| Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise



Daily Quiz (21)

True or false: An Atlas Cell Test is normally used to test the performance of concrete floor coatings.

An Atlas Test Cell is normally used to test the performance of what kind of coating material?

True or false: ISO Sa2.5, describing very thorough abrasive blast cleaning, gives a less comprehensive written description of the end condition of the steel after blasting than SSPC SP 10/NACE No. 2, Near white metal, which requires a similar end condition.

An Atlas test cell is normally used to test the performance of what type of coating material?

True or false: SSPC/NACE surface preparation specifications for masonry surfaces explicitly define acceptance criteria.

Which one of the following organizations does not train and certify coating inspectors?

SSPC and NACE have how many joint standards on waterjet cleaning of metals?

True or False: SSPC and NACE jointly publish a standard on applicator training and certification for commercial painters.

True or false: Some of SSPC’s surface preparation standards are not published jointly with NACE.

True or False: Like their counterparts for steel, there are four SSPC surface preparation standards describing the end condition of concrete after cleaning.

SSPC/NACE standards for waterjet cleaning describe how many levels of cleanliness?

What organization has developed a method for measuring and replicating concrete surface profile using replica putty?

What organization created and sells rubber replica templates for determining the surface profile of concrete?

The Norwegian association FROSIO has what in common with NACE and SSPC?

Who was Executive Director of NACE International from 1952-1987?

SSPC jointly publishes with NACE and the American Welding Society a specification on what subject?

What is the critical corrosion temperature range for carbon steel under insulation that a coating must withstand, according to NACE?

The SSPC/NACE/AWS specification for thermal-sprayed zinc in a marine service environment requires what degree of blast cleaning?

The ISO surface preparation standard Sa 3 most closely resembles what SSPC/NACE surface preparation standard?

Name the noted coating specialist who helped develop zinc-rich coatings technology, wrote an important book on corrosion control by coatings, was a NACE president, and was also president of Ameron Coatings.

True or false: NACE was founded before SSPC.


Nationwide Overspray
Profession Overspray Removal Services

The Finest Name in Safe Overspray Removal. We specialize in removing all contaminants from any surface. Family Owned and Operated for 33 years! Fully insured. Satisfaction is guaranteed.

Graco Inc.
Graco Mortar Pump

The M680 sprays epoxy-based mortars, anti-skid coatings, cementitious and filled materials. Compact.
Easy to use.
Call 877-844-7226 or

SSPC: The Society for Protective Coatings
SSPC 2016 Register Now!

SSPC2016 is earlier this year, don't forget to book your plane tickets and hotel. See you soon. For more information visit

Sherwin-Williams Protective & Marine Coatings

With 4,000 distribution points and 3,700+ years of experience, Sherwin-Williams delivers the products, support and expertise you need, right where you need it.

Julbert, Inc.
Built from the ground up.

Dust Collectors Available!
We deliver to your Jobsite!
Built Tough! Priced Right!
PH: 208-437-2100

New resins from BASF will have metals loving water:

Excellent corrosion resistance, low VOC, high gloss, thin films

GMA Garnet USA
GMA Garnet™
Natural Abrasives

- Superior cleaning
- Even Profile
- Low Dust
- Cost-Effective
- Environmentally friendly
- Recyclable up to 5 times
Tel : +1 832 243 9300

Thermion Inc
Buy Back Program

We are offering $5,000
credit for your old Model
This drive system is
being discontinued by
the manufacturer.
More information at

Commercial Sand Blasting & Painting Ltd.
Reliable Service & Superior Workmanship

We’re ready to meet any of your protective coating and lining needs. We can work on your site or in our facilities, with large shops (60,000 sq ft), 40 acres of yard space, and cranes and forklifts on site.

Atlantic Design, Inc.

to see what we did to this dust collector! ADI can increase the efficiency and life of your equipment! Any brand, for less than new! 866.Call.ADI

Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker

EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us

© Copyright 2000-2015, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail