PaintSquare.com
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 

 

Daily Quiz (38)


The U.S. Army Corps of Engineers has developed waterborne epoxy coatings that exceed the performance of high-VOC coatings that were traditionally used for locks and dams.


True or false: Fusion-bonded epoxy coatings are sometimes specified for sheet piling.


For successful application to green concrete, epoxies must be vapor-permeable and must have what other characteristic?


An epoxy curing agent is derived from what natural source?


True or false: Epoxy technology was not commercialized until the early 1960s.


What performance property of epoxy resins makes them useful as wood repair products?


True or false: Fire-resistive, intumescent coatings sometimes have epoxy and sometimes acrylic resin systems.


True or false: Flake-filled epoxy novolacs have been used to protect metal in flue gas desulfurization units.


True or false: The installed cost of thick-film resinous coating systems, such as high-build epoxies and polyureas, on concrete floors ranges from $3.50 to $7.00 per square foot, according to a recent D+D In Depth article.


What is a generic name for a hybrid coating that combines epoxy with siloxanes?


True or false: Minimal barrier protection is a major weakness of epoxy coatings.


What epoxy curing agent is made with the oil derived from a nut shell?


True or false: According to a JPCL article in 2014, high solids epoxies tend to have shorter pot lives but longer drying times than conventional epoxies.


What term is normally used to describe surface opalescence on epoxy films caused by reaction of amine co-reactant with carbon dioxide and water?


True or false: Epoxies have better alkali resistance than many other polymers.


True or false: Some epoxy coatings are formulated for application to green concrete that has cured for only 24 hours.


True or false: A silepoxy is formed by the combination of epoxy with siloxane.


True or false: A zinc silicate primer is classified as an organic zinc-rich primer.


True or false: Epoxies that are insensitive to high pH and are vapor-permeable have been developed for green concrete (concrete that has set but not fully cured).


Epoxy coatings formulated for application over green concrete (less than 28 days of cure) must withstand what special substrate conditions?


Where would you be most likely to use an epoxy novolac?


True or False? Epoxy technology was not commercialized until the 1940s.


What coating defect is caused by exceeding the recoat interval recommended by the manufacturer for an epoxy coating?


Anatase and rutile are types of what paint component?


True or False: A two-component epoxy is a thermoplastic coating.


Hybrid coatings that combine epoxies with siloxanes are called what?


What is generally considered a weakness of epoxy coatings?


True or false: Fusion-bonded epoxy coatings are cured by UV light.


True or false: Fusion bond epoxy (FBE) coating is widely used to protect structural steel in power plants.


True or false: Two- and three-coat epoxy systems are often recommended for ships' ballast tank linings.


The epoxy curing agent phenalkamine is derived from what source?


Two-component epoxy coatings cure by what mechanism?


An epoxy-modified siloxane clear coating would be classified as what type of anti-graffiti coating?


What coating defect is likely to be caused by exceeding the recoat interval recommended for an epoxy?


The term “mastic,” as in epoxy mastic, often refers to what characteristic?


The first epoxy coatings were sold in what year?


Bisphenol A is combined with which of the following to produce epoxy resins?


Which of the following generic coating types is not an alternative to polyurethane topcoats on metal substrates in atmospheric service?


 
 
   

**Commercial white papers, product videos, and other sponsored documents posted on this site are paid content from third-party companies; inclusion and posting on this site does not imply an endorsement nor recommendation of the content by Technology Publishing/PaintSquare. By signing in and viewing or downloading this paid content, you agree to make your name and full contact information available to the sponsor of the content.

Advertisements
 
SEMicro Division, M.E. Taylor Engineering, Inc.
 
Coatings Adhesion Testers
 
The PATTI® accurately measures the bond strength between coating & substrate. Outfitted properly, the surface can be rough, porous, or curved & >10K psi strong!
 

 
SABRE Autonomous Solutions
 
Safety
 
Removing blasting operators from harmful environments is our key objective.
 

 
Detail Masters
 
Overspray Removal
 
We offer professional, turnkey service and unparalleled quality!
Our process can save hundreds— even thousands of dollars. It's fast, environmentally safe and 100% guaranteed.
 

 
SAFE Systems, Inc.
 
Enduroguard -
The Tough Cable
for a Tough Industry.
 
Reduce maintenance costs and down time, increase job site safety with Enduroguard Cable. Available exclusively from SAFE Systems. UL listed, flexible, abrasion resistant and cut resistant.
 

 
Mitsubishi Gas Chemical America
 
Performance Amine 1,3-BAC
 
A highly reactive cycloaliphatic diamine offering superior performance. Reasonable cost and curing efficacy makes it suitable for all types of epoxy resin applications.
 

 
PreTox Products - NexTec, Inc.
 
GOT LEAD? Specify Pretox System products
 
The ONLY Lead Stabilizer Compatible with All Paint Removal Methods. Works with all Blast Media: Grits | Recyclable Abrasives | CO2 | Water | Power Tools | Etc. Call Dave Steffen at 800.338.8296.
 

 
HoldTight Solutions Inc.
 
NO FLASH RUST - NO CONTAMINANTS
 
Our HoldTight®102 salt remover & flash rust
preventer prevents flash
rust by removing surface contaminants. Contact us
for your nearest distributor.
(800) 319.8802 sales@holdtight.com
 

 
Bullard
 
Upgrade with the Bullard GenVX
 
Click here to learn how you can get a GenVX Helmet and Win.
 

 
DeFelsko Corporation
 
PosiTector SST Soluble Salt Tester
 
Measures the concentration of soluble salts on metal surfaces. Use with all Bresle patch types including the reusable, adhesive-free PosiPatch.
 

 
Advanced Recycling Systems
 
ADVANCED RECYCLING SYSTEMS (ARS)
 
Recycling Machines, Dust Collectors, Rapid Deployment units are time-tested and approved for the rugged industrial environment. Contact ARS today!
(330)536-8210
 

 

Technology Publishing Co., 2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@paintsquare.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us