PaintSquare.com
      | Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise
  

 

Download our free Wastewater Treatment Coating Systems eResource Book

 

Daily Quiz (280)


True or false: Leafing aluminum pigments are completely wetted by the binder and thus spread evenly throughout the coating film.


True or false: In conditions of low humidity, water can be sprayed onto inorganic zinc-coated surfaces to accelerate cure.


True or false: Aliphatic polyureas do not have good color and gloss retention.


True or false: Polypropylene or polyethylene powder is sometimes applied by flame-spray to protect pipeline field joints.


Chlorinated rubber coatings are no longer used in most applications. What is the main reason?


What is the relationship between polyalcohols and polyols?


True or false: Woven roving is sometimes used to reinforce tank linings.


True or false: The “Cold Wall Effect” on tank linings refers to a temperature differential between the ambient air outside the tank and the temperature of the product stored inside.


What term is normally used to describe surface opalescence on epoxy films caused by reaction of amine co-reactant with carbon dioxide and water?


What type of alkyds are most likely to be used for overcoating lead-based bridge coatings?


What organization publishes performance standards for coatings on aluminum panels and extrusions?


What term denotes migration of a substance to the surface of a coating film?


True or false: Cashew nut shell liquid is sometimes used in the formulation of protective coatings.


True or false: The working time or gel time of a polyurea coating is generally 10 seconds or less.


What is the process by which vegetable oils and animal fats are turned into soap?


True or false: The photocatalytic activity of titanium dioxide in a coating can produce self-cleaning functionality.


The U.S. Naval Research Laboratory has developed an alternative to epoxy non-skid/non-slip deck coatings based on what technology?


Which of the following coating types is an inorganic/organic hybrid?


True or false: Thick-film intumescent coatings are used only to resist the impact of cellulosic fires on structural steel.


Alkyds are a specific type of what broader class of resins?


Synthetic dirt was recently developed by the Lawrence Berkeley National Laboratory for accelerated testing of what kind of coating?


True or false: Polypropylene powder is sometimes applied by flame spray to create a field joint coating system for transmission pipeline.


Which of the following is not an inhibitive pigment used in coatings for corrosion control?


What is another name for potassium silicate coatings?


Which of the following isocyanates is used in polyurethane coatings?


What polymer concrete resin is based on an alcohol derived from agricultural wastes such as rice and oat hulls and corn cobs?


Much of the growth of single-component water-borne acrylics for industrial maintenance has been at the expense of what other single-component maintenance coating type, according to a recent JPCL article on acrylics.


True or false: TDI and MDI are aromatic isocyanates.


True or false: An epoxy ester coating is a single-package material.


True or false: Coatings based on silicone resins have little resistance to chalking.


Acicular, fibrous, and nodular are terms used to describe what property of pigments?


True or false: Inorganic zinc-rich coatings, left untopcoated, decrease in barrier protection over time.


True or false: PVDF resins can be emulsified in water to create a single-component, ambient-cured, fluoropolymer coating.


The migration of asphalt from a roof to the surface of a white roof coating applied over it is called what?


What kind of concrete sealers penetrate the pores of the concrete and form little, if any, film build?


Micaceous iron oxide is a pigment providing what kind of properties to protective coatings among the choices listed?


Which of the following has been banned as an ingredient in antifouling coatings on ocean-going vessels?


True or false: Coating materials that form films simply by solvent evaporation without chemical change are called thermoplastics.


What is an exempt solvent?


True or false: A polysiloxane is an aliphatic polyurea.


True or false: Calcium aluminate mortars are sometimes used as linings for rehabilitation of manholes.


True or false: It is easier to remove coal tar epoxy than coal tar enamel from a steel substrate.


True or false: A polyaspartic coating is an aliphatic polyurea.


True or false: According to a recent JPCL article, foul-release hull coatings can be divided into hard and soft technologies.


What mechanism of corrosion protection does zinc phosphate provide to coatings?


In coatings, “American process” and “French process” refer to the creation of what material?


True or false: Some alkyd formulations will not undergo saponification if applied to high-pH substrates.


In a laboratory test of metalized coatings reported recently in JPCL, which metal or alloy provided the best combination of corrosion protection and service life in immersion and intermittent immersion conditions simulating Bureau of Reclamation exposures?


Ammonium polyphosphate is most likely to be found in what type of coating?


Among the various types of anti-foulings for ships, what are foul-release coatings?


True or false: Vinyl esters and polyester resins offer resistance to aggressive chemicals at elevated temperatures.


In SSPC’s Coating System Guide 12.00, Guide to Zinc-Rich Coating Systems, what type of untopcoated zinc-rich system is recommended for alkaline exposure, pH 10-12?


True or False: New coating standards published by SSPC in 2013 are composition-based, not performance-based.


What organization offers a standard that gives durability grades of low, medium, and high for corrosion-control coating systems in various environments and levels of surface preparation?


True or false: Titanium dioxide is a highly opaque pigment.


Which of the following coating types is most likely to be used on the faying surfaces of bolted steel joints?


The thickness of a coating is sometimes expressed in mils, sometimes in mircrometers or microns. Which unit is thicker, 1 mil or 1 micron?


What is a term for a systematic effort to determine the condition of metal and other substrates in an industrial plant?


True or false: Amine carbamation is sometimes called amine blushing.


What organization conducted exposure studies showing that coatings performance diminished on wood substrates that were pre-weathered before painting?


True or false: There is an organization of paint makers and industrial painting contractors in France that provides long-term guarantees for tank lining and other coating work.


What material is necessary to create an intumescent coating?


Which of the following features of a corrosion-control coating contribute to barrier protection?


True or false: The porosity of inorganic zinc-rich coatings increases over time after they are applied.


True or false: The MEK solvent rub test (ASTM D 4752) and the coin rub test are both used to provide an estimate of the cure of an inorganic zinc-rich coating.


True or false: When two dissimilar metals are in contact in the presence of an electrolyte, the more noble metal will experience galvanic corrosion.


True or false: The resin furan employs di- and tri-functional silanes as its primary building blocks.


True or false: The overlapping of platey pigments in a coating creates crevices that diminish the coating’s barrier properties.


Fluoropolymers are generally classified as what type of anti-graffiti coating?


True or false: With zinc-rich coatings on steel, the zinc becomes the anode in a galvanic cell and sacrifices itself to protect the cathode, the underlying steel.


True or false: Krebs units are units of elasticity of a paint.


True or false: If a zinc-rich coating has an epoxy binder, it is classified as both an organic and an inorganic zinc-rich coating.


True or false: SSPC-AB 1, Mineral and Slag Abrasives, includes manufactured, non-metallics such as silicon carbide.


Among the performance properties of polyureas, according to a recent JPCL article by O’Donoghue and Datta, which of the following is the weakest?


What is the relationship between a polyol and a polyalcohol?


True or false: Unlike their roles in entertainment and boxing, promoters in coatings induce, alter, or accelerate chemical reactions.


What solvent is used in the solvent rub test for cure of inorganic zinc coatings?


True or false: Flake-filled, novolac vinyl esters have been successfully used on scrubber modules, exit ducts and stacks in fossil-fueled power plants.


What term is used to describe the temperature at which the non-crystalline portion of a polymer is transformed from a rubbery material to a brittle, glass-like material?


TDI and MDI are two types of what coating ingredient?


True or False: There is an ISO performance standard for coating systems used on offshore structures.


What type of a coating contains an acid source, a carbon source, and a blowing agent?


True or False: Metalizing has been used successfully by some organizations to protect equipment subject to immersion and intermittent immersion in fresh water.


What is the name for the unit defined as the smallest repeating structural unit of any high polymer?


High cross-link density contributes the most to what type of corrosion protection?


Where would you be likely to use woven roving?


True or False: The substrate wetting of waterborne acrylics is often inferior to the wetting achieved by solvent-borne coatings.


Linseed oil is derived from what source?


Which of the following was not cited by SSPC as a reason for developing Paint 44, Coatings for Concrete Wastewater Structures?


An elastomeric coating is most noted for what property?


ISO 12944 on corrosion protection of steel with protective coatings lists how many environmental exposure classes?


What pigment is made by both a French process and an American process?


What is the name of the contacting surfaces of joints in steel structures formed with the use of high-strength bolts?


True or False: Pigments used to make coatings must be spherical in shape.


What phrase best describes a polyaspartic coating?


The earliest, large-scale application of what coating type was conducted on the Morgan-Whyalla pipeline in Australia?


Which of the following generic coating types is a thermoplastic lacquer no longer widely used?


True or False: High-ratio calcium sulfonate alkyd coatings have been recommended as overcoating materials when it is impractical to remove lead-based paint from steel structures.


True or False: Film build is normally achieved in application of thermal-sprayed zinc coatings by slowing the travel speed of the spray gun.


True or False: Both zinc and aluminum are used as thermal spray materials for corrosion protection of steel.


A recent 5-year inspection of a lining system on a potable water tank bottom that had suffered significant soil-side corrosion in Melbourne, Australia, showed excellent performance from what lining type?


Which of the following attributes is normally not considered an advantage of vinyl ester coatings?


True or False: Amine blush is caused by UV exposure.


True or False: Some cementitious liners for repairing manholes contain chemical additives to kill bacteria that cause microbiologically induced corrosion.


Pascal Verbiest, in his recent JPCL article, “Developments in Zinc Primers for Corrosion Protection,” describes four mechanisms of corrosion resistance provided by zinc primers.


True or False: Alkali zinc silicates for cargo tank coatings cure initially by absorbing water from the surrounding atmosphere into the film.


Which coating manufacturer recently received Frost & Sullivan’s 2013 North American Protective and Marine Coatings Growth Excellence Leadership Award?


The worker blood lead level established for triggering an OSHA inspection was reduced in 2012 to what?


True or false: The main difference in properties between a polyurethane and a polyurea is the amount of hydrogen bonding.


Which of the following pigments is most stable at high temperatures (above 500°F)?


True or False: A seal coat over thermal-sprayed zinc will perform better if application is delayed until at least 30 days have elapsed so that natural oxidation can form on the zinc.


What organization recently issued a performance standard for coatings on concrete in waste treatment facilities?


Which of the following coating types might also be classified as a hybrid polyurea?


True or False? Flake-filled novolac epoxies and flake-filled novolac vinyl esters are used successfully in power plant scrubber modules, exit ducts and stacks.


True or False? Waterborne acrylic primers for steel are often formulated with inhibitive pigments such as zinc phosphate.


IR pigments are most likely to be used in what type of coating?


Medium- and long-oil alkyds cure by what mechanism?


What are the most commonly used materials for thermal spraying when it is used for corrosion protection?


True or False? Glass flake is used to make a coating more breathable.


What function does an intumescent coating perform?


True or false: OSHA recently announced a National Emphasis Program on isocyanates.


ICRI recommends how much profile in its surface preparation requirements for polymer overlays on concrete?


What organization conducted a study on identifying a coating system for bridges that would last for 100 years with minimal maintenance?


True or false? According to a study by German researchers, specifying a particular edge geometry is the most significant factor in controlling corrosion of steel edges in sea-water environments.


True or false? A recent JPCL article explains that waterborne zinc-rich epoxy primers must be three-component materials.


True or false: The prime white pigment titanium dioxide, noted for its hiding power, has also been used in its nano form to create antimicrobial coatings.


True or false? According to the Coatings Encyclopedic Dictionary, the volatile portion of the liquid vehicle of a coating is called the binder.


True or false? Inorganic zinc pre-construction primers for shipbuilding normally have more zinc content than inorganic zinc primers applied after fabrication.


True or false: If a zinc-rich primer has a silicate binder, it is classified as an inorganic rather than an organic zinc-rich.


The acronym TSP stands for “Total Suspended Particulate,” as well as for what well-known material in coating work?


What U.S. organization has done preliminary research on developing a 100-year life coating?


True or False: A two-component epoxy is a thermoplastic coating.


What is the relationship between the terms “curing agent” and “hardener?”


An oil-modified polyurethane is sometimes called by what name?


True or false: The amount of chalking of a paint film can be affected by the choice of both pigment and binding medium.


True or false: Zinc phosphate pigments, when used in primers for steel substrates, provide sacrificial protection of the metal.


Coatings for faying surfaces require what special performance property?


What occurs with leafing of a coating?


True or false: A hygroscopic compound tends to repel water.


An alkyd is a modified form of what other resin?


By what mechanism does an acrylic latex cure?


True or false: All metals can theoretically be used to provide sacrificial protection in coatings.


FEVE is used in what resin technology?


True or false: A polyaspartic coating can be classified as a hybrid polyurea.


True or false: Polysiloxane coatings are isocyanate-free.


Rooted in the dawn of the Automobile Age, DuPont Performance Coatings has a new name. What is it?


What association in the U.S. now deals with the science and technology of formulating and making paint?


What is the main feature of zinc that allows it to provide cathodic protection to steel?


An Atlas Test Cell is normally used to test the performance of what kind of coating material?


In a “Rapid Deployment” bridge painting scheme, what kind of coating system is normally used?


Anatase and rutile are mineral forms of what pigment?


Which of the following binder types is inorganic?


High Ratio Calcium Sulfonate Alkyds are touted by some technologists for what kind of service?


Which of the following factors can influence the durability of barrier protection from a coating?


What is the name of the association for high performance elastomeric technologies?


What company recently sold its performance coatings business?


Which of the following coating companies was not acquired by PPG in the last several years?


What kind of concrete sealers penetrate the pores of the concrete and form little if any film build?


Cashew nut shell liquid is the source for what type of coating raw material?


True or false: Inorganic zinc-rich coatings are appropriate for use on slip-critical surfaces of steel joints.


What is a fingerprint analysis of a coating?


True or false: Geotextiles combined with coatings are sometimes used for service in open concrete tanks.


Adopted in 2001 by the International Maritime Organization, the International Convention on the Control of Harmful Anti-fouling Systems on Ships prohibits the use of tributyltin (TBT) antifouling coatings. When did the Convention go into effect in the United States?


Of the following selections, which one describes a use of calcium borosilicate in coatings?


True or false: An industrial floor coating containing 50 percent bio-based material was recently introduced.


How many coating and lining systems are called out in JPCL’s 2012 Coating Systems Buying Guide?


True or false: Cool roofs in colors other than white can achieve solar reflectance.


True or false: Primers and topcoats used with intumescent, fire-resistant coatings, as well as the intumescent coatings themselves, require UL approval.


True or false: If a zinc-rich coating has a silicate binder, it is classified as an organic zinc-rich.


Platey pigments contribute to what mechanism of corrosion protection?


Which one of the following coatings is likely to see use in a flue-gas desulfurization unit?


A three-year study by the U.S. Bureau of Reclamation found which type of coating to be most effective at combating macro-fouling organisms like zebra and quagga mussels?


True or false: Thermoplastic powders can be applied by thermal spraying.


Nanoparticles of what pigment can be incorporated into outdoor building materials, such as paint or concrete, to reduce smog?


True or false: Intumescent, fire-resistive coatings cannot be applied with plural-component spray equipment.


When a piece of metal is covered with an impervious oxide in order to inhibit chemical or electrochemical reactions on the surface, what is this process called?


Among the various types of anti-foulings for ships, what are foul-release coatings?


In its Technology Guide on the subject, what type of coating material does SSPC recommend for repairing imperfections in galvanized, organic zinc-, or inorganic zinc-coated steel?


Which of the following are platey pigments?


True or false: Portable UV curing machines are now used to cure some coatings on concrete floors.


At age 75, the Golden Gate Bridge still sports its original signature hue. What is the official name of that color?


True or false: Tributyltin is the main biocide used in formulating antifouling coatings.


Acicular, fibrous, and nodular are terms used to describe what pigment property?


Fluoropolymer coatings have what advantage when used as coatings on water tank exteriors?


What type of coating combats corrosion mainly by preventing moisture and oxygen from reaching the steel surface?


Which of the following is a hybrid polyurea?


True or false: Cyclic corrosion testing of protective coatings in the laboratory is now considered a better indicator of field performance than the traditional salt fog test, ASTM B 117.


What is the common chemistry in all polysiloxane coating types?


In reporting sales volumes, the Department of Commerce classifies protective and marine coatings under what larger heading?


What is the most appealing property of fluoropolymer coatings for bridge and tank applications?


True or false: In multi-coat systems, it is not always the case that the higher the zinc loading in a zinc rich primer, the better the system performance will be.


What is the best way to describe a polyaspartic coating?


Ion exchange pigments would most likely be used in what application?


Which of the following statements about mixing two-component coatings is not true?


True or false: Moisture-cured, single-pack polysiloxanes have been developed and are now on the market.


What animal provides the bristle for China bristle paint brushes?


True or false: Epoxy novolacs achieve excellent chemical resistance through extremely high cross-link density.


True or false: According to testing reported by Dudley Primeaux, properly formulated aliphatic polyurea coatings provide UV stability for their elastomeric properties but not for color and gloss retention.


True or false: For high heat exposure and resistance to chemicals, except fluorine, potassium silicate polymer concretes are a good choice.


True or false: Polyurethanes were developed about 75 years ago by Dr. Otto Bayer and colleagues at IG Farben in Germany.


True or false: Vinyl ester resin systems are good choices for secondary containment dikes where chemicals are stored.


True or false: Fusion-bonded epoxy coatings are cured by UV light.


True or false: Organic zinc-rich coatings are sometimes recommended for the repair of damaged areas on galvanizing and inorganic zinc-rich-coated steel.


Crack-bridging is normally associated with what type of coating?


What do Sigma Kalon, Keeler & Long, and Ameron have in common?


What general name is given to a coating that responds with corrective measures when corrosion is detected beneath it?


What is an exempt solvent?


Painted-on solar cells that can convert light to energy, as developed at Notre Dame University recently, have what main drawback?


What is the association focused on the global thick film high performance elastomer industry?


True or false: Hybrid alkyd coatings containing both water and oil are now available for industrial maintenance applications.


True or false: The color options available when anodizing aluminum are more extensive than those available with paint.


True or false: Inorganic zinc pre-construction primers for shipbuilding normally have more zinc content than inorganic zinc primers applied after fabrication.


In what type of coating would you be most likely to find ammonium polyphosphate?


Which of the following coating types is an inorganic/organic hybrid?


Why are chlorinated rubber and vinyl coatings no longer widely used in the U.S. as protective coatings?


Which of the following attributes is not normally considered an advantage of vinyl ester coatings?


What is the effect of air temperature on the pot life of a two-component coating?


True or false: Despite their higher cost, polysiloxanes and fluorourethanes are sometimes specified for water tank exteriors.


True or false: Coating manufacturers no longer recommend coal tar epoxy coating systems.


True or false: Fusion bond epoxy (FBE) coating is widely used to protect structural steel in power plants.


When can you safely topcoat an inorganic zinc rich coating?


Which of the following is classified as a sacrificial anti-graffiti coating material?


Which of the following generic types of coatings has the most heat resistance?


True or false: Fluoropolymer coatings are routinely used as topcoats on bridges in Japan.


Which of the following has been banned as an ingredient in antifouling coatings on ocean-going vessels?


What are the most commonly used thermal spraying materials for corrosion protection of steel?


Prior to the widespread understanding of their negative health effects, what is the main reason that lead pigments were widely used in protective coatings?


True or false: In a broad sense, any polymer used as a basic material for coatings is called a resin.


True or false: The threat of mud cracking in highly pigmented paints applied at high film builds is likely to be diminished in coating films that employ spherical pigments.


True or false: Glass flake is sometimes used in coatings to make them more permeable.


Micaceous iron oxide is a pigment providing what kind of properties to protective coatings among the choices listed?


True or false: Two- and three-coat epoxy systems are often recommended for ships' ballast tank linings.


Which of the following solvents is not a hydrocarbon type?


What is the most commonly used material for thermal spraying when it is used for corrosion protection?


What polymer concrete resin is based on an alcohol derived from agricultural wastes such as rice and oat hulls and corn cobs?


The epoxy curing agent phenalkamine is derived from what source?


Which one of the following generic coating types protects steel from corrosion by sacrificial action?


When you add non-exempt solvents as thinners to a high solids coating, what happens to the VOC content?


Which of the following statement about mixing two-component materials is not true?


When did the South Coast Air Quality Management District (CA) issue its latest version of Rule 1113, which covers coatings for industrial structures in the field?


Sacrificial protection refers to which of the following?


How can paint be made conductive for electrostatic spraying?


In a corrosion cell, where does the corrosion occur?


On a coatings’ product data sheet, what does “theoretical coverage” mean?


True or false: Any kind of metal can be used in coatings for sacrificial protection of steel.


True or false: Novolac epoxies and polymer concretes are sometimes selected as flooring systems over concrete for resistance to chemicals.


Cashew nut shells are the source of what coating ingredient?


Which of the following types of coatings are normally used on the faying surfaces of steel joints?


True or false: Weatherable fluoropolymer coatings for bridges and tanks are available only in solvent-borne formulations.


Pittsburgh's Birmingham Bridge has appeared on two JPCL covers: May 2011 and an earlier issue, after 10 years of service. What was the year of the original cover?

Clue: The coating system has never been replaced.


True or false: The SSPC standards SSPC-Paint 20 and SSPC-Paint 29 contain both performance and composition requirements for zinc-rich coatings.


Which of the following polyurethane types tends to yellow in sunlight?


True or false: Titanium dioxide is mainly an anti-corrosive pigment.


ICRI recommends how much surface profile in its surface preparation requirements for polymer overlays on concrete?


True or false: A universal primer has the same function as a wash primer.


True or false: zinc and magnesium can be used as sacrificial metals for the galvanic protection of steel.


What is another name for a curing agent that aids and participates in the cure of a coating film by chemical reaction?


What type of coating contains an acid source, a carbon source, and a blowing agent?


What is mica?


Cuprous oxide is sometimes used in what types of coatings?


True or false: Coatings with a high degree of internal stress should be used for overcoating an existing coating to extend its lifetime.


Chlorinated rubber coatings are no longer used in most applications. What is the main reason?


True or false: Delamination is not normally a significant risk when overcoating an existing coating material.


Cross-link density, use of platey pigments, and thick films contribute to what mechanism of corrosion protection in a coating?


True or false: ANSI/NSF 61 addresses coatings performance issues as well as the health effects of coatings for potable water tanks.


Infrared reflective (IR) pigments are most likely to be used in what functional type of coating?


What name is sometimes given to a coating system comprised of galvanizing together with an organic coating?


The term “mastic,” as in epoxy mastic, often refers to what characteristic?


What type of material is normally used to create a sacrificial anti-graffiti coating?


True or false: The “workhorse” coating for protecting sheet piling, specified by the US Army Corps of Engineers and other owners, is coal tar epoxy.


How are low-VOC coatings created?


What kind of coatings are normally used on the faying surfaces of slip-critical joints?


What is the name given to the pressure caused by differences in concentration of solution on each side of a semi-permeable membrane?


True or false: Moisture-cured polyurethanes are single-component materials.


Which of the following factors can influence the durability of barrier protection from a coating?


True or false: If a zinc-rich coating has a silicate binder, it is classified as an organic zinc-rich.


What US organization has done preliminary research on developing a 100-year life coating?


Which of the following are lead- and chromate-free inhibitive pigments?


True or false: For metal substrates, infrared-reflective (IR) pigments make it possible to use dark colors on cool roofs.


True or false: Primers and topcoats used with intumescent, fire-resistant coatings, as well as the intumescent coatings themselves, require the approval of Underwriters Laboratories.


 
 
   

**Commercial white papers, product videos, and other sponsored documents posted on this site are paid content from third-party companies; inclusion and posting on this site does not imply an endorsement nor recommendation of the content by Technology Publishing/PaintSquare. By signing in and viewing or downloading this paid content, you agree to make your name and full contact information available to the sponsor of the content.

International Paint LLC

International Paint Engineered Coatings

Learn about our solutions for:
  • Structural Steel
  • Piping & Equipment
  • Storage Tanks
  • Pressure Vessels
  • Secondary Containment


    BASF
    New resins from BASF will have metals loving water:

    Excellent corrosion resistance, low VOC, high gloss, thin films basf.us/industrialcoatings
    polyorders@basf.com
    800-231-7868


    Wasser High-Tech Coatings Inc.
    Wasser Coatings Protect

    Wasser Coatings offer a complete range of Moisture Cure Urethane (NEPCOAT approved) systems in addition to Polyurea membranes and linings(NSF).
    www.wassercoatings.com


    Carboline Company
    Hyrdrocarbon Fire & Jet Fire Protection

    Pyroclad X1 is the latest breakthrough in epoxy based intumescent fireproofing technology


    Polyval Coatings
    Polyflex® Polyurea Linings

    Polyflex ™ new Polyurea Geotextile Membrane System has been specifically engineered to protect the environment in containment applications.
    www.polyflexlinings.com


    Sherwin-Williams
    Heat-FLex® Hi-Temp 1200

    Improved Corrosion
    Resistance
    Enhanced Durability
    Faster Shop Throughput


    Mitsubishi Gas Chemical America
    Performance Amine 1,3-BAC

    A highly reactive cycloaliphatic diamine offering superior performance. Reasonable cost and curing efficacy makes it suitable for all types of epoxy resin applications.


    Mohawk Garnet
    Mohawk Garnet™ – North American Hard Rock

    Rough around the edges – which is what you want in your abrasive. More information at 1.866.642.7638 or info@mohawkgarnet.com


    WINOA Group
    W Abrasives : Bullets for cost killers

    WA COST is the right solution for cost killers who want to reduce their blasting costs. Visit us during the GIFA (Hall15 - D14).

  •  
    Technology Publishing

    The Technology Publishing Network

    The Journal of Protective Coatings & Linings (JPCL) PaintSquare
    Durability + Design Paint BidTracker

     
    EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
    REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
    MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
     

    © Copyright 2000-2015, Technology Publishing / PaintSquare, All rights reserved
    2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com