PaintSquare.com
      | Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise
  

 

 

Daily Quiz (23)


True or false: Fire-resistive, intumescent coatings sometimes have epoxy and sometimes acrylic resin systems.


True or false: Waterborne acrylic primers for steel cannot be formulated with inhibitive pigments.


True or false: Acrylic coatings are effective as reflective roof coatings, but not as air barriers.


True or false: Acrylic, silicone, and polyurethane coatings are among the types sometimes specified as roof coatings over spray polyurethane foam.


True or false: AAMA 2605 requires 7 years of successful performance by organic coatings on aluminum substrates exposed outdoors at a South Florida test site.


True or false: Specialty acrylic polymers are sometimes added to stucco to improve its performance.


True or false: One manufacturer’s acrylic binder is said to remove formaldehyde from indoor air by converting it to water vapor.


Much of the growth of single-component water-borne acrylics for industrial maintenance has been at the expense of what other single-component maintenance coating type, according to a recent JPCL article on acrylics.


True or false: Acrylic binders are sometimes used in intumescent coatings for building interiors.


True or false: Coating materials that form films simply by solvent evaporation without chemical change are called thermoplastics.


True or False: Common factory-applied finishes over hot-dipped galvanized steel include polyester, acrylic, fluoropolymer, plastisol, and polyurethane.


True or false: Acrylics are used in reflective roof coatings, air barriers, and adhesives and sealants.


True or false: Acrylic coatings are effective as reflective roof coatings but not as air barriers.


How are acrylic polymer-based coatings used in the building envelopes of architectural structures?


True or false: A recently developed acrylic binder, when properly formulated into a coating, is claimed to remove formaldehyde from interior atmospheres by converting it into water vapor.


What resin chemistry is suitable for development of coatings that can be successfully applied to stucco?


True or False: The substrate wetting of waterborne acrylics is often inferior to the wetting achieved by solvent-borne coatings.


True or False? Waterborne acrylic primers for steel are often formulated with inhibitive pigments such as zinc phosphate.


By what mechanism does an acrylic latex cure?


According to ASTM D6083, what should be the dry film thickness of an acrylic coating used in roofing?


According to ASTM D 6083, what should be the minimum dry film thickness for elastomeric acrylic cool roof coatings?


Baked enamel coating systems based on acrylics or polyesters are most likely to fall short of fluoropolymer systems in what performance property?


True or false: One hundred percent acrylic coatings are relatively resistant to alkaline substrates such as masonry.


 
 
   

SAFE Systems, Inc.
Portable Blast &
Recovery Equipment

Trailer or skid mounted blast and recovery equipment. Systems designed for maximum versatility, environmental compliance
and overall cost savings.
Call 1-800-634-7278


NACE International, The Corrosion Society
Advance Your Coating Inspector Career

By completing the world’s most recognized program, NACE’s CIP, you’ll be better trained and qualified on inspection of surface preparation and coatings application.


N.T. Ruddock Co.

Our Abrasives Hold Up Under Pressure

N. T. Ruddock focuses on abrasive selection, equipment evaluation, equipment maintenance & reduction of abrasive consumption. Other services include Screen Analysis & Background Radiation Testing.


DRYCO
Humidity & Temperature Control Equipment

Rental Desiccant Dehumidifiers, ArcticDRY Units, Air Conditioners, Heaters and Generators to help control the climate on your next industrial painting project. Nationwide locations, 24/7 service: (866) 379-2600 www.drycogroup.com”


Dampney Co., Inc.
High Temperature White Paint

New Coating with not yellow, remains white and will withstand temperatures up to 1,200ºF


SSPC: The Society for Protective Coatings
http://www.sspc.org/

Join SSPC and Enhance
Your Career !


Axxiom Manufacturing
The Undisputed
Industry Leader.

Proven Innovation. Job Performance. Industry Training. Workplace Safety. Only Schmidt® abrasive blast equipment by Axxiom Manufacturing delivers it all!


Monti Tools, Inc.
BRISTLE BLASTER® - THE ORIGINAL ONE

Surface cleanliness of SSPC-10 | Anchor profile
up to 4.7 mils | Removes corrosion & coatings |
ATEX approved for zone 1
| www.monti.com | 832-623-7970


Termarust Technologies
Termarust (HR CSA) Chemically Stops
Active Corrosion

Arch truss treated with Termarust's (HR CSA) in 2003. This steel arch bridge is rust free on all surfaces including the crevice corroded joints and connections.

 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2000-2016, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com