PaintSquare.com
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 

 

Daily Quiz (40)


True or false: Moisture-cure polyurethanes are sometimes used to create organic zinc-rich coatings.


True or false: According to a recent D+D In Depth article, coatings utilizing polyurethane resins are the leading polymer technology in the coatings industry.


Polyurethanes are formed by the reaction of an isocyanate with a hydroxyl-containing substance. What is another name for this hydroxyl-containing substance?


True or false: Waterborne polyurethane coatings are sometimes called “waterglass.”


True or false: A clear polyurethane used to seal a coated concrete surface should exhibit maximum turbidity.


True or false: Acrylic, silicone, and polyurethane coatings are among the types sometimes specified as roof coatings over spray polyurethane foam.


A variation on polyurethane coating chemistry that allows for faster curing times and higher film builds has what name?


Which of the following polyurethane types tend to yellow in sunlight?


What type of polyurethane yellows and chalks in direct sunlight?


True or false: Oil-modified urethanes, or uralkyds, are chemically curing materials.


True or false: Aromatic polyurethanes are designed mainly for indoor applications.


True or false: High-performance polyurethanes, polyaspartics, polysiloxanes, and fluoropolymers are best bets to retain gloss and color for long periods in atmospheric exposure.


True or false: Direct-to-metal polyurethane coatings are available in waterborne formulations.


Which of the following isocyanates is used in polyurethane coatings?


True or false: A uralkyd is a moisture-cured polyurethane.


True or false: Closed-cell, spray-applied polyurethane foam can be used as insulation but not as an air barrier.


True or False: Common factory-applied finishes over hot-dipped galvanized steel include polyester, acrylic, fluoropolymer, plastisol, and polyurethane.


Scrubbable waterborne polyurethanes for use on walls in hospitals are available in a matte finish.


Which of the following polyurethane types tends to yellow in sunlight?


In coatings, “American process” and “French process” refer to the creation of what material?


True or false: A zinc silicate primer is classified as an organic zinc-rich primer.


True or false: Aromatic polyurethanes exhibit better weathering properties than aliphatic polyurethanes.


Polyurethanes are formed by the reaction of an isocyanate with a hydroxyl-containing substance. What is another name for this hydroxyl-containing substance?


What is the relationship between a polyol and a polyalcohol?


TDI and MDI are two types of what coating ingredient?


What resin chemistry is suitable for development of coatings that can be successfully applied to stucco?


True or false: The main difference in properties between a polyurethane and a polyurea is the amount of hydrogen bonding.


What type of isocyanates contribute to strong UV resistance in polyurethane coatings?


True or false: Aliphatic polyurethanes exhibit gloss and color retention better than aromatic polyurethanes.


An oil-modified polyurethane is sometimes called by what name?


True or false: Aliphatic polyurethanes tend to retain color and gloss better than aromatic polyurethanes.


What is the alpha-numeric designation of the recently published SSPC standard describing recommended best practice in applying plural component polyureas and polyurethanes?


True or false: Polyurethanes were developed about 75 years ago by Dr. Otto Bayer and colleagues at IG Farben in Germany.


A variation on polyurethane coating chemistry that allows for faster curing times and higher film builds has what name?


True or false: Single-component polyurethane coatings are always waterborne.


Which of the following polyurethane types tends to yellow in sunlight?


True or false: Polyurethanes formulated with aromatic polyisocyanates tend to have very strong weathering capabilities.


True or false: Aromatic polyurethanes tend to retain gloss and color better than aliphatic polyurethanes


True or false: A clear polyurethane used to seal a coated concrete surface should exhibit maximum turbidity.


True or false: Polyurethane topcoats usually have good abrasion resistance.


 
 
   

**Commercial white papers, product videos, and other sponsored documents posted on this site are paid content from third-party companies; inclusion and posting on this site does not imply an endorsement nor recommendation of the content by Technology Publishing/PaintSquare. By signing in and viewing or downloading this paid content, you agree to make your name and full contact information available to the sponsor of the content.

Advertisements
 
Strategic Materials Inc.
 
Crushed Glass Abrasives
 
TruAbrasives™, a clean crushed glass abrasive superior to other abrasives for performance, health, and environmental benefits.
 

 
SEMicro Division, M.E. Taylor Engineering, Inc.
 
Coatings Adhesion Testers
 
The PATTI® accurately measures the bond strength between coating & substrate. Outfitted properly, the surface can be rough, porous, or curved & >10K psi strong!
 

 
SAFE Systems, Inc.
 
Custom blast rooms
by SAFE Systems
 
Don't waste time and money "making do" with a "standard" design. Let us work with you to design and build the system that best fits your requirements.
Call 1-800-634-7278
 

 
SABRE Autonomous Solutions
 
Repeatability
 
The ALPHA1 provides reliable results consistently allowing you to cost your next job with confidence.
 

 
Absolute Equipment/Grand Rental Station
 
TIER 4 EQUIPMENT
 
We have Tier 4 Equipment including Air Compressors & Generators for Sale & Rent! Your job may now require Tier-4. www.absoluteequip.com or Call 412-931-6655.
 

 
Termarust Technologies
 
Termarust (HR CSA) Chemically Stops
Active Corrosion
 
Arch truss treated with Termarust's (HR CSA) in 2003. This steel arch bridge is rust free on all surfaces including the crevice corroded joints and connections.
 

 
W Abrasives
 
Premium Products for your Blasting Needs
 
Ready to use operating mix steel grit abrasives developed specially for air blasting applications.
 

 
Safway Services
 
Safeguard Assets. Ensure Productivity. HAKI®
 
Protect assets and equipment. Keep facilities open and operational. Maintain schedules regardless of weather. Ensure smooth and continuous production. Easy to erect. Safway is the primary distributor of HAKI® products including HAKISPAN and HAKITEC® 750 – in North America.
 

 
Novatek Corporation
 
Novatek Corporation, Dustless Coatings Removal
 
Strip, clean and profile all dust free! Comply with new lead standards. Contact today: (866) 563-7800
 

 
KTA-Tator, Inc. - Corporate Office
 
KTA-TATOR LABORATORY SERVICES
 
• Coating failure analysis
• Independent testing
• Accelerated weathering testing
• Abrasives Testing
• Oil & Gas Material Qualification
• A2LA Accredited
Contact: Rob Leggat at
412-788-1300 x180
 

 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@paintsquare.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us