PaintSquare.com
      | Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise
  

 


SSPC-SP 15, Commercial Grade Power Tool Cleaning

All Standards | SSPC Standards
Search Standards


Click to Purchase and Download this Standard or Test Method

Revision Date: May 01, 2002
Updated On: May 01, 2002
Editorial Change: November 1, 2004
 
This standard covers the requirements for power tool cleaning to provide a commercial grade power tool cleaned steel surface and to retain or produce a minimum 25 micrometers (1.0 mil) surface profile.

This standard differs from SSPC-SP 3, Power Tool Cleaning, in that a higher degree of surface cleanliness is required and a minimum surface profile of 25 micrometers (1.0 mil) will be retained or produced.

This standard differs from SSPC-SP 11, Power Tool Cleaning to Bare Metal, in that stains of rust, paint, or mill scale may remain on the surface.

(Back to all Standards)

 
   

NLB Corporation
Handheld VertaJet for concrete or steel

Ergonomic VertaJet from NLB boosts surface prep productivity. See how rotating 40,000 psi water jets strip a 6” path and get into corners, with vacuum recovery.


NACE International, The Corrosion Society
Power On

Extend the life of your generation, transmission, and distribution systems by learning how to integrate corrosion control into your asset management plan.


Axxiom Manufacturing
Schmidt Improves
Portable Blasters

Schmidt's VBS System reduces blowdown intensity, prevents exhaust from damaging floor while using no screens or filters. Reduces sound; Increasing safety.
Call 1-800-231-2085


Atlantic Design, Inc.
ENGINEERING SOLUTIONS, NOT EXCUSES

See our website for features of our best seller, the ADI 3500CFM 4-Pot Blast Vacuum Recycler. A smaller package with all the ADI power you need. 866.Call.ADI


Novatek Corporation
Novatek Corporation, Dustless Coatings Removal

Strip, clean and profile all dust free! Comply with new lead standards. Contact today: (866) 563-7800


Advanced Recycling Systems
ADVANCED RECYCLING SYSTEMS (ARS)

Recycling Machines, Dust Collectors, Rapid Deployment units are time-tested and approved for the rugged industrial environment. Contact ARS today!
(330)536-8210


DeHumidification Technologies
HUMIDITY PROBLEMS?

DH Tech has the most innovative and reliable equipment available to
control humidity efficiently
and effectively.
IT'S UNDER CONTROL!


Desco Mfg. Co., Inc.
DUST-FREE SOLUTIONS For Lead Abatement

Tools operate at levels well below OSHA limits for hazardous material removal; meet SP11 specifications when required and low vibration tools increase productivity.


DRYCO
Humidity & Temperature Control Equipment

Rental Desiccant Dehumidifiers, ArcticDRY Units, Air Conditioners, Heaters and Generators to help control the climate on your next industrial painting project. Nationwide locations, 24/7 service: (866) 379-2600 www.drycogroup.com”


PreTox Products - NexTec, Inc.
GOT LEAD? Specify Pretox System products

The ONLY Lead Stabilizer Compatible with All Paint Removal Methods. Works with all Blast Media: Grits | Recyclable Abrasives | CO2 | Water | Power Tools | Etc. Call Dave Steffen at 800.338.8296.

 
 
 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2000-2016, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com