PaintSquare.com
      | Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise
  

 

 

Problem Solving Forum (6)


How many times can a building be repainted before the paint becomes too thick to perform properly?


What is the best method for preparing newly galvanized steel to be overcoated with an epoxy system?


Can fluoropolymer coatings that are still very glossy be overcoated (if, for example, the topcoat is losing color or the color needs to be changed)? If so, what type of coating can be used, and what surface preparation is required?


Can fluoropolymer coatings that are still very glossy be overcoated (if, for example, the topcoat is losing color or the color needs to be changed)? If so, what type of coating can be used, and what surface preparation is required?


When performing maintenance painting of tank coatings, what are the pros and cons of overcoating an existing lining that appears to be in good condition?


Specifications often state that glossy surfaces must be dulled before overcoating. What are some methods for doing this, especially when sanding isn’t feasible or desirable?


 
 
   

**Commercial white papers, product videos, and other sponsored documents posted on this site are paid content from third-party companies; inclusion and posting on this site does not imply an endorsement nor recommendation of the content by Technology Publishing/PaintSquare. By signing in and viewing or downloading this paid content, you agree to make your name and full contact information available to the sponsor of the content.

NLB Corporation
Water jet surface prep, high or low

See how quickly HydroPrep® tools do surface prep, with no containment needed. Choose automated Crawler for overhead, Vortex™ for floors, or handheld VertaJet™.


BASF
New resins from BASF will have metals loving water:

Excellent corrosion resistance, low VOC, high gloss, thin films basf.us/industrialcoatings
polyorders@basf.com
800-231-7868


Abrasives Inc.
Check our Prices for Blast Abrasives

Faced with higher abrasive costs? We invite you to call & check our rates on Black Magic® coal slag and other quality blast materials. Abrasives Inc. 800-584-7524


Elcometer, Inc.
Elcometer 106 Pull-Off Adhesion Tester

Portable, easy to operate; Provides numerical value for adhesion; Comes in carrying case - Ideal for site tests; No power supply necessary.


Mohawk Garnet
Mohawk Garnet™ – North American Hard Rock

Rough around the edges – which is what you want in your abrasive. More information at 1.866.642.7638 or info@mohawkgarnet.com


Advanced Recycling Systems
ADVANCED RECYCLING SYSTEMS (ARS)

Recycling Machines, Dust Collectors, Rapid Deployment units are time-tested and approved for the rugged industrial environment. Contact ARS today!
(330)536-8210


Minerals Research & Recovery

HIGH PERFORMANCE ABRASIVES


“Made in the USA!”

Why recycle waste from other countries? Go FASTER, CLEANER, at 1/3 THE COST with MR&R “All-American” Sharpshot®HP!!

WATCH THE VIDEO


HoldTight Solutions Inc.
NO FLASH RUST -
NO CONTAMINANTS

Our HoldTight®102 salt remover & flash rush inhibitor prevents flash rust by removing surface contaminants.
Contact us for your nearest distributor. (800) 319.8802 sales@holdtight.com

 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2000-2015, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com