PaintSquare.com


The First Word in Protective & Marine Coatings

A Product of Technology Publishing / PaintSquare
JPCL | PaintSquare News | Durability + Design | Paint BidTracker

The PaintSquare Guide to Soluble salts

| More

Daily Quiz (18)

All content matching this tag

What is the name of the method for measuring soluble salt conductivity on steel before painting by applying a special patch to the substrate, injecting deionized water beneath it, and then extracting the water to assess its conductivity?

Wednesday, May 28, 2014


True or false: A Bresle patch is used to treat dynamic cracks in concrete, especially in secondary containment structures around tanks.

Monday, February 17, 2014


What is the name of the test for measuring soluble salt concentrations on steel surfaces prior to painting by applying a special patch to the substrate, injecting deionized water beneath it, and then extracting the water to measure its conductivity?

Monday, October 21, 2013


What instrument would you use to analyze soluble salt contamination on abrasives?

Thursday, September 19, 2013


True or False: Maximum levels of soluble salts that can remain on a steel substrate after surface preparation are mandated in SSPC-Guide 15 and ISO 8502.

Friday, September 6, 2013


ISO standard 8502, in Parts 5, 6, 9, and 12, is similar in content to what SSPC Guide?

Friday, September 6, 2013


Which of the following is a recognized method for removing soluble salts from a steel substrate to test concentration levels?

Monday, July 29, 2013


True or false? The contractor is responsible for field testing for oil and soluble salt contamination of new mineral and slag abrasive media before use.

Friday, May 24, 2013


True or false: Ultra-high-pressure (UHP) water jetting is generally ineffective in removing soluble salts from steel substrates.

Tuesday, February 26, 2013


Which of the following cleaning techniques is most likely to remove soluble salts from a heavily pitted steel surface?

Wednesday, January 2, 2013


In its Technology Update on retrieving soluble salts from a steel substrate in the field, SSPC describes two methods. One is swabbing; what is the other?

Monday, December 17, 2012


Which technique would be least likely to remove soluble salts from a steel substrate?

Tuesday, October 25, 2011


Which of the following cleaning techniques is least likely to remove soluble salts from a steel surface?

Monday, August 8, 2011


Dried salt deposits on a brick exterior (see photo), resulting from moisture leakage through a wall, are called what?

Tuesday, July 19, 2011


In its Technology Update on retrieving soluble salts from a steel substrate in the field, SSPC describes two methods. One is swabbing; what is the other?

Monday, March 21, 2011


A crust of soluble salts, commonly white, deposited on the exterior of masonry facades, such as brick, is called what?

Tuesday, January 4, 2011


True or false: Soluble salts on a substrate beneath a coating can draw moisture through the coating and contribute to the formation of blisters.

Wednesday, November 10, 2010


True or false: Some coatings that perform poorly in the accelerated salt spray test (ASTM B 117) may provide good service in outdoor exposures.

Friday, August 20, 2010


**Commercial white papers, product videos, and other sponsored documents posted on this site are paid content from third-party companies; inclusion and posting on this site does not imply an endorsement nor recommendation of the content by Technology Publishing/PaintSquare. By signing in and viewing or downloading this paid content, you agree to make your name and full contact information available to the sponsor of the content.

   

CHLOR*RID International Inc.
Free Webinar

Learn about soluble salts, along with a discussion on allowable levels.
More information at
www.chlor-rid.com,

800-422-3217


HoldTight Solutions Inc.
NO FLASH RUST -
NO CONTAMINANTS

Our HoldTight®102 salt remover & flash rush inhibitor prevents flash rust by removing surface contaminants.
Contact us for your nearest distributor. (800) 319.8802 sales@holdtight.com


US Minerals
US Minerals -
Black Magnum

With nationwide production and distribution capabilities, U.S. Minerals supplies a complete range of coal slag and other abrasives to meet all of your blasting needs.


Armakleen Company, The
No Ordinary Soda

ARMEX® baking soda-based abrasives from the makers of ARM & HAMMER® products offers over 12 formulas specially engineered for your application and your budget.


EDCO - Equipment Development Co. Inc.
American Manufacturing

Is coming back, is more competitive, and is higher
in quality. Well EDCO never left, we never lost our competitiveness, and we
have always maintained
our high level of quality.
Call 800-638-3326 or visit
us @ edcoinc.com


Van Air Systems
The Blast Pak

Van Air Systems' portable desiccant air dryer. Get dry compressed air with this All-In-One blasting and coating solution.


Polyval Coatings
POLYFLEX brand Polyurea

high chemical resistant membranes are used extensively to protect our environment in secondary containment applications.

 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker JPCL Europe

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2000-2014, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com