA standards that is used in inspections where there are no specific standards applicable to the particular hazard involved?

Tuesday, April 2, 2013


True or false: According to OSHA, permissible exposure limits (PELs) and Threshold Limit Values (TLVs) are both required limits on exposure to airborne contaminants.

Wednesday, March 27, 2013


True or false: One main reason for OSHA’s 2012 revision to the Hazard Communication Standard was to harmonize it with global hazard communication standards.

Monday, February 11, 2013


True or false: Working at a height of 6 feet invokes OSHA’s Construction Industry Fall Protection Standard (29 CFR 1926 Subpart L).

Thursday, December 20, 2012


When did, or will, OSHA’s latest rules for residential fall protection (approved in 2010) take effect?

Thursday, December 13, 2012


What is the main reason OSHA revised its Hazard Communication Standard this year?

Thursday, December 13, 2012


What organization conducts research on safety and health issues and provides technical assistance to OSHA?

Friday, November 16, 2012


According to OSHA’s revised Hazard Communication Standard, when are employers required to have trained employees on new labeling and safety data sheet formats?

Wednesday, October 31, 2012


True or False: OSHA revised its Hazard Communication Standard 29CFR1910.1200 in March 2012 to align it with the United Nations’ Globally Harmonized System of Classification and Labeling of Chemicals.

Friday, July 6, 2012


What gives OSHA the authority to impose sanctions and fines for workplace hazards not described in OSHA regulations?

Tuesday, May 29, 2012


The most common category of OSHA citations issued against fabrication, galvanizing, abrasive blasting, and coating application facilities involves:

Friday, April 27, 2012


What is included in OSHA's General Duty Clause of the Occupational Safety and Health Act?

Friday, April 13, 2012


Which US President signed the Occupational Safety and Health Act, establishing OSHA?

Wednesday, September 14, 2011


According to OSHA, what is the primary problem with this marine scaffolding assembly?

Monday, September 12, 2011


When does OSHA require that an aerial lift operator undergo retraining?

Friday, September 9, 2011


True or false: OSHA can cite an employer only if workplace hazards violate specific OSHA regulations.

Tuesday, May 24, 2011


Skylights on roofs that do not meet OSHA regulatory requirements for hole covers need to have what OSHA-mandated safeguard?

Friday, April 15, 2011


What organization conducts research on safety and health issues and provides technical assistance to OSHA?

Wednesday, April 13, 2011


What safety precautions does OSHA require when work is conducted from swing stages 10 feet or more above the ground?

Thursday, April 7, 2011


Working at what height invokes OSHA's Construction Industry Fall Protection Standard (29 CFR 1926 Subpart L), requiring controls for fall hazards?

Wednesday, April 6, 2011


An individual using power tools to remove lead-containing paint is wearing a full face respirator with P100 (HEPA) filters and has been fit-tested using the banana oil method. What is the allowable lead exposure level for this worker, according to OSHA Standards?

Arnold Ferguson, CIH, CSP

Tuesday, March 29, 2011


What does OSHA's General Duty Clause require?

Thursday, March 24, 2011


True or false: This scaffold is compliant with OSHA requirements.

Monday, March 7, 2011


True or false: OSHA classifies respirators as engineering controls.

Wednesday, February 16, 2011


Safety hazards of a permit-required confined space, according to OSHA, include one or more of the following conditions.

Monday, October 11, 2010


**Commercial white papers, product videos, and other sponsored documents posted on this site are paid content from third-party companies; inclusion and posting on this site does not imply an endorsement nor recommendation of the content by Technology Publishing/PaintSquare. By signing in and viewing or downloading this paid content, you agree to make your name and full contact information available to the sponsor of the content.

   

Waterjet Technology Association (WJTA)
HP Waterjets, Related Products for Paint/Coating Removal, Surface Prep

www.wjta.org
. Networking
. Education
. Systems, Equipment
. Safety, Business Tips
314-241-1445


DeHumidification Technologies
HUMIDITY PROBLEMS?

DH Tech has the most innovative and reliable equipment available to
control humidity efficiently
and effectively.
IT'S UNDER CONTROL!


US Minerals
US Minerals -
Black Magnum

With nationwide production and distribution capabilities, U.S. Minerals supplies a complete range of coal slag and other abrasives to meet all of your blasting needs.


ABKaelin, LLC
Quality is our bottom line

Services include:
• Environmental, Health &
  Safety
• Contractor QP Certification
• Quality Assurance Programs
  and Auditing
• SSPC C3/C5 and other
  Training
• Coatings
• Design/Construction
See our website at abkaelin.com or contact us today abkaelin@comcast.com


HP Spartacote, LLC
Fully Integrated Polyaspartic Coating Systems

HP Spartacote manufactures a full line of patented high performance resinous flooring systems which offer rapid return to service, outstanding durability and chemical resistance.


NLB Corporation
Water jets surface prep high and low

See how quickly HydroPrep® tools do surface prep, with no containment needed. Choose automated Crawler for overhead, Vortex™ for floors, or handheld VertaJet™.


Minerals Research & Recovery

HIGH PERFORMANCE ABRASIVES

“Made in the USA!”
Why recycle waste from other countries? Go FASTER, CLEANER, at 1/3 THE COST with MR&R “All-American” Sharpshot®HP!!

WATCH THE VIDEO

 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker JPCL Europe

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2000-2014, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com