PaintSquare.com
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 

 

Problem Solving Forum (30)


What type of material should I use to achieve bright, bold colors that will last on a concrete floor with heavy foot traffic?


When coating an aged concrete floor, how should one determine the correct sequence of surface preparation among the options of pressure washing and grinding or other concrete removal and roughening methods?


What are the pros and cons of using shotblasting to remove a coating system from a concrete floor?


How do you prepare an oil-stained, bare concrete floor for coating?


Is there a quick way to determine the validity of a claim of “extreme durability” for a new concrete floor coating material exposed to heavy foot traffic?


What type of material should I use to achieve bright, bold colors on a concrete floor that gets heavy foot traffic?


We’re converting a grocery store into a motorcycle dealership. Should we polish the concrete floor or coat it? The concrete seems in fair shape, from what we can see under the dried mastic where the old vinyl tiles have been removed.


Is a sealer coat always required for coating systems applied to concrete surfaces that will be exposed to marine environments?


Which factors are most important in selecting coatings for new concrete?


What tests should be run to determine if an existing concrete bridge pier needs rehabilitation or repair before cleaning and coating?


RH probes are commonly used in concrete floors to determine moisture content. Can they be used in CMU walls or pre-cast walls?


What is the optimal moisture content for masonry before painting can begin?


When applying a 100% solids, fast-curing polyurea coating on concrete, what is the best method for verifying that the proper thickness has been applied?


Which factors are most important in selecting coatings for new concrete?


What is an acceptable level of moisture in concrete walls before painting with an acrylic system, and how should the moisture level be measured?


Can lightweight block (CMU) be successfully coated to prevent water intrusion, or is it best to build with standard weight?


How do concrete admixtures such as hardeners and anti-dust compounds affect coating adhesion? What can be done to minimize negative effects?


What is the best way to assure compliance with specified dry film coating thickness requirements on vertical concrete?


When animal fat in slaughterhouses penetrates concrete surfaces, how do you identify and remove the contamination before coating the concrete?


What is the best method of testing for moisture content in concrete masonry unit (CMU) walls before application of coatings?


What’s the best way to determine if a cementitious-based mortar used to repair exterior concrete is ready to be coated?


We’re converting a grocery store to a motorcycle dealership. Should we polish the concrete floor or coat it? The concrete seems in fair shape, from what we can see under the dried mastic where the old vinyl tiles have been removed.


I need to coat a bare concrete warehouse floor that has visible oil stains. What are my options for cleaning the concrete before coating it?


What is the best way to protect an exposed concrete foundation?


Zinc metalizing has been applied to concrete surfaces to provide cathodic protection to rebar in the concrete. What are the problems, if any, with applying zinc metalizing to concrete, and what is the best approach to addressing them?


How do you determine the best type of paint to use when repainting a block or concrete building?


Which factors are most important in selecting coatings for new concrete?


When applying a 100% solids, fast-curing polyurea coating on concrete, what is the best method for verifying that the proper thickness has been applied?


How is it possible to determine if concrete is sound enough to receive a thick-film coating?


How do I determine when a cementitious-based mortar used to repair exterior concrete is ready to be coated?


 
 
   

**Commercial white papers, product videos, and other sponsored documents posted on this site are paid content from third-party companies; inclusion and posting on this site does not imply an endorsement nor recommendation of the content by Technology Publishing/PaintSquare. By signing in and viewing or downloading this paid content, you agree to make your name and full contact information available to the sponsor of the content.

Advertisements
 
Detail Masters
 
Overspray Removal
 
We offer professional, turnkey service and unparalleled quality!
Our process can save hundreds— even thousands of dollars. It's fast, environmentally safe and 100% guaranteed.
 

 
SAFE Systems, Inc.
 
Enduroguard -
The Tough Cable
for a Tough Industry.
 
Reduce maintenance costs and down time, increase job site safety with Enduroguard Cable. Available exclusively from SAFE Systems. UL listed, flexible, abrasion resistant and cut resistant.
 

 
Industrial Vacuum Equipment Corp.
 
Hurricane Vacuums
& Dust Collectors
 
Vacuum and dust collector hose, filters and related accessories.
IndustrialVacuum.com
 

 
SEMicro Division, M.E. Taylor Engineering, Inc.
 
Coatings Adhesion Testers
 
The PATTI® accurately measures the bond strength between coating & substrate. Outfitted properly, the surface can be rough, porous, or curved & >10K psi strong!
 

 
HoldTight Solutions Inc.
 
NO FLASH RUST - NO CONTAMINANTS
 
Our HoldTight®102 salt remover & flash rust
preventer prevents flash
rust by removing surface contaminants. Contact us
for your nearest distributor.
(800) 319.8802 sales@holdtight.com
 

 
Monti Tools, Inc.
 
BRISTLE BLASTER® – THE ORIGINAL ONE
 
  • Abrasive blast with a power tool
  • Remove corrosion, mill scale and coatings
  • Cleans & roughens
  • Meets SSPC-SP 10 / NACE No. 2
  • Profile up to 4.7 mils
  • ATEX Zone 1
  •  

     
    Clemco Industries Corp.
     
    Maximum Dust Suppression Systems Start at $14,950
     
    The system comprises proven technology and equipment with user-friendly flexibility in mind. See it in action.
     

     
    US Minerals
     
    Hit Harder. Clean Faster.
     
    Black Diamond abrasive products are the toughest, most effective blasting media and supply the superior power you need to get any job done.
     

     
    Corrosion Probe, Inc.
     
    From Detection to Correction
     
    Corrosion Probe, Inc. has the Most Concrete Coatings Experience and Expertise. Contact us today at
    860-767-4402, www.cpiengineering.com
     

     
    Montipower, Inc.
     
    The MBX Bristle Blaster
     
    Get a 2.7 to 3.3 mil profile and a Near White Metal Clean. For info visit www.mbxit.com or call 877 629-8777
     

     

    Technology Publishing Co., 2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951

    TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@paintsquare.com


    The Technology Publishing Network

    Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

     
    EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
    REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
    MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us