PaintSquare.com
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 

 

Daily Quiz (30)


In coating work, how is a portable stylus instrument used?


True or false: Wet film thickness gages are inadequate for measuring thickness of fast-set polyurea coatings.


What is the name of the test instrument used to determine a coating’s resistance to fading through accelerated exposure to light?


What is a vernacular term for a wet film thickness gage?


An ultrasonic dry film thickness gage can measure dry film coating thickness on what substrate(s)?


True or false: Polyurea coatings require use of low-voltage holiday detectors for continuity testing.


True or false: Some moisture meters based on conductivity readings can be used on both wood and concrete substrates.


What inspection instrument uses a wet bulb and a dry bulb?


What type of gages are used to measure the dry film thickness of coatings on concrete?


True or false: Prior to being used for measurements, all thermometers should be exposed to the environment they will be used in for sufficient time to allow them to stabilize, according to a recent JPCL article.


True or false: According to a JPCL article, one year is a good starting interval between calibrations of a magnetic dry film thickness gage.


One mil of coating thickness equals approximately how many microns?


True or false: A Tooke gauge can sometimes be used to measure the thickness of individual coats of paint within a multicoat system.


True or false: Most sling psychrometers are less accurate than most electronic pyschrometers.


True or false: An ultrasonic dry film thickness gage can measure coating thickness on concrete, but not on wood substrates.


In relation to coatings technology, what is a “fingerprint technique”?


What is a Tooke gauge?


True or false: A hypodermic pressure gauge is normally used to measure the working pressure of a plural-component spray system.


True or false: An eddy current gauge is used to measure dry film thickness of coatings non-destructively on concrete substrates.


True or false: A hygro thermometer is used to measure the moisture content and temperature of insulation on hot piping.


Continuity testing of non-conductive coatings applied to a steel substrate is carried out with what type of instrument?


What is another name for the portable stylus instrument used to measure surface roughness of blast-cleaned steel?


True or False: The PosiTest Air Leak Tester is a laboratory device for determining if mock-ups have air leaks.


True or False? SSPC-PA 2 (2012) addresses the use of two types of gages for measuring dry film coating thickness.


What type of gages are used to measure the dry film thickness of coatings on concrete?


How is a Tooke Gage useful in failure investigations?


Which of the following dry film thickness gages is destructive?


True or false: Magnetic gages can be used for the non-destructive measurement of dry film thickness of coatings on concrete substrates.


A conductivity meter is normally used to check for what contaminants on abrasive for blasting?


True or false: For non-conductive coatings up to 20 mils thick applied to conductive substrates, a high-voltage holiday detector is normally used to detect pinholes and other discontinuities.


 
 
   

**Commercial white papers, product videos, and other sponsored documents posted on this site are paid content from third-party companies; inclusion and posting on this site does not imply an endorsement nor recommendation of the content by Technology Publishing/PaintSquare. By signing in and viewing or downloading this paid content, you agree to make your name and full contact information available to the sponsor of the content.

Advertisements
 
SEMicro Division, M.E. Taylor Engineering, Inc.
 
Coatings Adhesion Testers
 
The PATTI® accurately measures the bond strength between coating & substrate. Outfitted properly, the surface can be rough, porous, or curved & >10K psi strong!
 

 
Strategic Materials Inc.
 
www.truabrasives.com
 
TruAbrasives™, a clean crushed glass abrasive superior to other abrasives for performance, health, and environmental benefits.
 

 
SAFE Systems, Inc.
 
Portable Blast &
Recovery Equipment
 
Trailer or skid mounted blast and recovery equipment. Systems designed for maximum versatility, environmental compliance
and overall cost savings.
Call 1-800-634-7278
 

 
Tarps manufacturing, Inc.
 
QUALITY MADE IN AMERICA —Available near you!
 
CLICK to get a behind-the-scenes look at how Tarps Manufacturing makes the highest-quality tarps right here in the USA — available nationwide.
 

 
W Abrasives
 
Unrivaled Expertise for your Surface Preparation
 
As the global leader in steel abrasives, W Abrasives material is the efficient and eco-friendly solution blasting with you to reach the perfect profile.
 

 
Vector Technologies Ltd.
 
The Original Performance Proven Vacuum Solutions
 
VecLoader® 616 Double Dump, Continuous Vacuum, 170 HP w/ 2,400 CFM & 28” Hg. 33% More Efficient than traditional vacuum systems! Choose Vector for the most powerful and the most reliable trailer mounted vacuums in the industry! Email us at: inquiry@vector-vacuums.com or call us at: 800-832-4010
 

 
Bullard
 
Upgrade with the Bullard GenVX
 
Click here for your blast helmet.
 

 
CHLOR*RID International Inc.
 
SOLUTIONS THAT WORK
 
Companies that invest in corrosion control use CHLOR RID products
  • Soluble salt removal liquid
  • Test kits to verify contamination levels
  • Surface passivation to hold the blast
INFO@CHLOR-RID.COM 800.422.3217
 

 
US Minerals
 
Hit Harder. Clean Faster.
 
Black Diamond abrasive products are the toughest, most effective blasting media and supply the superior power you need to get any job done.
 

 
Blastox/The TDJ Group, Inc.
 
Blastox® - One Step Lead Abatement
 
Sandblast additive delivered to jobsite pre-blended to eliminate hazardous abrasive wastes. Why mix, meter or apply at the job-site? Blast with ease and
Let your painters paint!
1(800)-252-7869
 

 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@paintsquare.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us